Study guide

2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations

Key Takeaways Explain This Topic AI

Directed numbers represent position relative to a reference zero (such as 0 ∘ C 0^\circ\text{C} 0 ∘ C , sea level, or a budget break-even point); on a number line, − 2.4 ∘ C -2.4^\circ\text{C} − 2. 4 ∘ C is warmer (greater) than − 6.1 ∘ C -6.1^\circ\text{C} − 6. 1 ∘ C .

Subtracting a negative number is equivalent to adding a positive number ( a − ( − b ) = a + b a - (-b) = a + b a − ( − b ) = a + b ), so a temperature rise from − 4.5 ∘ C -4.5^\circ\text{C} − 4. 5 ∘ C to 13.2 ∘ C 13.2^\circ\text{C} 13. 2 ∘ C is 13.2 − ( − 4.5 ) = 17.7 ∘ C 13.2 - (-4.5) = 17.7^\circ\text{C} 13.2 − ( − 4.5 ) = 17. 7 ∘ C .

In BODMAS/BIMDAS, division and multiplication have equal priority and are evaluated strictly left to right ( 48 ÷ 6 × 2 = 16 48 \div 6 \times 2 = 16 48 ÷ 6 × 2 = 16 ), as are addition and subtraction ( 30 − 12 + 5 = 23 30 - 12 + 5 = 23 30 − 12 + 5 = 23 ).

Horizontal fraction bars create implicit brackets around the numerator and denominator; on the on-screen calculator, type those brackets or evaluate the top and bottom separately before dividing.

To recover an unknown starting value from a sequence of operations, work backwards from the final result using inverse operations in reverse order.

Last updated: October 2026

Directed Numbers in Real-World Contexts

Directed numbers (including positive and negative integers as well as signed decimals) encode both magnitude (distance from zero) and direction (above or below a reference baseline of 0 0 0 ). In school and community data, zero represents a chosen reference point rather than the absence of quantity:

Temperature Scales: Zero degrees Celsius ( 0 ∘ C 0^\circ\text{C} 0 ∘ C ) is the freezing point of water. A frosty Canberra winter overnight minimum of − 4.5 ∘ C -4.5^\circ\text{C} − 4. 5 ∘ C lies 4.5 ∘ C 4.5^\circ\text{C} 4. 5 ∘ C below freezing, whereas a daytime maximum of 13.2 ∘ C 13.2^\circ\text{C} 13. 2 ∘ C lies 13.2 ∘ C 13.2^\circ\text{C} 13. 2 ∘ C above freezing.

School Finance and Account Balances: A positive balance (+$1,250) represents a budget surplus or credit, whereas a negative balance (-$420) indicates a deficit, over-expenditure, or amount owing.

Cohort Benchmark Comparisons: Student assessment scores are often reported relative to a state or national benchmark (e.g., + 14 points +14\text{ points} + 14 points above the mean vs. − 9 points -9\text{ points} − 9 points below the mean).

Elevation and Depth: Mean sea level is defined as 0 m 0\text{ m} 0 m . Mount Kosciuszko stands at + 2 228 m +2\,228\text{ m} + 2 228 m , while Lake Eyre (Kati Thanda) lies at − 15 m -15\text{ m} − 15 m ( 15 m 15\text{ m} 15 m below sea level).

On a horizontal number line, numbers increase from left to right . Consequently, − 2.4 ∘ C -2.4^\circ\text{C} − 2. 4 ∘ C is warmer (greater) than − 6.1 ∘ C -6.1^\circ\text{C} − 6. 1 ∘ C because − 2.4 -2.4 − 2.4 sits to the right of − 6.1 -6.1 − 6.1 and is closer to zero, even though 6.1 6.1 6.1 has a larger absolute magnitude.

Arithmetic with Signed Numbers

Understanding how positive and negative signs interact prevents sign errors in both mental and calculator-assisted problems:

Adding a negative number moves left (downwards) on the number line and is equivalent to subtracting a positive number: a + ( − b ) = a − b a + (-b) = a - b a + ( − b ) = a − b . A canteen account with a surplus of $350 that incurs a loss of $120 has a new balance of 350 + ( − 120 ) = 350 − 120 = 230 350 + (-120) = 350 - 120 = 230 350 + ( − 120 ) = 350 − 120 = 230 ($230).

