Study guide

1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands

Key Takeaways Explain This Topic AI

The ACER LANTITE Assessment Framework (2024 edition) distributes questions across three mathematical content areas: Number and Algebra (40–50%), Statistics and Probability (25–35%), and Measurement and Geometry (20–30%).

Every test item targets one of three cognitive numeracy processes: Using and applying mathematical knowledge (45–55%), Interpreting, evaluating, communicating, and representing mathematics (20–30%), or Identifying mathematical information and meaning (20–30%).

Problems are set across three realistic context domains: Personal and Community (~45–55%), Schools and Teaching (~30–40%), and Further Education and Professional Learning (~10–20%).

The national standard represents the minimum personal numeracy expected of graduating teachers, benchmarked as broadly equivalent to the top 30 per cent of the Australian adult population (an indicative range in the middle to upper part of Australian Core Skills Framework Level 4).

Results are equated psychometrically across test forms and reported in three Achievement Bands: Band 1 (below the standard), Band 2 (at and above the standard), and Band 3 (clearly above the standard).

Last updated: October 2026

Structure of the ACER LANTITE Assessment Framework (2024 Edition)

The ACER LANTITE Assessment Framework (2024 edition) defines personal numeracy as "interpreting and communicating important non-technical mathematical information and using such information to solve relevant real-world problems to participate in an education community, to achieve one's goals, and to develop one's knowledge and potential as a teacher." Rather than testing abstract symbol manipulation, every question is classified on four design dimensions:

Mathematical Content Area (Strand) — what mathematical concepts are required.

Numeracy Process — what cognitive action the candidate must perform.

Context Domain — what real-world setting frames the stimulus.

Calculator Availability — whether the item appears in Section 1 (calculator available) or Section 2 (calculator not available). The framework targets 75 – 85 % 75\text{–}85\% 75 – 85% of items for the calculator section and 15 – 25 % 15\text{–}25\% 15 – 25% for the no-calculator section; the current form uses 52 and 13 questions ( 80 % 80\% 80% and 20 % 20\% 20% ).

  • Dimension 1: Three Mathematical Content Areas (Strands)
  • 1. Number and Algebra (40–50% of Test | ~26–33 Questions)

Number and Algebra is the single largest content strand on the test, accounting for nearly half of all questions. It assesses fluency with:

Proportional Reasoning, Ratios, and Rates: Scaling recipes or classroom supplies, simplifying and dividing quantities in a given ratio, enforcing mandatory teacher-to-student supervision ratios, and working with compound rates such as speed ( km/h \text{km/h} km/h ), fuel consumption ( L/100 km \text{L/100 km} L/100 km ), and hourly pay rates (in $ per hour).

Percentages, Decimals, and Fractions: Converting fluently among fractions, decimals, and percentages; computing percentage increases, discounts, markups, and percentage change; and calculating Australia's 10% Goods and Services Tax (GST) (where a GST-inclusive price equals 1.10 1.10 1.10 times the pre-GST price, so dividing a GST-inclusive total by 11 11 11 isolates the exact GST component).

Financial Mathematics: Analysing household, personal, and school excursion budgets; comparing unit prices and multi-buy retail offers; calculating gross pay, overtime rates, income tax brackets, and superannuation contributions; and evaluating simple interest ( I = P r t I = Prt I = P r t ) and step-by-step compound interest schedules.

Algebraic Formulas and Relationships: Substituting numerical values into word formulas or symbolic rules, solving linear relationships, and interpreting step functions such as progressive shipping or venue-hire fee tables.

2. Statistics and Probability (25–35% of Test | ~16–23 Questions)

Statistics and Probability is the second largest content strand and reflects the heavy data-literacy demands of contemporary Australian schools:

Data Representation and Extraction: Reading and cross-referencing two-way frequency tables, stacked and grouped bar charts, line graphs, dual-axis charts, pie charts, scatter plots (including trend lines and outliers), histograms, stem-and-leaf plots, and box-and-whisker plots.

Summary Statistics and Educational Scales: Calculating and comparing measures of centre ( mean , median , and mode ) and measures of spread ( range and interquartile range [IQR] ); calculating weighted averages across assessment tasks; and interpreting quartiles, percentiles, five-number summaries, and standardized school reporting scales such as NAPLAN proficiency bands .

Chance and Probability: Determining single-event, complementary ( P ( not A ) = 1 − P ( A ) P(\text{not } A) = 1 - P(A) P ( not A ) = 1 − P ( A ) ), and compound probabilities using fractions, decimals, and percentages; conditional frequency probabilities from two-way tables; and expected frequencies over repeated trials.

