Study guide

8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots

Key Takeaways Explain This Topic AI

In a dot plot of N observations, the mode is the horizontal scale value with the tallest stack of dots (not the dot count itself), and the exact median is the ((N + 1) / 2)-th dot counted in ascending order.

Histograms group continuous numerical data into adjacent class intervals (such as 60 <= x < 70); sum bar heights across multiple intervals to find frequencies for 'at least' or 'less than' thresholds.

In a cumulative frequency table or ogive, the count within a specific interval (a, b] equals CF(b) - CF(a), while the count strictly above b equals N - CF(b).

Always check the Key/Legend of a stem-and-leaf plot first (for example, 6 | 4 = 64 vs. 6 | 4 = 6.4) before reading any values.

In an ordered back-to-back stem-and-leaf plot, leaves on the right side increase from left to right, whereas leaves on the left side increase from right to left moving outward from the central stem.

Last updated: October 2026

When educators analyse the distribution of a single numerical variable—such as test marks, reading ages, or fitness scores—they choose between displays that preserve every individual score (dot plots and stem-and-leaf plots) and displays that summarise scores into class intervals (histograms and cumulative frequency curves).

Comparing Univariate Data Displays

Display Type Data Preserved Best Used For Key LANTITE Reading Rule

Dot Plot Exact individual values Small to moderate discrete datasets ( N ≤ 50 N \le 50 N ≤ 50 ) Mode is the axis value under the tallest stack; range ignores empty ticks at the ends of the axis.

Stem-and-Leaf Plot Exact individual values Moderate datasets ( 15 ≤ N ≤ 100 15 \le N \le 100 15 ≤ N ≤ 100 ); side-by-side cohort comparison Always check the Key first; on the left side of a back-to-back plot, leaves increase outward from the stem (right to left).

Histogram Grouped class intervals only Large continuous datasets ( N ≥ 50 N \ge 50 N ≥ 50 ) Bars touch with no gaps; sum bar heights across intervals and check boundary rules such as 60 ≤ x < 70 60 \le x < 70 60 ≤ x < 70 .

Cumulative Frequency (Ogive) Running totals ≤ \le ≤ upper boundary Finding percentiles, median ( Q 2 Q_2 Q 2 ​ ), quartiles ( Q 1 , Q 3 Q_1, Q_3 Q 1 ​ , Q 3 ​ ), and IQR \text{IQR} IQR Interval count in ( a , b ] (a, b] ( a , b ] is C F ( b ) − C F ( a ) CF(b) - CF(a) CF ( b ) − CF ( a ) ; count above b b b is N − C F ( b ) N - CF(b) N − CF ( b ) .

Dot Plots: Mode, Range, and Exact Median Position

In a dot plot , each dot plotted above a horizontal number line represents one observation (unless a key states otherwise, such as 1 dot = 2 students 1\text{ dot} = 2\text{ students} 1 dot = 2 students ). To analyse a dot plot systematically:

Sample size ( N N N ): Count the total number of dots across the entire plot.

Mode: Identify the horizontal scale value that has the tallest vertical column of dots. Do not report the number of dots in that column as the mode! For instance, if the value 4 books 4\text{ books} 4 books has 6 dots 6\text{ dots} 6 dots above it (the tallest stack), the mode is 4 books 4\text{ books} 4 books , not 6 6 6 .

Range: Subtract the lowest populated scale value from the highest populated scale value ( Max − Min \text{Max} - \text{Min} Max − Min ). If the printed axis runs from 0 0 0 to 10 10 10 but the lowest dot is at 2 2 2 and the highest dot is at 8 8 8 , the range is 8 − 2 = 6 8 - 2 = 6 8 − 2 = 6 (never 10 − 0 = 10 10 - 0 = 10 10 − 0 = 10 ).

Median: Locate the middle position N + 1 2 \frac{N + 1}{2} 2 N + 1 ​ and count dots in ascending order from left to right:

If N = 19 N = 19 N = 19 , the median is the 19 + 1 2 = 10 th \frac{19 + 1}{2} = 10\text{th} 2 19 + 1 ​ = 10 th dot.

