Study guide

1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

Key Takeaways Explain This Topic AI

LANTITE Numeracy uses selected-response items (multiple choice, usually with four options, and multi-statement True/False or Yes/No selections) and numeric-entry items; five of the 65 items are unscored trial items you cannot identify, and wrong answers lose no marks.

When a unit (such as $, %, km, or minutes) is shown beside a numeric-entry box, type only the number—ACER's system rejects non-numeric entries—and never round intermediate steps before the final rounding instruction.

Real-world constraints dictate directional whole-number rounding: round UP (ceiling) when finding minimum coaches or supervising adults required, and round DOWN (floor) when finding maximum complete items affordable within a strict budget.

ACER's Section 1 on-screen calculator follows the order of operations and has brackets, a % key, and Ans memory; use brackets or record subtotals on scratch paper, and check every result with a mental estimate.

Use a two-pass pacing approach in Section 1 to view all 52 items within 90–95 minutes, leaving 25–30 minutes for the 13 non-calculator questions in Section 2.

Last updated: October 2026

LANTITE Numeracy Item Formats

Questions in both sections appear in two core response formats. ACER's framework adds that 5 of the 65 numeracy items are unscored trial items; you cannot tell which ones, so give every question full effort:

Selected-Response Questions: These include simple multiple-choice items (usually four options, one correct) and complex multiple-choice items, where you choose a response for each of several statements—such as Yes/No , True/False , or True/False/Unable to determine —based on a shared chart or table.

Short-Answer Numeric Entry Questions: Instead of choosing from options, you type a calculated number directly into an on-screen text box. Because there are no multiple-choice options to alert you if you misplace a decimal point or misread a unit label, short-answer items require strict formatting and rounding discipline.

  • Precision, Formatting, and Rounding Rules for Short-Answer Entry
  • 1. Units Are Printed Outside the Input Box

Most numeric-entry boxes show the unit before or after the answer space—such as $, %, km, mL, hours, minutes, or students. ACER's practice-test instructions say almost all numeracy questions need a numeric response only, so type only the number (digits and, where required, a decimal point). A non-numeric entry triggers a pop-up warning and is not saved, so never type currency symbols, percentage signs, units, or words.

Always inspect the unit printed beside the box before typing your answer. A classic LANTITE trap provides stimulus dimensions in centimetres or minutes , while the label next to the answer box specifies metres or hours . Entering 150 when the box reads metres (instead of 1.5 ) turns a correct calculation into an incorrect response.

2. Preserve Full Precision Until the Final Step

In multi-step calculations, never round intermediate subtotals . Rounding a unit rate or intermediate decimal halfway through a four-step problem introduces cumulative rounding drift that can push your final digit outside the accepted scoring key. Keep full decimal precision on the on-screen calculator (and jot down at least 4–5 significant decimal digits on your scratch paper), then round only the final answer to the exact place value specified in the prompt:

"to one decimal place" (tenth): Look at the second decimal digit ( 24.36 → 24.4 24.36 \rightarrow 24.4 24.36 → 24.4 ).

"to two decimal places" (hundredth / nearest cent): Look at the third decimal digit ($18.426 rounds to $18.43).

"to the nearest whole number / whole dollar": Look at the first decimal digit ( 139.64 → 140 139.64 \rightarrow 140 139.64 → 140 ).

"to the nearest 5 cents": Applicable to Australian cash rounding rules ($14.32 rounds to $14.30; $14.33 rounds to $14.35).

3. Contextual Ceiling (Round Up) vs. Floor (Round Down) Constraints

When a problem asks for a physical count of people, vehicles, containers, or purchasable items, real-world constraints override standard nearest-integer ( 0.5 0.5 0.5 ) rounding:

Ceiling Rounding (Always Round Up to the Next Whole Integer): Required whenever every person or item must be accommodated or supervised, or a minimum target must be reached. For example, if 148 148 148 students are travelling on 45-seat buses, 148 ÷ 45 = 3.288... 148 \div 45 = 3.288... 148 ÷ 45 = 3.288... buses. Under standard rounding, 3.288 3.288 3.288 rounds down to 3 3 3 , but 3 3 3 buses hold only 135 135 135 students and leave 13 13 13 students behind. You must round up to 4 4 4 buses . The same ceiling rule applies to mandatory adult-to-student supervision ratios and minimum paint tins needed to coat a wall.

Floor Rounding (Always Round Down to the Completed Whole Integer): Required whenever a fixed budget, material length, or capacity cannot be exceeded. If a school department has a strict grant of $600.00 to purchase graphing calculators costing $44.00 each, 600 ÷ 44 = 13.636... 600 \div 44 = 13.636... 600 ÷ 44 = 13.636... calculators. Although 13.636 13.636 13.636 is closer to 14 14 14 , buying 14 14 14 calculators costs $616.00, which exceeds the grant. You must round down to 13 13 13 calculators .

