Study guide

4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling

Key Takeaways Explain This Topic AI

In direct proportion (y = kx), both quantities increase or decrease by the same factor, keeping the ratio y1/x1 = y2/x2 constant (used for recipe scaling, FTE salaries, map scales, and currency exchange).

A part-time teacher's pro-rata salary equals their Full-Time Equivalent (FTE) fraction multiplied by the 1.0 FTE base salary; divide the pro-rata salary by the FTE decimal to recover the 1.0 FTE base salary.

When an exchange rate is given as 1 AUD = r units of foreign currency, multiply by r to convert AUD to foreign currency and divide by r to convert foreign currency back to AUD.

In inverse proportion (x1 * y1 = x2 * y2), increasing the number of workers, teachers, or printers operating at the same rate proportionally decreases the time needed to complete a fixed job.

Last updated: October 2026

Direct Proportion ( y = k x y = kx y = k x )

Two quantities x x x and y y y are in direct proportion when multiplying x x x by a factor m m m multiplies y y y by the exact same factor m m m . Their quotient (the unit rate k k k ) remains constant: y 1 x 1 = y 2 x 2 = k ⟹ y 2 = y 1 × x 2 x 1 \frac{y_1}{x_1} = \frac{y_2}{x_2} = k \quad \Longrightarrow \quad y_2 = y_1 \times \frac{x_2}{x_1} x 1 ​ y 1 ​ ​ = x 2 ​ y 2 ​ ​ = k ⟹ y 2 ​ = y 1 ​ × x 1 ​ x 2 ​ ​

School Applications of Direct Proportion

Hospitality Recipe and Catering Scaling: If a school food-technology recipe for 16 scones 16\text{ scones} 16 scones requires 600 g 600\text{ g} 600 g of self-raising flour and 240 mL 240\text{ mL} 240 mL of milk, scaling the recipe up for 40 scones 40\text{ scones} 40 scones uses the scale factor 40 16 = 2.5 \frac{40}{16} = 2.5 16 40 ​ = 2.5 . The required flour is 600 g × 2.5 = 1,500 g 600\text{ g} \times 2.5 = 1{,}500\text{ g} 600 g × 2.5 = 1 , 500 g ( 1.5 kg 1.5\text{ kg} 1.5 kg ), and the required milk is 240 mL × 2.5 = 600 mL 240\text{ mL} \times 2.5 = 600\text{ mL} 240 mL × 2.5 = 600 mL .

Limiting-Ingredient Pantry Checks: Suppose a hospitality teacher has 3.3 kg 3.3\text{ kg} 3.3 kg ( 3,300 g 3{,}300\text{ g} 3 , 300 g ) of flour in the storeroom and uses the same recipe ( 600 g 600\text{ g} 600 g per 16 scones 16\text{ scones} 16 scones ). How many scones can be baked? Since 3,300 ÷ 600 = 5.5 batches 3{,}300 \div 600 = 5.5\text{ batches} 3 , 300 ÷ 600 = 5.5 batches , the teacher can make 5.5 × 16 = 88 scones 5.5 \times 16 = 88\text{ scones} 5.5 × 16 = 88 scones .

Pro-Rata FTE (Full-Time Equivalent) Teacher Salaries: In Australian schools, a full-time teaching load is 1.0 FTE 1.0\text{ FTE} 1.0 FTE ( 5 days per week 5\text{ days per week} 5 days per week , or 10 days per fortnight 10\text{ days per fortnight} 10 days per fortnight ). A teacher working 3 days per week 3\text{ days per week} 3 days per week has a 3 5 = 0.6 FTE \frac{3}{5} = 0.6\text{ FTE} 5 3 ​ = 0.6 FTE load. Salary and leave entitlements scale directly with FTE:

Finding pro-rata pay from full-time pay: Multiply the 1.0 FTE 1.0\text{ FTE} 1.0 FTE base salary by the FTE decimal. At a base salary of $92,000, a 0.6 FTE 0.6\text{ FTE} 0.6 FTE teacher earns 0.6 × 92,000 = 55,200 0.6 \times 92{,}000 = 55{,}200 0.6 × 92 , 000 = 55 , 200 , or $55,200.

