Study guide

4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time

Key Takeaways Explain This Topic AI

Unlike a dimensionless ratio, a rate compares two quantities measured in different units (such as $/kg, L/100 km, words/min, or km/h) and must retain its compound unit.

To compare 'best buy' options in supermarkets or school stationery orders, standardize every package to the same unit rate (such as cost per 1 item, per 100 g, or per 1 L).

Australian vehicle fuel consumption is measured in litres per 100 kilometres (L/100 km): divide the trip distance by 100, multiply by the L/100 km rate to find total litres, and multiply by the price per litre.

Convert decimal hours to minutes by multiplying the decimal part by 60 (0.35 hours = 21 minutes, never 35 minutes), and calculate multi-stage average speed as Total Distance divided by Total Time, never the simple average of the speeds.

Last updated: October 2026

Ratios vs. Rates and Unit Pricing

While a ratio compares two quantities of the same kind (such as millilitres to millilitres) and has no units once simplified, a rate compares two quantities measured in different units —for example, dollars per kilogram ($ per kg \text{kg} kg ), words read per minute ( words/min \text{words/min} words/min ), litres per 100 kilometres 100\text{ kilometres} 100 kilometres ( L / 100 km \text{L}/100\text{ km} L /100 km ), or kilometres per hour ( km/h \text{km/h} km/h ).

A unit rate expresses how much of the first quantity corresponds to one single unit (or one standard benchmark block such as 100 g 100\text{ g} 100 g , 100 mL 100\text{ mL} 100 mL , or 100 km 100\text{ km} 100 km ) of the second quantity. For instance, if a Year 4 student reads 435 words 435\text{ words} 435 words in 3 minutes 3\text{ minutes} 3 minutes , dividing 435 ÷ 3 435 \div 3 435 ÷ 3 gives a unit reading fluency rate of 145 words/min 145\text{ words/min} 145 words/min .

Unit Pricing and "Best Buy" Comparisons

Australian supermarkets display unit prices—typically cost per 100 g 100\text{ g} 100 g , per 1 kg 1\text{ kg} 1 kg , or per 1 L 1\text{ L} 1 L —so consumers can compare value across different package sizes. School business managers use the same technique when ordering classroom consumables.

To determine the best buy:

Identify a convenient common unit (such as 1 exercise book 1\text{ exercise book} 1 exercise book , 100 g 100\text{ g} 100 g , or 1 L 1\text{ L} 1 L ).

Divide the price of each option by the number of those units in the package.

Compare the resulting unit prices; the lowest unit price is the best value for money.

Worked Example: Comparing Bulk Classroom Stationery Orders

A Year 5 coordinator needs to purchase A4 grid books and compares three supplier packages:

Pack A ( 10 books 10\text{ books} 10 books for $14.50): Unit cost is 14.50 ÷ 10 = 1.45 14.50 \div 10 = 1.45 14.50 ÷ 10 = 1.45 , or $1.45 per book.

Pack B ( 25 books 25\text{ books} 25 books for $33.00): Unit cost is 33.00 ÷ 25 = 1.32 33.00 \div 25 = 1.32 33.00 ÷ 25 = 1.32 , or $1.32 per book.

Carton C ( 60 books 60\text{ books} 60 books for $81.60): Unit cost is 81.60 ÷ 60 = 1.36 81.60 \div 60 = 1.36 81.60 ÷ 60 = 1.36 , or $1.36 per book.

Notice that the largest bulk option (Carton C at $1.36 per book) is not automatically the cheapest per unit; Pack B at $1.32 per book is the best buy.

Similarly, when comparing a 350 g 350\text{ g} 350 g tub of spread for $5.60 against a 600 g 600\text{ g} 600 g tub for $9.30, find the cost per 100 g 100\text{ g} 100 g :

350 g 350\text{ g} 350 g tub contains 3.5 lots of 100 g 3.5\text{ lots of }100\text{ g} 3.5 lots of 100 g : 5.60 ÷ 3.5 = 1.60 5.60 \div 3.5 = 1.60 5.60 ÷ 3.5 = 1.60 , or $1.60 per 100 g 100\text{ g} 100 g .

600 g 600\text{ g} 600 g tub contains 6 lots of 100 g 6\text{ lots of }100\text{ g} 6 lots of 100 g : 9.30 ÷ 6 = 1.55 9.30 \div 6 = 1.55 9.30 ÷ 6 = 1.55 , or $1.55 per 100 g 100\text{ g} 100 g (cheaper per 100 g 100\text{ g} 100 g ).