Warning

Two High-Frequency Short-Answer Traps: Before leaving any short-answer question, verify (1) that the unit of your calculated number matches the unit printed outside the answer box, and (2) whether a fractional whole-number answer represents a minimum capacity/supervision requirement (round UP) or a maximum budget/resource cap (round DOWN).

Error Type What Goes Wrong on Test Day Prevention Protocol

Unit Label Mismatch Calculating elapsed time as 135 135 135 minutes when the box label reads hours (expecting 2.25 ). Circle or note the answer-box unit on your scratch paper before starting the calculation.

Forgetting Brackets on the On-Screen Calculator Typing 80 + 70 ÷ 2 = to average two scores: ACER's calculator follows the order of operations, so it shows 115 115 115 instead of 75 75 75 . Type (80 + 70) ÷ 2 = , or press = after the sum, write it down, then divide.

Premature Intermediate Rounding Rounding an intermediate unit cost from $2.346 to $2.35 before multiplying by 400 400 400 students (creating a $1.60 error). Keep full precision on screen and round only at the final step.

Standard Rounding Instead of Ceiling/Floor Rounding 4.22 4.22 4.22 coaches down to 4 4 4 coaches, leaving students without seats. Ask: "Does the leftover fraction require another full unit, or does it exceed a hard budget cap?"

  • Mastering the On-Screen Calculator and Two-Pass Pacing
  • Safe Operation of the Section 1 On-Screen Calculator

ACER designed the on-screen calculator specifically for this test, and its published guide ( The on-screen calculator , 2019) documents how it behaves:

Open and close it with the calculator icon at the top right of the screen; it closes automatically each time you move to the next question .

It follows the order of operations : 17.50 + 19.75 × 3 = gives 76.75 76.75 76.75 , whereas (17.50 + 19.75) × 3 = gives 111.75 111.75 111.75 .

The last result is stored in Ans for the next calculation, and the calculator icon beside an answer box copies the displayed result into that box.

The % key converts a percentage to a decimal: 15% × 1250 = gives 187.5 187.5 187.5 , but 1250 − 15% = gives 1249.85 1249.85 1249.85 , because it subtracts 0.15 0.15 0.15 rather than 15 % 15\% 15% of 1250 1250 1250 .

To eliminate input errors:

Use Brackets and Scratch Paper as External Memory: Bracket every numerator or group that must be evaluated first, and record each intermediate subtotal on your scratch paper rather than trusting a long, unbroken chain of keystrokes.

Convert Percentages to Decimal Multipliers: Avoid the % key trap by typing multipliers directly: use × 0.15 \times 0.15 × 0.15 to find 15 % 15\% 15% , use × 1.15 \times 1.15 × 1.15 to increase a value by 15 % 15\% 15% , and use × 0.85 \times 0.85 × 0.85 to apply a 15 % 15\% 15% discount (so 1250 × 0.85 = 1062.50 1250 \times 0.85 = 1062.50 1250 × 0.85 = 1062.50 ).

Run a 5-Second Mental Order-of-Magnitude Check: Before clicking Next , approximate the calculation using rounded front-end numbers. If you are multiplying 38 38 38 students by $24.50, mentally note that 40 × 25 = 1,000 40 \times 25 = 1{,}000 40 × 25 = 1 , 000 , so your exact answer ($931.00) must be just under $1,000. This immediately exposes a missed keystroke or misplaced decimal.

The Two-Pass Pacing Method

Section 1 — Pass 1 (Minutes 0 to 75): Move methodically from Question 1 to Question 52. Complete every straightforward single-step or two-step question immediately. If a question features a dense multi-table stimulus that will take more than 2.5 minutes, write down what you have decoded, enter your best reasoned answer, note the question number on your scratch paper, and move on. This guarantees you never run out of time before seeing the final 10–15 questions of Section 1.

Section 1 — Pass 2 (Minutes 75 to 92): Use the navigation bar at the top of the screen to return to the questions you noted and complete their calculations. Unanswered question numbers stay unshaded in the navigation bar, so check that all 52 are shaded.

Section 2 Execution (Final 28–30 Minutes): Confirm the one-way transition into Section 2 with 25–30 minutes left on the timer. Use benchmark decomposition ( 10 % , 5 % , 1 % , 25 % , 50 % 10\%, 5\%, 1\%, 25\%, 50\% 10% , 5% , 1% , 25% , 50% ), equivalent fractions, and neat column working on your scratch paper for the 13 non-calculator questions.

Tip

Never Leave Any Question Blank: LANTITE applies zero penalty for incorrect guesses. Before you click the confirmation button that permanently locks Section 1—and again before time expires in Section 2—ensure every multiple-choice and short-answer box contains a response.