Finding full-time pay from pro-rata pay: Divide the part-time salary by the FTE decimal. If a 0.8 FTE 0.8\text{ FTE} 0.8 FTE teacher earns $78,400, the 1.0 FTE 1.0\text{ FTE} 1.0 FTE base salary is 78,400 ÷ 0.8 = 98,000 78{,}400 \div 0.8 = 98{,}000 78 , 400 ÷ 0.8 = 98 , 000 , or $98,000.

Map and Floor-Plan Scales: On a school site plan drawn at a scale of 1 : 250 1 : 250 1 : 250 , every 1 cm 1\text{ cm} 1 cm on paper represents 250 cm = 2.5 m 250\text{ cm} = 2.5\text{ m} 250 cm = 2.5 m on the ground. A gymnasium measuring 14 cm 14\text{ cm} 14 cm long on the plan has an actual length of 14 × 2.5 m = 35 m 14 \times 2.5\text{ m} = 35\text{ m} 14 × 2.5 m = 35 m . Conversely, a 45 m 45\text{ m} 45 m oval boundary is drawn with length 45 ÷ 2.5 = 18 cm 45 \div 2.5 = 18\text{ cm} 45 ÷ 2.5 = 18 cm on the plan.

Currency Exchange for Overseas Study Tours

Currency conversion is a direct proportion problem. Exchange rates in Australian questions are normally quoted with 1 Australian dollar ( 1 AUD 1\text{ AUD} 1 AUD ) as the base unit—for example, 1 AUD = 96 JPY 1\text{ AUD} = 96\text{ JPY} 1 AUD = 96 JPY (Japanese yen) or 1 AUD = 0.62 EUR 1\text{ AUD} = 0.62\text{ EUR} 1 AUD = 0.62 EUR (euros). Foreign Currency = AUD × Rate , AUD = Foreign Currency Rate \text{Foreign Currency} = \text{AUD} \times \text{Rate}, \qquad \text{AUD} = \frac{\text{Foreign Currency}}{\text{Rate}} Foreign Currency = AUD × Rate , AUD = Rate Foreign Currency ​

Worked Example: Converting AUD to Yen and Back

A school organises a language immersion tour to Japan when the exchange rate is 1 AUD = 96 JPY 1\text{ AUD} = 96\text{ JPY} 1 AUD = 96 JPY .

Converting AUD to Foreign Currency (Multiply): A teacher converts $450 AUD into yen for group transport cards: 450 × 96 = 43,200 JPY 450 \times 96 = 43{,}200\text{ JPY} 450 × 96 = 43 , 200 JPY .

Converting Foreign Currency to AUD (Divide): A museum pass bundle for the group costs 14,400 JPY 14{,}400\text{ JPY} 14 , 400 JPY . To acquit the receipt in Australian dollars, divide by the exchange rate: 14,400 ÷ 96 = 150 14{,}400 \div 96 = 150 14 , 400 ÷ 96 = 150 , or $150 AUD.

Unspent Currency on Return: If the tour group returns to Australia with 11,760 JPY 11{,}760\text{ JPY} 11 , 760 JPY unspent and the currency booth buys back yen at 1 AUD = 98 JPY 1\text{ AUD} = 98\text{ JPY} 1 AUD = 98 JPY , the school receives 11,760 ÷ 98 = 120 11{,}760 \div 98 = 120 11 , 760 ÷ 98 = 120 , or $120 AUD.

Always apply a quick magnitude check: since 1 AUD 1\text{ AUD} 1 AUD buys 0.62 EUR 0.62\text{ EUR} 0.62 EUR (less than 1 EUR 1\text{ EUR} 1 EUR ), any euro price must correspond to a larger number of Australian dollars.

Inverse Proportion ( x 1 y 1 = x 2 y 2 x_1 y_1 = x_2 y_2 x 1 ​ y 1 ​ = x 2 ​ y 2 ​ )

Two quantities x x x and y y y are in inverse (indirect) proportion when a fixed total workload or capacity is shared: doubling x x x halves y y y , and multiplying x x x by m m m divides y y y by m m m . Instead of their ratio being constant, their product is constant: x 1 y 1 = x 2 y 2 = Total Work ⟹ y 2 = x 1 y 1 x 2 x_1 y_1 = x_2 y_2 = \text{Total Work} \quad \Longrightarrow \quad y_2 = \frac{x_1 y_1}{x_2} x 1 ​ y 1 ​ = x 2 ​ y 2 ​ = Total Work ⟹ y 2 ​ = x 2 ​ x 1 ​ y 1 ​ ​

Think of the constant product x 1 y 1 x_1 y_1 x 1 ​ y 1 ​ as the total job size measured in teacher-hours , student-days , or printer-minutes .

