Study guide

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing

Key Takeaways Explain This Topic AI

Always convert mixed metric quantities to the same (usually smaller) unit before simplifying a ratio so that the simplified ratio is a dimensionless comparison of whole numbers.

A two-part ratio a : b compares part to part; the corresponding part-to-whole fractions use the sum of all parts as the denominator: a/(a + b) and b/(a + b).

In the Unitary (1-Part) Method, identify which quantity is known (the total, a single share, or the difference between shares), divide by the matching number of parts to find 1 part, and then multiply.

For school excursion supervision ratios stated in a question (such as 1 : 12 for a water activity or 1 : 20 for a museum visit), always round the required number of teachers UP to the next whole integer so the maximum student-per-adult limit is never exceeded.

Last updated: October 2026

Understanding and Simplifying Ratios

A ratio compares the relative sizes of two or more quantities measured in the same unit . We write a two-part ratio as a : b a : b a : b (read "a to b") and a three-part ratio as a : b : c a : b : c a : b : c . Because the quantities share a common unit, the unit cancels out and a simplified ratio is dimensionless —it never carries a unit symbol.

Order is critical in every ratio question. If a primary school library stocks fiction to non-fiction books in the ratio 5 : 3 5 : 3 5 : 3 , the first number ( 5 5 5 ) belongs to fiction and the second number ( 3 3 3 ) belongs to non-fiction. Reversing the ratio to 3 : 5 3 : 5 3 : 5 changes the meaning completely.

Simplifying Integer, Decimal, Fraction, and Mixed-Unit Ratios

Like fractions, ratios are simplest when written using the smallest possible whole numbers whose highest common factor ( HCF \text{HCF} HCF ) is 1 1 1 . Four common simplification cases appear on the numeracy test:

Whole-number ratios: Divide every term by their HCF \text{HCF} HCF . For a three-part staff allocation of 24 : 36 : 60 24 : 36 : 60 24 : 36 : 60 , the HCF \text{HCF} HCF is 12 12 12 , giving: 24 : 36 : 60 → ÷ 12 2 : 3 : 5 24 : 36 : 60 \xrightarrow{\div 12} 2 : 3 : 5 24 : 36 : 60 ÷ 12 ​ 2 : 3 : 5

Mixed metric units: Convert both quantities to the smaller unit first so that decimals disappear, remove the unit labels, and divide by the HCF \text{HCF} HCF . For example, to simplify 400 mL : 1.2 L 400\text{ mL} : 1.2\text{ L} 400 mL : 1.2 L , convert 1.2 L 1.2\text{ L} 1.2 L into 1200 mL 1200\text{ mL} 1200 mL : 400 mL : 1.2 L = 400 mL : 1200 mL = 400 : 1200 → ÷ 400 1 : 3 400\text{ mL} : 1.2\text{ L} = 400\text{ mL} : 1200\text{ mL} = 400 : 1200 \xrightarrow{\div 400} 1 : 3 400 mL : 1.2 L = 400 mL : 1200 mL = 400 : 1200 ÷ 400 ​ 1 : 3

Similarly, to simplify 45 minutes : 2 hours 45\text{ minutes} : 2\text{ hours} 45 minutes : 2 hours , convert 2 hours 2\text{ hours} 2 hours into 120 minutes 120\text{ minutes} 120 minutes to get 45 : 120 45 : 120 45 : 120 , and divide by 15 15 15 to obtain 3 : 8 3 : 8 3 : 8 . Never attempt to simplify 400 : 1.2 400 : 1.2 400 : 1.2 or 45 : 2 45 : 2 45 : 2 before matching the units.

3. Decimal ratios: Multiply every term by 10 10 10 , 100 100 100 , or 1000 1000 1000 to clear all decimal places, then simplify. For 0.45 : 1.8 0.45 : 1.8 0.45 : 1.8 , multiply both terms by 100 100 100 to obtain 45 : 180 45 : 180 45 : 180 , then divide by 45 45 45 to get 1 : 4 1 : 4 1 : 4 .

