Study guide

6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes

Key Takeaways Explain This Topic AI

Before calculating the perimeter of an L-shaped or stepped building plan, deduce every unlabelled horizontal and vertical edge using parallel segment sums—never add only the printed numbers.

For circles ( C = 2 π r = π d C = 2\pi r = \pi d C = 2 π r = π d and A = π r 2 A = \pi r^2 A = π r 2 ), always check whether the question gives the full diameter d d d or the radius r = d / 2 r = d/2 r = d /2 ; a stadium running track combines two straight sides with two semicircular ends (one full circle).

In triangles ( A = 1 2 b h A = \frac{1}{2}bh A = 2 1 ​ bh ), parallelograms ( A = b h A = bh A = bh ), and trapeziums ( A = a + b 2 h A = \frac{a+b}{2}h A = 2 a + b ​ h ), the height h h h must be the perpendicular distance at 90 ∘ 90^\circ 9 0 ∘ to the base, never the slanted side length.

A path of uniform width w w w completely surrounding a rectangle of length L L L and width W W W adds 2 w 2w 2 w to both outer dimensions, giving outer area ( L + 2 w ) ( W + 2 w ) (L + 2w)(W + 2w) ( L + 2 w ) ( W + 2 w ) and path area ( L + 2 w ) ( W + 2 w ) − L W (L + 2w)(W + 2w) - LW ( L + 2 w ) ( W + 2 w ) − L W .

Last updated: October 2026

School budgeting and facilities projects frequently require two-dimensional geometry: fencing a playground perimeter, marking an athletics track, carpeting an L-shaped library, or ordering paint for a gymnasium wall with windows and doors. Distinguishing between one-dimensional boundary length ( perimeter ) and two-dimensional surface coverage ( area ) is the first essential step.

Perimeter of Polygons and Deducing Missing Side Lengths

The perimeter ( P P P ) of any closed plane figure is the total distance around its outer boundary, measured in linear units ( mm \text{mm} mm , cm \text{cm} cm , m \text{m} m , or km \text{km} km ).

The Missing-Side Trap on L-Shaped and T-Shaped Floor Plans

When a diagram shows an L-shaped, U-shaped, or stepped school building, two of the interior edges are often left unlabelled. A common error is adding only the numbers printed on the diagram. Because all corners meet at right angles ( 90 ∘ 90^\circ 9 0 ∘ ), you must deduce the missing sides first using the Parallel Segment Rule :

Horizontal Balance: The sum of all horizontal segments facing one way (e.g., top edges) equals the longest overall horizontal width at the base: W total = w 1 + w 2 + … W_{\text{total}} = w_1 + w_2 + \dots W total ​ = w 1 ​ + w 2 ​ + …

Vertical Balance: The sum of all vertical segments on one side equals the total vertical height on the opposite side: H total = h 1 + h 2 + … H_{\text{total}} = h_1 + h_2 + \dots H total ​ = h 1 ​ + h 2 ​ + …

Always write the deduced lengths directly onto the unlabelled edges and verify that the number of terms in your perimeter sum matches the total number of sides of the polygon (for example, 6 6 6 sides for an L-shape, 8 8 8 sides for a T-shape or U-shape).

Circles, Semicircles, Quarter-Circles, and Running Tracks

For a circle of radius r r r and diameter d = 2 r d = 2r d = 2 r , the boundary distance is called the circumference ( C C C ) and the interior surface is the area ( A A A ) : C = 2 π r = π d and A = π r 2 C = 2\pi r = \pi d \quad \text{and} \quad A = \pi r^2 C = 2 π r = π d and A = π r 2

Diameter vs. Radius Check: Before substituting into A = π r 2 A = \pi r^2 A = π r 2 , confirm whether the question states the diameter (distance right across the circle through the centre) or the radius (distance from the centre to the rim). If d = 14 m d = 14\text{ m} d = 14 m , halve it immediately to get r = 7 m r = 7\text{ m} r = 7 m .

Standalone Semicircles and Quarter-Circles: The curved arc of a semicircle has length π r \pi r π r (half of 2 π r 2\pi r 2 π r ), and its area is 1 2 π r 2 \frac{1}{2}\pi r^2 2 1 ​ π r 2 . However, if you are fencing a standalone semicircular garden bed, its total perimeter includes the straight diameter edge: P semicircle = π r + d = π r + 2 r P_{\text{semicircle}} = \pi r + d = \pi r + 2r P semicircle ​ = π r + d = π r + 2 r .