  • Worked Walkthroughs: Section 1 vs. Section 2
  • Walkthrough 1: Section 1 Multi-Step Short-Answer Problem (Calculator Available)

Scenario: A primary school plans a Year 6 excursion to a science discovery centre for 112 112 112 students . School policy requires at least 1 1 1 supervising adult for every 12 12 12 students . The school hires 50-seat coaches at $640.00 per coach , and every student and supervising adult requires a coach seat. Entry to the centre costs $18.50 per student and is free for supervising adults . The school's Parents and Citizens (P&C) association contributes a flat subsidy of $550.00 toward total excursion costs. If the remaining cost is split equally among the 112 112 112 students, what is the cost per student, rounded to the nearest whole dollar ?

Minimum supervising adults (Ceiling Rounding): 112 ÷ 12 = 9.333... ⟹ 10 adults required 112 \div 12 = 9.333... \implies 10\text{ adults required} 112 ÷ 12 = 9.333... ⟹ 10 adults required

Total passengers and coaches required (Ceiling Rounding): Total passengers = 112 + 10 = 122 people \text{Total passengers} = 112 + 10 = 122\text{ people} Total passengers = 112 + 10 = 122 people 122 ÷ 50 = 2.44 ⟹ 3 coaches required 122 \div 50 = 2.44 \implies 3\text{ coaches required} 122 ÷ 50 = 2.44 ⟹ 3 coaches required

Total coach and entry expenses: Coach hire = 3 × 640 = 1,920 dollars \text{Coach hire} = 3 \times 640 = 1{,}920\text{ dollars} Coach hire = 3 × 640 = 1 , 920 dollars Student entry = 112 × 18.50 = 2,072 dollars \text{Student entry} = 112 \times 18.50 = 2{,}072\text{ dollars} Student entry = 112 × 18.50 = 2 , 072 dollars Gross total = 1,920 + 2,072 = 3,992 dollars \text{Gross total} = 1{,}920 + 2{,}072 = 3{,}992\text{ dollars} Gross total = 1 , 920 + 2 , 072 = 3 , 992 dollars

Subtract P&C subsidy and divide by 112 112 112 students (Full Precision): Net cost = 3,992 − 550 = 3,442 dollars \text{Net cost} = 3{,}992 - 550 = 3{,}442\text{ dollars} Net cost = 3 , 992 − 550 = 3 , 442 dollars Cost per student = 3,442 ÷ 112 = 30.7321... dollars \text{Cost per student} = 3{,}442 \div 112 = 30.7321...\text{ dollars} Cost per student = 3 , 442 ÷ 112 = 30.7321... dollars

Final rounding and numeric entry: Rounded to the nearest whole dollar, $30.7321... becomes $31 . Because the dollar sign is printed outside the box, type 31 .

Walkthrough 2: Section 2 Non-Calculator Mental-Strategy Problem

Scenario (No Calculator): A school uniform shop buys sports jackets for $40.00 each and applies a 35 % 35\% 35% markup to set the regular retail price. During an end-of-term sale, the shop offers a 15 % 15\% 15% discount off the regular retail price. What is the final sale price of the jacket?

Decompose the 35 % 35\% 35% markup on $40.00 mentally:

  • 10 % 10\% 10% of $40.00 is $4.00
  • 30 % 30\% 30% of $40.00 is 3 × 4.00 = 12.00 3 \times 4.00 = 12.00 3 × 4.00 = 12.00 ($12.00)
  • 5 % 5\% 5% of $40.00 is half of $4.00, which is $2.00
  • Total 35 % 35\% 35% markup is 12.00 + 2.00 = 14.00 12.00 + 2.00 = 14.00 12.00 + 2.00 = 14.00 ($14.00)
  • Regular retail price is 40.00 + 14.00 = 54.00 40.00 + 14.00 = 54.00 40.00 + 14.00 = 54.00 ($54.00)

Decompose the 15 % 15\% 15% discount off the new base of $54.00:

  • 10 % 10\% 10% of $54.00 is $5.40
  • 5 % 5\% 5% of $54.00 is half of $5.40, which is $2.70
  • Total 15 % 15\% 15% discount is 5.40 + 2.70 = 8.10 5.40 + 2.70 = 8.10 5.40 + 2.70 = 8.10 ($8.10)
  • Subtract discount from regular retail price: 54.00 − 8.10 = 45.90 54.00 - 8.10 = 45.90 54.00 − 8.10 = 45.90

The final sale price is $45.90 (notice that a 35 % 35\% 35% markup followed by a 15 % 15\% 15% discount is not a 20 % 20\% 20% net markup on $40.00, which would falsely give $48.00, because the 15 % 15\% 15% discount applies to the higher $54.00 retail price).