Australian Fuel Consumption ( L / 100 km \text{L}/100\text{ km} L /100 km )

In Australia, automotive fuel efficiency is rated in litres per 100 kilometres 100\text{ kilometres} 100 kilometres ( L / 100 km \text{L}/100\text{ km} L /100 km ) . A lower number indicates a more fuel-efficient vehicle. Fuel Required (L) = Distance (km) 100 × Consumption Rate (L/100 km) \text{Fuel Required (L)} = \frac{\text{Distance (km)}}{100} \times \text{Consumption Rate (L/100 km)} Fuel Required (L) = 100 Distance (km) ​ × Consumption Rate (L/100 km) Maximum Range (km) = Fuel Available (L) Consumption Rate (L/100 km) × 100 \text{Maximum Range (km)} = \frac{\text{Fuel Available (L)}}{\text{Consumption Rate (L/100 km)}} \times 100 Maximum Range (km) = Consumption Rate (L/100 km) Fuel Available (L) ​ × 100

Worked Example 1: Regional School Bus Trip Fuel Cost

A regional school mini-bus travels a 350 km 350\text{ km} 350 km round trip for an athletics carnival. The bus has an average fuel consumption of 11.4 L / 100 km 11.4\text{ L}/100\text{ km} 11.4 L /100 km , and diesel costs $1.95 per litre (often displayed on service station boards as 195.0 cents/L 195.0\text{ cents/L} 195.0 cents/L ).

Count how many 100 km 100\text{ km} 100 km blocks are in the trip: 350 100 = 3.5 blocks of 100 km \frac{350}{100} = 3.5\text{ blocks of }100\text{ km} 100 350 ​ = 3.5 blocks of 100 km .

Calculate total fuel required: 3.5 × 11.4 L = 39.9 L 3.5 \times 11.4\text{ L} = 39.9\text{ L} 3.5 × 11.4 L = 39.9 L .

Calculate total fuel cost: 39.9 × 1.95 = 77.805 39.9 \times 1.95 = 77.805 39.9 × 1.95 = 77.805 dollars, which rounds to $77.81 .

Worked Example 2: Finding Maximum Driving Range from Tank Capacity

Suppose a school utility vehicle has a 65 L 65\text{ L} 65 L fuel tank and consumes 10.4 L / 100 km 10.4\text{ L}/100\text{ km} 10.4 L /100 km on country highways. How far can it travel on one full tank? Maximum Range = 65 10.4 × 100 km = 6.25 × 100 km = 625 km \text{Maximum Range} = \frac{65}{10.4} \times 100\text{ km} = 6.25 \times 100\text{ km} = 625\text{ km} Maximum Range = 10.4 65 ​ × 100 km = 6.25 × 100 km = 625 km

Speed, Distance, and Time ( SDT \text{SDT} SDT )

Speed, distance, and time are linked by three equivalent rearrangements: Speed = Distance Time , Distance = Speed × Time , Time = Distance Speed \text{Speed} = \frac{\text{Distance}}{\text{Time}}, \qquad \text{Distance} = \text{Speed} \times \text{Time}, \qquad \text{Time} = \frac{\text{Distance}}{\text{Speed}} Speed = Time Distance ​ , Distance = Speed × Time , Time = Speed Distance ​

Conversion or Formula Task Rule / Operation Worked Example

Decimal hours to hours & minutes Multiply the decimal part by 60 60 60 2.35 h = 2 h + ( 0.35 × 60 ) min = 2 h 21 min 2.35\text{ h} = 2\text{ h} + (0.35 \times 60)\text{ min} = 2\text{ h }21\text{ min} 2.35 h = 2 h + ( 0.35 × 60 ) min = 2 h 21 min (never 2 h 35 min 2\text{ h }35\text{ min} 2 h 35 min )

Minutes to decimal hours Divide the minutes by 60 60 60 2 h 45 min = 2 + 45 60 = 2.75 h 2\text{ h }45\text{ min} = 2 + \frac{45}{60} = 2.75\text{ h} 2 h 45 min = 2 + 60 45 ​ = 2.75 h ; 20 min = 20 60 = 1 3 h 20\text{ min} = \frac{20}{60} = \frac{1}{3}\text{ h} 20 min = 60 20 ​ = 3 1 ​ h

Metres per second ( m/s \text{m/s} m/s ) to km/h \text{km/h} km/h Multiply by 3.6 3.6 3.6 A student sprinting at 8 m/s 8\text{ m/s} 8 m/s runs at 8 × 3.6 = 28.8 km/h 8 \times 3.6 = 28.8\text{ km/h} 8 × 3.6 = 28.8 km/h

Kilometres per hour ( km/h \text{km/h} km/h ) to m/s \text{m/s} m/s Divide by 3.6 3.6 3.6 A car travelling at 90 km/h 90\text{ km/h} 90 km/h moves at 90 ÷ 3.6 = 25 m/s 90 \div 3.6 = 25\text{ m/s} 90 ÷ 3.6 = 25 m/s

Multi-stage average speed Total Distance Total Time \frac{\text{Total Distance}}{\text{Total Time}} Total Time Total Distance ​ 60 km 60\text{ km} 60 km in 1.5 h 1.5\text{ h} 1.5 h plus 140 km 140\text{ km} 140 km in 2.0 h 2.0\text{ h} 2.0 h gives 200 km 3.5 h ≈ 57.14 km/h \frac{200\text{ km}}{3.5\text{ h}} \approx 57.14\text{ km/h} 3.5 h 200 km ​ ≈ 57.14 km/h

Critical Trap 1: Decimal Hours vs. Minutes

Because clocks use base- 60 60 60 ( 60 minutes = 1 hour 60\text{ minutes} = 1\text{ hour} 60 minutes = 1 hour ) rather than base- 100 100 100 , a calculator result such as 2.35 hours 2.35\text{ hours} 2.35 hours does not mean 2 hours 35 minutes 2\text{ hours }35\text{ minutes} 2 hours 35 minutes . Instead, take the decimal portion ( 0.35 0.35 0.35 ) and multiply by 60 60 60 : 0.35 × 60 = 21 minutes 0.35 \times 60 = 21\text{ minutes} 0.35 × 60 = 21 minutes , giving 2 hours 21 minutes 2\text{ hours }21\text{ minutes} 2 hours 21 minutes .