3. Measurement and Geometry (20–30% of Test | ~13–20 Questions)

Measurement and Geometry evaluates practical spatial, temporal, and metric reasoning:

Metric Conversions and Derived Units: Converting accurately across metric prefixes for length ( mm , cm , m , km \text{mm}, \text{cm}, \text{m}, \text{km} mm , cm , m , km ), mass ( mg , g , kg , t \text{mg}, \text{g}, \text{kg}, \text{t} mg , g , kg , t ), and capacity/volume ( mL , L , kL , cm 3 , m 3 \text{mL}, \text{L}, \text{kL}, \text{cm}^3, \text{m}^3 mL , L , kL , cm 3 , m 3 ), where 1 cm 3 = 1 mL 1\text{ cm}^3 = 1\text{ mL} 1 cm 3 = 1 mL and 1 m 3 = 1,000 L 1\text{ m}^3 = 1{,}000\text{ L} 1 m 3 = 1 , 000 L .

Time, Timetables, and Time Zones: Calculating elapsed time across 12-hour ( am/pm \text{am/pm} am/pm ) and 24-hour clocks, reading bus/train/flight schedules and school bell timetables, and converting across Australian and international time zones (including Australian Eastern, Central, and Western Standard and Daylight Saving Times, where Central time uses a 30 30 30 -minute offset).

Mensuration, Scale, and Navigation: Computing perimeter, area of rectangles, triangles, circles, and composite classroom floor plans; surface area and volume of rectangular prisms and cylinders; reading map ratios (such as 1 : 25,000 1 : 25{,}000 1 : 25 , 000 ), grid references, and 8-point or 360-degree true bearings.

Dimension 2: Three Cognitive Numeracy Processes

Every question is also classified by the primary cognitive process required:

Identifying Mathematical Information and Meaning in Activities and Texts (20–30%): Extracting relevant numerical values, rules, thresholds, and conditions embedded inside written policies, fee schedules, timetables, or charts while filtering out distractor figures.

Using and Applying Mathematical Knowledge and Problem-Solving Processes (45–55%): Selecting the correct mathematical method, formulating a single-step or multi-step calculation sequence, and executing the arithmetic, proportional, or algebraic procedure accurately.

Interpreting, Evaluating, Communicating, and Representing Mathematics (20–30%): Assessing whether a numerical claim or statistical conclusion is supported by the data, comparing competing options against constraints, and judging the reasonableness of results.

Dimension 3: Three Real-World Context Domains

Stimulus materials are drawn from three authentic context areas relevant to pre-service and practising teachers:

Framework Dimension Category / Sub-Domain Target Weighting Approx. Questions (out of 65) Typical LANTITE Scenario Examples

Content Area Number and Algebra 40 – 50 % 40\text{–}50\% 40 – 50% 26 – 33 26\text{–}33 26 – 33 Budgets, GST, ratios, rates, discounts, wage/tax tables, formulas

Content Area Statistics and Probability 25 – 35 % 25\text{–}35\% 25 – 35% 16 – 23 16\text{–}23 16 – 23 NAPLAN box plots, two-way tables, weighted grades, mean/median, probability

Content Area Measurement and Geometry 20 – 30 % 20\text{–}30\% 20 – 30% 13 – 20 13\text{–}20 13 – 20 Metric conversions, 24-hour timetables, Australian time zones, floor plans, maps

Numeracy Process Using and Applying Knowledge 45 – 55 % 45\text{–}55\% 45 – 55% 29 – 36 29\text{–}36 29 – 36 Executing multi-step financial, proportional, or geometric calculations

Numeracy Process Interpreting, Evaluating & Communicating 20 – 30 % 20\text{–}30\% 20 – 30% 13 – 20 13\text{–}20 13 – 20 Evaluating data claims, interpreting graphs, checking policy compliance

Numeracy Process Identifying Mathematical Information 20 – 30 % 20\text{–}30\% 20 – 30% 13 – 20 13\text{–}20 13 – 20 Locating specific fee tiers, timetable constraints, or table intersections

Context Domain Personal and Community ≈ 45 – 55 % \approx 45\text{–}55\% ≈ 45 – 55% 29 – 36 29\text{–}36 29 – 36 Household bills, shopping/GST, travel schedules, recipes, civic/health statistics

Context Domain Schools and Teaching ≈ 30 – 40 % \approx 30\text{–}40\% ≈ 30 – 40% 20 – 26 20\text{–}26 20 – 26 Excursion coaching/ratios, student gradebooks, school athletics, NAPLAN data