If N = 20 N = 20 N = 20 , the median lies halfway between the 10 th 10\text{th} 10 th and 11 th 11\text{th} 11 th dots.

Clusters, gaps, and outliers: A cluster is a narrow interval where many dots bunch together; a gap is an interior range of scale values with zero dots; an outlier is an isolated dot separated from the main body of data by a wide gap.

Histograms vs. Cumulative Frequency Tables and Ogives

A histogram groups continuous numerical measurements into adjacent class intervals of equal width (such as 50 ≤ x < 60 50 \le x < 60 50 ≤ x < 60 , 60 ≤ x < 70 60 \le x < 70 60 ≤ x < 70 , 70 ≤ x < 80 70 \le x < 80 70 ≤ x < 80 ). Because exact individual scores are merged into bins, you cannot read the exact sample mean or exact individual minimum from a histogram alone, but you can:

Identify the modal class (the interval with the highest bar).

Sum bar heights across multiple intervals to find how many students scored "at least 70 70 70 " ( x ≥ 70 x \ge 70 x ≥ 70 ) or "less than 60 60 60 " ( x < 60 x < 60 x < 60 ), and divide by N N N to convert to a relative frequency percentage.

Locate the class interval containing the median by accumulating bar frequencies from the lowest interval upward until you pass the N + 1 2 \frac{N + 1}{2} 2 N + 1 ​ position.

Worked Example 1: Summing Histogram Intervals and Finding the Median Class

Suppose a histogram of Year 10 science exam scores ( N = 80 N = 80 N = 80 students) uses five intervals: 40 ≤ x < 50 40 \le x < 50 40 ≤ x < 50 ( 6 6 6 students), 50 ≤ x < 60 50 \le x < 60 50 ≤ x < 60 ( 14 14 14 students), 60 ≤ x < 70 60 \le x < 70 60 ≤ x < 70 ( 28 28 28 students), 70 ≤ x < 80 70 \le x < 80 70 ≤ x < 80 ( 20 20 20 students), and 80 ≤ x < 90 80 \le x < 90 80 ≤ x < 90 ( 12 12 12 students):

Percentage scoring at least 70 70 70 ( x ≥ 70 x \ge 70 x ≥ 70 ): Sum the top two bars ( 20 + 12 = 32 20 + 12 = 32 20 + 12 = 32 students) and divide by 80 80 80 : 32 80 × 100 % = 40 % \frac{32}{80} \times 100\% = 40\% 80 32 ​ × 100% = 40% .

Class interval containing the median: With N = 80 N = 80 N = 80 , the median lies between the 40 th 40\text{th} 40 th and 41 st 41\text{st} 41 st ordered scores. The first two bars accumulate 6 + 14 = 20 6 + 14 = 20 6 + 14 = 20 students, and adding the third bar ( 60 ≤ x < 70 60 \le x < 70 60 ≤ x < 70 ) brings the running total to 20 + 28 = 48 20 + 28 = 48 20 + 28 = 48 students. Since positions 21 21 21 through 48 48 48 all lie inside 60 ≤ x < 70 60 \le x < 70 60 ≤ x < 70 , the median falls in the 60 ≤ x < 70 60 \le x < 70 60 ≤ x < 70 interval.

Cumulative Frequency Tables and Ogives

A cumulative frequency table (or its graphical curve, called an ogive ) records the running total C F ( x ) CF(x) CF ( x ) of observations that fall at or below each upper boundary x x x . The final cumulative frequency always equals the total sample size N N N .