Conversely, if a teacher drives at 80 km/h 80\text{ km/h} 80 km/h for 1 hour 15 minutes 1\text{ hour }15\text{ minutes} 1 hour 15 minutes , never multiply 80 × 1.15 80 \times 1.15 80 × 1.15 . Convert 15 minutes 15\text{ minutes} 15 minutes to 15 60 = 0.25 hours \frac{15}{60} = 0.25\text{ hours} 60 15 ​ = 0.25 hours first, then compute 80 × 1.25 = 100 km 80 \times 1.25 = 100\text{ km} 80 × 1.25 = 100 km .

Converting Between m/s \text{m/s} m/s and km/h \text{km/h} km/h in Physical Education

Since 1 km = 1000 m 1\text{ km} = 1000\text{ m} 1 km = 1000 m and 1 hour = 3600 seconds 1\text{ hour} = 3600\text{ seconds} 1 hour = 3600 seconds , a speed of 1 m/s 1\text{ m/s} 1 m/s covers 3600 m = 3.6 km 3600\text{ m} = 3.6\text{ km} 3600 m = 3.6 km in one hour. If a secondary student runs the 100 m 100\text{ m} 100 m sprint in 12.5 seconds 12.5\text{ seconds} 12.5 seconds , their average speed in m/s \text{m/s} m/s is 100 ÷ 12.5 = 8 m/s 100 \div 12.5 = 8\text{ m/s} 100 ÷ 12.5 = 8 m/s . Multiplying by 3.6 3.6 3.6 converts this to 8 × 3.6 = 28.8 km/h 8 \times 3.6 = 28.8\text{ km/h} 8 × 3.6 = 28.8 km/h .

Critical Trap 2: Average Speed Across a Multi-Stage Journey

When a journey has two or more legs travelled at different speeds, the overall average speed is never the simple arithmetic mean of the speeds unless the time spent at each speed is identical. Always compute: Average Speed = Total Distance Total Time \text{Average Speed} = \frac{\text{Total Distance}}{\text{Total Time}} Average Speed = Total Time Total Distance ​

For example, if a teacher drives 60 km 60\text{ km} 60 km through suburban traffic at 40 km/h 40\text{ km/h} 40 km/h (taking 60 40 = 1.5 hours \frac{60}{40} = 1.5\text{ hours} 40 60 ​ = 1.5 hours ) and then 140 km 140\text{ km} 140 km on a freeway at 70 km/h 70\text{ km/h} 70 km/h (taking 140 70 = 2.0 hours \frac{140}{70} = 2.0\text{ hours} 70 140 ​ = 2.0 hours ), the total distance is 60 + 140 = 200 km 60 + 140 = 200\text{ km} 60 + 140 = 200 km and the total time is 1.5 + 2.0 = 3.5 hours 1.5 + 2.0 = 3.5\text{ hours} 1.5 + 2.0 = 3.5 hours . The true average speed is 200 ÷ 3.5 ≈ 57.14 km/h 200 \div 3.5 \approx 57.14\text{ km/h} 200 ÷ 3.5 ≈ 57.14 km/h , not 40 + 70 2 = 55 km/h \frac{40 + 70}{2} = 55\text{ km/h} 2 40 + 70 ​ = 55 km/h .

Worked Example 3: Excursion Latest Departure Time with a Rest Break

A school camp coach must arrive at Parliament House by 11 : 15 am 11:15\text{ am} 11 : 15 am after covering 210 km 210\text{ km} 210 km at an average driving speed of 75 km/h 75\text{ km/h} 75 km/h , plus a mandatory 25 -minute 25\text{-minute} 25 -minute driver rest stop. Driving time is 210 ÷ 75 = 2.8 hours = 2 hours 48 minutes 210 \div 75 = 2.8\text{ hours} = 2\text{ hours }48\text{ minutes} 210 ÷ 75 = 2.8 hours = 2 hours 48 minutes . Adding the 25 -minute 25\text{-minute} 25 -minute rest break gives a total journey duration of 3 hours 13 minutes 3\text{ hours }13\text{ minutes} 3 hours 13 minutes . Counting back 3 hours 13 minutes 3\text{ hours }13\text{ minutes} 3 hours 13 minutes from 11 : 15 am 11:15\text{ am} 11 : 15 am gives a latest departure time of 8 : 02 am 8:02\text{ am} 8 : 02 am .