Context Domain Further Education & Professional Learning ≈ 10 – 20 % \approx 10\text{–}20\% ≈ 10 – 20% 7 – 13 7\text{–}13 7 – 13 University fees/HECS-HELP, professional development hours, education research data

What Is In Scope: Non-Technical Mathematics, Item Formats, and Difficulty

The framework limits the test to non-technical mathematics : the everyday uses of mathematics that numerate adults meet, as opposed to procedures reserved for the study of mathematics itself. ACER gives two boundary examples:

In scope (non-technical) Out of scope (technical)

Reading given points on a curved graph of a real-world value, such as average daily maximum temperatures across a year Writing an equation, such as a quadratic, that could represent that curve

Substituting values into a given formula to find the area of a simple shape Using Pythagoras' theorem to calculate the side length of a triangle

So spend your preparation on proportional reasoning, measurement, data displays and given formulas rather than on algebraic manipulation or trigonometry.

Scored Items, Trial Items, and Response Formats

Each numeracy test has 60 scored items (48 calculator-available and 12 calculator-not-available) plus 5 unscored trial items . Items use three automatically scored formats:

Simple multiple choice: usually four options, one best answer.

Complex multiple choice: several statements, each answered with one of two or more responses such as Yes/No or True/False .

Constructed numeric response: you type a number into an answer box.

Target Difficulty Against the ACSF

ACER concentrates items around the benchmark and deliberately includes easier items so that it can describe what candidates below the standard can do:

  • ACSF Level Target share of numeracy items
  • Level 5 5 – 15 % 5\text{–}15\% 5 – 15%
  • Level 4 35 – 45 % 35\text{–}45\% 35 – 45%
  • Level 3 35 – 45 % 35\text{–}45\% 35 – 45%
  • Level 2 5 – 15 % 5\text{–}15\% 5 – 15%
  • Level 1 0 % 0\% 0%

Because roughly half the items are targeted at Level 3 or below, a well-prepared candidate should find many questions routine. The numeracy benchmark itself sits within Level 4, so the items near the pass line typically involve multi-step proportional reasoning, less familiar data displays, and measurement problems that combine rates, scales, and time.

  • The National Benchmark, Psychometric Equating, and Achievement Bands
  • The Top 30% Adult Population Standard

The LANTITE standard is established at the minimum level of personal literacy and numeracy expected of graduating teachers entering the Australian classroom. The benchmark is broadly equivalent to the top 30 per cent of the Australian adult population . ACER's 2013 numeracy expert panel set an indicative range in the middle to upper part of Australian Core Skills Framework (ACSF) Level 4 . A 2017 equating study against the OECD Programme for the International Assessment of Adult Competencies (PIAAC) located the top-30% point at a numeracy scale score of 110, and that standard has applied since Test Window 3 in 2017.

Why ACER Does Not Publish a Fixed Raw Pass Mark

Candidates often search for a single raw cutoff—such as "45 out of 65" or "70%". ACER does not use a fixed raw score because multiple secure test forms are administered across different days and test windows to preserve test security. Even when constructed to identical specifications, two test forms can differ slightly in average item difficulty. Through psychometric analysis, ACER places every question's difficulty on a common proficiency scale, and results are released only after that analysis and quality assurance are complete. A candidate sitting a marginally harder test form requires slightly fewer raw correct answers to reach the benchmark scale score than a candidate sitting a marginally easier form, guaranteeing that the standard remains identical for every candidate.

Statement of Test Results and Three Achievement Bands

When results are released, candidates receive an official Statement of Test Results reporting their overall outcome in one of three Achievement Bands :

Band 1: The candidate's score is below the test standard (the candidate has not yet met the national numeracy requirement).

Band 2: The candidate's score is at and above the test standard (the candidate has met the national numeracy requirement).

Band 3: The candidate's score is clearly above the test standard (the candidate has met the national numeracy requirement with a wide margin of proficiency).

Note

Using Sub-Domain Diagnostic Indicators: Alongside the overall Achievement Band, the Statement of Test Results displays performance indicators across the three content strands ( Number and Algebra , Measurement and Geometry , and Statistics and Probability ) and on the calculator-available and calculator-not-available parts of the test. If a result falls in Band 1 , prioritize Number and Algebra first (since it accounts for 40 – 50 % 40\text{–}50\% 40 – 50% of the entire test) alongside whichever secondary strand showed the lowest diagnostic indicator.

LANTITE Numeracy Content Strand Midpoint Weightings (%)