Suppose N = 200 N = 200 N = 200 Year 9 students sit a reading test with the following cumulative frequencies:

  • Score ≤ 50 \le 50 ≤ 50 : C F ( 50 ) = 24 CF(50) = 24 CF ( 50 ) = 24
  • Score ≤ 60 \le 60 ≤ 60 : C F ( 60 ) = 58 CF(60) = 58 CF ( 60 ) = 58
  • Score ≤ 70 \le 70 ≤ 70 : C F ( 70 ) = 130 CF(70) = 130 CF ( 70 ) = 130
  • Score ≤ 80 \le 80 ≤ 80 : C F ( 80 ) = 176 CF(80) = 176 CF ( 80 ) = 176
  • Score ≤ 90 \le 90 ≤ 90 : C F ( 90 ) = 200 CF(90) = 200 CF ( 90 ) = 200

From these running totals, we apply three fundamental rules:

Count within an interval ( a , b ] (a, b] ( a , b ] : Subtract consecutive cumulative totals: Students scoring 60 < x ≤ 70 = C F ( 70 ) − C F ( 60 ) = 130 − 58 = 72 students \text{Students scoring } 60 < x \le 70 = CF(70) - CF(60) = 130 - 58 = 72\text{ students} Students scoring 60 < x ≤ 70 = CF ( 70 ) − CF ( 60 ) = 130 − 58 = 72 students

Count strictly above a threshold b b b : Subtract C F ( b ) CF(b) CF ( b ) from the total cohort N N N : Students scoring x > 70 = N − C F ( 70 ) = 200 − 130 = 70 students ( 35 % ) \text{Students scoring } x > 70 = N - CF(70) = 200 - 130 = 70\text{ students } (35\%) Students scoring x > 70 = N − CF ( 70 ) = 200 − 130 = 70 students ( 35% )

Median and Interquartile Range ( IQR \text{IQR} IQR ) from an Ogive:

Lower Quartile ( Q 1 Q_1 Q 1 ​ , 25 th 25\text{th} 25 th percentile): Read across from 0.25 N = 50 0.25N = 50 0.25 N = 50 on the vertical cumulative frequency axis to the curve, then down to the score axis.

Median ( Q 2 Q_2 Q 2 ​ , 50 th 50\text{th} 50 th percentile): Read across from 0.50 N = 100 0.50N = 100 0.50 N = 100 on the vertical axis.

Upper Quartile ( Q 3 Q_3 Q 3 ​ , 75 th 75\text{th} 75 th percentile): Read across from 0.75 N = 150 0.75N = 150 0.75 N = 150 on the vertical axis.

Interquartile Range ( IQR \text{IQR} IQR ): Calculate IQR = Q 3 − Q 1 \text{IQR} = Q_3 - Q_1 IQR = Q 3 ​ − Q 1 ​ , which measures the spread of the middle 50 % 50\% 50% of scores.

Stem-and-Leaf Plots and the Back-to-Back Left-Side Trap

A stem-and-leaf plot splits each number into a leading stem (such as tens or ones) and a single-digit trailing leaf (such as ones or tenths). Always inspect the Key/Legend first: under Key: 6 | 4 = 64 , the entry represents 64 64 64 , whereas under Key: 6 | 4 = 6.4 , it represents 6.4 6.4 6.4 .

In a back-to-back stem-and-leaf plot , two groups share a central column of stems—with Group A plotted to the left of the stem and Group B plotted to the right of the stem. In an ordered plot, leaves always increase moving outward away from the central stem :

Right side (Group B): Leaves increase from left to right (e.g., | 6 | 1 3 8 represents 61 , 63 , 68 61, 63, 68 61 , 63 , 68 ).

Left side (Group A): Leaves increase from right to left moving outward from the central stem! Thus the row 9 5 2 | 6 | represents 62 , 65 , 69 62, 65, 69 62 , 65 , 69 in ascending order—where 2 (nearest the stem 6 ) is the smallest value in that row ( 62 62 62 ) and 9 (farthest to the left) is the largest value in that row ( 69 69 69 ).

When counting to the N + 1 2 th \frac{N+1}{2}\text{th} 2 N + 1 ​ th leaf to find the median of the left-hand group , start at the smallest stem and count leaves from the central stem outward to the left within each row.