Stadium Running Tracks: A standard school athletics track consists of two parallel straight sides of length L L L joined by two semicircular ends of diameter d d d (radius r = d 2 r = \frac{d}{2} r = 2 d ​ ). Because the two semicircular ends join together to form one complete circle and the interior straight section forms a rectangle of L × d L \times d L × d : P track = 2 L + π d and A track = ( L × d ) + π r 2 P_{\text{track}} = 2L + \pi d \quad \text{and} \quad A_{\text{track}} = (L \times d) + \pi r^2 P track ​ = 2 L + π d and A track ​ = ( L × d ) + π r 2

Area Formulas for Core 2D Polygons

2D Shape Boundary / Perimeter Formula Area Formula Critical Exam Precaution

Rectangle P = 2 ( l + w ) P = 2(l + w) P = 2 ( l + w ) A = l w A = lw A = lw Ensure l l l and w w w are in the same linear unit before multiplying.

Square P = 4 s P = 4s P = 4 s A = s 2 A = s^2 A = s 2 Given area A A A , side length is s = A s = \sqrt{A} s = A ​ .

Triangle P = a + b + c P = a + b + c P = a + b + c A = 1 2 b h A = \frac{1}{2}bh A = 2 1 ​ bh Height h h h must be perpendicular ( 90 ∘ 90^\circ 9 0 ∘ ) to base b b b —never use a slant edge!

Parallelogram P = 2 ( a + b ) P = 2(a + b) P = 2 ( a + b ) A = b h A = bh A = bh Multiply base b b b by perpendicular height h h h , not by the tilted side a a a .

Trapezium P = a + b + c + d P = a + b + c + d P = a + b + c + d A = a + b 2 h A = \frac{a + b}{2}h A = 2 a + b ​ h Average the two parallel sides ( a a a and b b b ), then multiply by perpendicular height h h h .

Circle C = 2 π r = π d C = 2\pi r = \pi d C = 2 π r = π d A = π r 2 A = \pi r^2 A = π r 2 Halve diameter d d d to get radius r r r before squaring: r 2 = r × r r^2 = r \times r r 2 = r × r , not 2 r 2r 2 r .

Semicircle P = π r + 2 r P = \pi r + 2r P = π r + 2 r A = 1 2 π r 2 A = \frac{1}{2}\pi r^2 A = 2 1 ​ π r 2 Include the straight diameter 2 r 2r 2 r only when that edge is on the outer boundary.

Composite Area by Addition vs. Subtraction and Material Costing

Complex 2D surfaces are solved using one of two strategies:

Addition (Splitting): Slice an L-shaped room, gable wall (rectangle + triangle), or running track (rectangle + two semicircles) into non-overlapping simple shapes and add their areas.

Subtraction (Cut-Outs and Borders):

Walls with windows or doors: Calculate the gross wall area and subtract the area of every unpainted window, door, or whiteboard: A net = A gross − A cut-outs A_{\text{net}} = A_{\text{gross}} - A_{\text{cut-outs}} A net ​ = A gross ​ − A cut-outs ​ .

External Path or Frame of Uniform Width w w w : When a path of width w w w surrounds all four sides of a rectangular garden bed ( L × W L \times W L × W ), the path adds w w w on both the left and right ends and on both the top and bottom edges: L outer = L + 2 w , W outer = W + 2 w , A path = ( L + 2 w ) ( W + 2 w ) − L W L_{\text{outer}} = L + 2w, \quad W_{\text{outer}} = W + 2w, \quad A_{\text{path}} = (L + 2w)(W + 2w) - LW L outer ​ = L + 2 w , W outer ​ = W + 2 w , A path ​ = ( L + 2 w ) ( W + 2 w ) − L W

Converting Area into Paint, Turf, or Tile Orders

When ordering paint or surface coatings:

Multiply the net area by the number of coats to obtain the total coated area.

Divide the total coated area by the coverage rate (in m 2 /L \text{m}^2\text{/L} m 2 /L ) to find the exact number of litres needed.

Divide by the container size and always round up to the next whole tin so you do not run short.

  • Worked Examples in School Contexts
  • Worked Example 1: School Athletics Track Boundary and Turf Cost

A school sports field is shaped like a stadium running track with two straight parallel sides each 80 m 80\text{ m} 80 m long and two semicircular ends each with a diameter of 42 m 42\text{ m} 42 m . Using π ≈ 22 7 \pi \approx \frac{22}{7} π ≈ 7 22 ​ , find (a) the length of one complete lap around the outer boundary, and (b) the cost to re-turf the entire interior field at $14.50 per m 2 \text{m}^2 m 2 .