4. Fractional ratios: Multiply every term by the lowest common denominator ( LCD \text{LCD} LCD ) of the fractions. To simplify 2 3 : 3 4 \frac{2}{3} : \frac{3}{4} 3 2 ​ : 4 3 ​ , multiply both terms by the LCD \text{LCD} LCD of 12 12 12 : ( 2 3 × 12 ) : ( 3 4 × 12 ) = 8 : 9 \left(\frac{2}{3} \times 12\right) : \left(\frac{3}{4} \times 12\right) = 8 : 9 ( 3 2 ​ × 12 ) : ( 4 3 ​ × 12 ) = 8 : 9

Combining Two Linked Ratios into a Three-Part Ratio

Occasionally a question gives two separate two-part ratios that share a common middle category—for example, in a literacy intervention program, the ratio of specialist teachers to learning support aides is 2 : 3 2 : 3 2 : 3 , and the ratio of learning support aides to students is 4 : 15 4 : 15 4 : 15 . To combine them into a single three-part ratio (teachers : aides : students), match the middle term (aides) using the lowest common multiple of 3 3 3 and 4 4 4 , which is 12 12 12 :

Scale 2 : 3 2 : 3 2 : 3 by multiplying by 4 ⟹ 8 : 12 4 \implies 8 : 12 4 ⟹ 8 : 12 .

Scale 4 : 15 4 : 15 4 : 15 by multiplying by 3 ⟹ 12 : 45 3 \implies 12 : 45 3 ⟹ 12 : 45 .

Combine to obtain 8 : 12 : 45 8 : 12 : 45 8 : 12 : 45 .

Part-to-Part Ratios vs. Part-to-Whole Fractions

One of the most frequent errors in test questions is confusing a part-to-part ratio with a part-to-whole fraction . When a ratio is written as a : b a : b a : b , the total number of equal parts in the whole is a + b a + b a + b , not b b b . First Share Fraction = a a + b , Second Share Fraction = b a + b \text{First Share Fraction} = \frac{a}{a + b}, \qquad \text{Second Share Fraction} = \frac{b}{a + b} First Share Fraction = a + b a ​ , Second Share Fraction = a + b b ​

For a three-part ratio a : b : c a : b : c a : b : c , the total number of parts is a + b + c a + b + c a + b + c , so the first share represents a a + b + c \frac{a}{a + b + c} a + b + c a ​ of the total.

Worked Example: Science Solution Mixing

A school laboratory technician prepares a plant nutrient solution by mixing concentrate with water in the ratio 2 : 7 2 : 7 2 : 7 .

Common Trap: Reading 2 : 7 2 : 7 2 : 7 and assuming concentrate makes up 2 7 \frac{2}{7} 7 2 ​ of the mixture.

Correct Method: Add the parts to find the whole: 2 + 7 = 9 total parts 2 + 7 = 9\text{ total parts} 2 + 7 = 9 total parts . Concentrate makes up 2 9 \frac{2}{9} 9 2 ​ of the total solution, and water makes up 7 9 \frac{7}{9} 9 7 ​ of the total solution. If the technician needs 3.6 L 3.6\text{ L} 3.6 L ( 3600 mL 3600\text{ mL} 3600 mL ) of diluted solution, the volume of concentrate required is 2 9 × 3600 mL = 800 mL \frac{2}{9} \times 3600\text{ mL} = 800\text{ mL} 9 2 ​ × 3600 mL = 800 mL , and the volume of water is 7 9 × 3600 mL = 2800 mL \frac{7}{9} \times 3600\text{ mL} = 2800\text{ mL} 9 7 ​ × 3600 mL = 2800 mL .

Conversely, if you are told that 3 8 \frac{3}{8} 8 3 ​ of a Year 6 cohort travel to school by bus and the remainder walk or are driven, the whole is 8 parts 8\text{ parts} 8 parts . Since 3 parts 3\text{ parts} 3 parts catch the bus, the remaining 8 − 3 = 5 parts 8 - 3 = 5\text{ parts} 8 − 3 = 5 parts do not. Thus, the part-to-part ratio of bus travellers to other students is 3 : 5 3 : 5 3 : 5 , not 3 : 8 3 : 8 3 : 8 .

Proportional Sharing: The Unitary (1-Part) Method

Proportional sharing questions always give you a ratio (such as a : b : c a : b : c a : b : c ) alongside one known dollar or physical quantity. Before calculating, identify which of the three problem structures applies, then find the value of 1 part .

Problem Structure What Quantity Is Given? How to Find the Value of 1 Part 1\text{ Part} 1 Part Worked School Scenario (Ratio 2 : 3 : 4 2 : 3 : 4 2 : 3 : 4 )

Type 1: Total Given The combined total across all shares Divide the total by the sum of all parts ( a + b + c a + b + c a + b + c ) A $4,500 arts grant is shared 2 : 3 : 4 2 : 3 : 4 2 : 3 : 4 across Drama, Music, and Visual Arts. Total parts = 2 + 3 + 4 = 9 = 2 + 3 + 4 = 9 = 2 + 3 + 4 = 9 . Value of 1 part 1\text{ part} 1 part is 4,500 ÷ 9 = 500 4{,}500 \div 9 = 500 4 , 500 ÷ 9 = 500 ($500). Shares are $1,000, $1,500, and $2,000.