Feature Direct Proportion Inverse Proportion

Direction of Change As x x x increases, y y y increases by the same factor As x x x increases, y y y decreases by the reciprocal factor

Constant Quantity Constant quotient (unit rate): y 1 x 1 = y 2 x 2 \frac{y_1}{x_1} = \frac{y_2}{x_2} x 1 ​ y 1 ​ ​ = x 2 ​ y 2 ​ ​ Constant product (total work): x 1 y 1 = x 2 y 2 x_1 y_1 = x_2 y_2 x 1 ​ y 1 ​ = x 2 ​ y 2 ​

School Examples Recipe scaling, FTE salaries, map scales, currency exchange Teachers marking a fixed cohort of essays, printers running a fixed job, camp food provisions

Sanity Check More hours worked → \rightarrow → more pay earned More teachers marking → \rightarrow → less time required

Worked Example 1: Cohort Essay Marking (Teacher-Hours)

Three English teachers working at the same constant rate take 8 hours 8\text{ hours} 8 hours to mark all Year 10 examination essays. How long would it take 4 4 4 teachers working at that same rate to mark the same cohort of essays?

Common Trap: Setting up a direct ratio 4 3 × 8 = 10.67 hours \frac{4}{3} \times 8 = 10.67\text{ hours} 3 4 ​ × 8 = 10.67 hours , which falsely predicts that adding an extra teacher makes the marking take longer!

Correct Inverse Proportion Method:

Calculate total marking workload: 3 teachers × 8 hours = 24 teacher-hours 3\text{ teachers} \times 8\text{ hours} = 24\text{ teacher-hours} 3 teachers × 8 hours = 24 teacher-hours .

Divide the workload among 4 teachers 4\text{ teachers} 4 teachers : 24 teacher-hours ÷ 4 teachers = 6 hours 24\text{ teacher-hours} \div 4\text{ teachers} = 6\text{ hours} 24 teacher-hours ÷ 4 teachers = 6 hours .

Worked Example 2: Camp Food Provisions (Student-Days)

An outdoor education camp stocks enough food rations to feed 40 students 40\text{ students} 40 students for 6 days 6\text{ days} 6 days . If 8 additional students 8\text{ additional students} 8 additional students join the camp at the last minute (making 48 students 48\text{ students} 48 students in total) and no extra food is ordered, how many days will the rations last?

Total ration supply = 40 students × 6 days = 240 student-days = 40\text{ students} \times 6\text{ days} = 240\text{ student-days} = 40 students × 6 days = 240 student-days .

Duration for 48 students = 240 student-days ÷ 48 students = 5 days 48\text{ students} = 240\text{ student-days} \div 48\text{ students} = 5\text{ days} 48 students = 240 student-days ÷ 48 students = 5 days .

Joint Rate-Work-Time Problems

When both the number of machines and the number of items change, find the output rate of 1 machine in 1 unit of time first. For example, if 3 3 3 photocopiers print 3,600 3{,}600 3 , 600 exam booklets in 40 minutes 40\text{ minutes} 40 minutes , then 1 1 1 photocopier prints 3,600 ÷ 3 = 1,200 3{,}600 \div 3 = 1{,}200 3 , 600 ÷ 3 = 1 , 200 booklets in 40 minutes 40\text{ minutes} 40 minutes , which is 1,200 ÷ 40 = 30 booklets per minute 1{,}200 \div 40 = 30\text{ booklets per minute} 1 , 200 ÷ 40 = 30 booklets per minute . Consequently, 5 5 5 photocopiers print 5 × 30 = 150 booklets per minute 5 \times 30 = 150\text{ booklets per minute} 5 × 30 = 150 booklets per minute and will complete 6,000 6{,}000 6 , 000 booklets in 6,000 ÷ 150 = 40 minutes 6{,}000 \div 150 = 40\text{ minutes} 6 , 000 ÷ 150 = 40 minutes .

Loading diagram... Decision Flowchart: Direct vs. Inverse Proportion