Identify radius and diameter: d = 42 m d = 42\text{ m} d = 42 m , so r = 42 ÷ 2 = 21 m r = 42 \div 2 = 21\text{ m} r = 42 ÷ 2 = 21 m .

Calculate perimeter (one lap): The two straight sides plus one full circle of circumference π d \pi d π d give: P = 2 ( 80 ) + 22 7 × 42 = 160 + 22 × 6 = 160 + 132 = 292 m P = 2(80) + \frac{22}{7} \times 42 = 160 + 22 \times 6 = 160 + 132 = 292\text{ m} P = 2 ( 80 ) + 7 22 ​ × 42 = 160 + 22 × 6 = 160 + 132 = 292 m

Calculate total interior area: Add the central 80 m × 42 m 80\text{ m} \times 42\text{ m} 80 m × 42 m rectangle and one full circle of area π r 2 \pi r^2 π r 2 : A = ( 80 × 42 ) + ( 22 7 × 21 × 21 ) = 3,360 + ( 22 × 3 × 21 ) = 3,360 + 1,386 = 4,746 m 2 A = (80 \times 42) + \left(\frac{22}{7} \times 21 \times 21\right) = 3{,}360 + (22 \times 3 \times 21) = 3{,}360 + 1{,}386 = 4{,}746\text{ m}^2 A = ( 80 × 42 ) + ( 7 22 ​ × 21 × 21 ) = 3 , 360 + ( 22 × 3 × 21 ) = 3 , 360 + 1 , 386 = 4 , 746 m 2

Calculate turf cost: 4,746 × 14.50 = 68,817.00 4{,}746 \times 14.50 = 68{,}817.00 4 , 746 × 14.50 = 68 , 817.00 ($68,817.00).

Worked Example 2: Painting a Hall Wall with Window Cut-Outs

A rectangular school hall wall is 15 m 15\text{ m} 15 m long and 4 m 4\text{ m} 4 m high. It contains two windows each measuring 2.5 m 2.5\text{ m} 2.5 m by 1.2 m 1.2\text{ m} 1.2 m and one double door measuring 2.0 m 2.0\text{ m} 2.0 m by 2.2 m 2.2\text{ m} 2.2 m . The wall requires 2 2 2 coats of washable acrylic paint with a spread rate of 12 m 2 /L 12\text{ m}^2\text{/L} 12 m 2 /L , sold in 4 L 4\text{ L} 4 L tins at $68 per tin. What is the total cost of the paint tins required?

Gross wall area: 15 × 4 = 60 m 2 15 \times 4 = 60\text{ m}^2 15 × 4 = 60 m 2 .

Cut-out areas: Two windows = 2 × ( 2.5 × 1.2 ) = 6.0 m 2 = 2 \times (2.5 \times 1.2) = 6.0\text{ m}^2 = 2 × ( 2.5 × 1.2 ) = 6.0 m 2 ; double door = 2.0 × 2.2 = 4.4 m 2 = 2.0 \times 2.2 = 4.4\text{ m}^2 = 2.0 × 2.2 = 4.4 m 2 . Total cut-outs = 6.0 + 4.4 = 10.4 m 2 = 6.0 + 4.4 = 10.4\text{ m}^2 = 6.0 + 4.4 = 10.4 m 2 .

Net area for 1 coat and 2 coats: A net = 60 − 10.4 = 49.6 m 2 A_{\text{net}} = 60 - 10.4 = 49.6\text{ m}^2 A net ​ = 60 − 10.4 = 49.6 m 2 . For 2 2 2 coats, total coverage = 2 × 49.6 = 99.2 m 2 = 2 \times 49.6 = 99.2\text{ m}^2 = 2 × 49.6 = 99.2 m 2 .

Litres and tins required: 99.2 ÷ 12 = 8.267 L 99.2 \div 12 = 8.267\text{ L} 99.2 ÷ 12 = 8.267 L . Dividing by 4 L 4\text{ L} 4 L per tin gives 8.267 ÷ 4 = 2.067 8.267 \div 4 = 2.067 8.267 ÷ 4 = 2.067 tins, which rounds up to 3 3 3 tins.

Total cost: 3 × 68 = 204 3 \times 68 = 204 3 × 68 = 204 ($204).