Type 2: One Share Given The exact value of a single named part Divide the known share by that share's own part number Using the same 2 : 3 : 4 2 : 3 : 4 2 : 3 : 4 ratio, Music ( 3 parts 3\text{ parts} 3 parts ) receives $1,800. Value of 1 part 1\text{ part} 1 part is 1,800 ÷ 3 = 600 1{,}800 \div 3 = 600 1 , 800 ÷ 3 = 600 ($600). Total grant is 9 × 600 = 5,400 9 \times 600 = 5{,}400 9 × 600 = 5 , 400 ($5,400).

Type 3: Difference Given How much more (or less) one share is than another Divide by the difference in parts ( ∣ a − b ∣ \lvert a - b \rvert ∣ a − b ∣ ) Using 2 : 3 : 4 2 : 3 : 4 2 : 3 : 4 , Visual Arts ( 4 parts 4\text{ parts} 4 parts ) receives $700 more than Drama ( 2 parts 2\text{ parts} 2 parts ). Difference = 4 − 2 = 2 parts = 4 - 2 = 2\text{ parts} = 4 − 2 = 2 parts . Value of 1 part 1\text{ part} 1 part is 700 ÷ 2 = 350 700 \div 2 = 350 700 ÷ 2 = 350 ($350). Total grant is 9 × 350 = 3,150 9 \times 350 = 3{,}150 9 × 350 = 3 , 150 ($3,150).

Worked Example: Mixing Acrylic Paint by One Known Share

An art teacher mixes blue, yellow, and white paint in the ratio 3 : 5 : 2 3 : 5 : 2 3 : 5 : 2 to create a custom green tint. She uses 450 mL 450\text{ mL} 450 mL of yellow paint. How much total paint does she make?

Identify the given share: Yellow corresponds to the middle term, which is 5 parts 5\text{ parts} 5 parts .

Find the value of 1 part 1\text{ part} 1 part : 450 mL ÷ 5 = 90 mL 450\text{ mL} \div 5 = 90\text{ mL} 450 mL ÷ 5 = 90 mL .

Find the total parts: 3 + 5 + 2 = 10 parts 3 + 5 + 2 = 10\text{ parts} 3 + 5 + 2 = 10 parts .

Multiply to find the total volume: 10 × 90 mL = 900 mL 10 \times 90\text{ mL} = 900\text{ mL} 10 × 90 mL = 900 mL (consisting of 270 mL 270\text{ mL} 270 mL blue, 450 mL 450\text{ mL} 450 mL yellow, and 180 mL 180\text{ mL} 180 mL white).

Australian School Excursion Supervision Ratios

Supervision ratios are set by each state or territory education department, school sector, or school policy, and they vary with students' ages and the risk of the activity—water-based activities usually require more adults per student than a museum visit. A LANTITE question always states the ratio to use, so treat the ratios in this section as illustrative.

When calculating the minimum number of supervising teachers for N N N students at a ratio of 1 : k 1 : k 1 : k , divide N N N by k k k and always round UP to the next whole integer (ceiling rounding), even when the decimal part is less than 0.5 0.5 0.5 .

Worked Example: Comparing Water vs. Museum Supervision Ratios

A secondary school plans two excursions for 148 148 148 Year 9 students: a coastal marine water-safety day (mandatory ratio 1 : 12 1 : 12 1 : 12 ) and a history museum visit (mandatory ratio 1 : 20 1 : 20 1 : 20 ).

Marine excursion ( 1 : 12 1 : 12 1 : 12 ): Teachers = 148 12 = 12.333... → round UP 13 teachers \text{Teachers} = \frac{148}{12} = 12.333... \xrightarrow{\text{round UP}} 13\text{ teachers} Teachers = 12 148 ​ = 12.333... round UP ​ 13 teachers

If you rounded down to 12 teachers 12\text{ teachers} 12 teachers , those 12 12 12 adults could legally supervise at most 12 × 12 = 144 students 12 \times 12 = 144\text{ students} 12 × 12 = 144 students , leaving 4 students 4\text{ students} 4 students without compliant supervision.

Museum visit ( 1 : 20 1 : 20 1 : 20 ): Teachers = 148 20 = 7.4 → round UP 8 teachers \text{Teachers} = \frac{148}{20} = 7.4 \xrightarrow{\text{round UP}} 8\text{ teachers} Teachers = 20 148 ​ = 7.4 round UP ​ 8 teachers

Thus, the water activity requires 13 − 8 = 5 more supervising teachers 13 - 8 = 5\text{ more supervising teachers} 13 − 8 = 5 more supervising teachers than the museum visit for the exact same cohort.