Subtracting a negative number reverses direction and is equivalent to adding a positive number : a − ( − b ) = a + b a - (-b) = a + b a − ( − b ) = a + b .

Multiplying or dividing signed numbers: When the two signs are the same (both positive or both negative), the result is positive ( − 6 × − 4 = + 24 -6 \times -4 = +24 − 6 × − 4 = + 24 and − 36 ÷ − 9 = + 4 -36 \div -9 = +4 − 36 ÷ − 9 = + 4 ). When the two signs are different , the result is negative ( − 6 × 4 = − 24 -6 \times 4 = -24 − 6 × 4 = − 24 and 36 ÷ − 9 = − 4 36 \div -9 = -4 36 ÷ − 9 = − 4 ).

Why Subtracting a Negative Equals Adding a Positive

To find the change or range between two directed values, always subtract the starting (or lower) value from the final (or higher) value: Change (or Range) = Final (or Higher) Value − Initial (or Lower) Value \text{Change (or Range)} = \text{Final (or Higher) Value} - \text{Initial (or Lower) Value} Change (or Range) = Final (or Higher) Value − Initial (or Lower) Value

Suppose Canberra's temperature rises from an overnight minimum of − 4.5 ∘ C -4.5^\circ\text{C} − 4. 5 ∘ C to a daytime maximum of 13.2 ∘ C 13.2^\circ\text{C} 13. 2 ∘ C . Warming from − 4.5 ∘ C -4.5^\circ\text{C} − 4. 5 ∘ C up to 0 ∘ C 0^\circ\text{C} 0 ∘ C requires an increase of + 4.5 ∘ C +4.5^\circ\text{C} + 4. 5 ∘ C , and warming from 0 ∘ C 0^\circ\text{C} 0 ∘ C to 13.2 ∘ C 13.2^\circ\text{C} 13. 2 ∘ C requires an additional + 13.2 ∘ C +13.2^\circ\text{C} + 13. 2 ∘ C : 13.2 − ( − 4.5 ) = 13.2 + 4.5 = 17.7 ∘ C 13.2 - (-4.5) = 13.2 + 4.5 = 17.7^\circ\text{C} 13.2 − ( − 4.5 ) = 13.2 + 4.5 = 17. 7 ∘ C

A frequent error is subtracting the positive magnitudes ( 13.2 − 4.5 = 8.7 ∘ C 13.2 - 4.5 = 8.7^\circ\text{C} 13.2 − 4.5 = 8. 7 ∘ C ), which ignores the 4.5 ∘ C 4.5^\circ\text{C} 4. 5 ∘ C climb from below zero up to zero. Likewise, the vertical distance between a coastal lookout at + 85 m +85\text{ m} + 85 m and a reef dive site at − 18 m -18\text{ m} − 18 m is 85 − ( − 18 ) = 85 + 18 = 103 m 85 - (-18) = 85 + 18 = 103\text{ m} 85 − ( − 18 ) = 85 + 18 = 103 m .

Order of Operations (BODMAS / BIMDAS)

When an expression combines multiple operations, evaluate them according to the hierarchy known in Australian schools as BODMAS (or BIMDAS ):

  • Priority Level Acronym Letter Operations Included Evaluation Rule
  • Priority 1 (Highest) B Brackets () , [] , and implicit fraction bars Evaluate innermost brackets first

Priority 2 O / I Orders / Indices (powers a n a^n a n and roots n \sqrt{n} n ​ ) Evaluate powers and square roots before multiplying

Priority 3 (Equal Tie) D and M Division ( ÷ \div ÷ ) and Multiplication ( × \times × ) Equal priority: evaluate strictly left to right

Priority 4 (Lowest Tie) A and S Addition ( + + + ) and Subtraction ( − - − ) Equal priority: evaluate strictly left to right

Caution

The Left-to-Right Equal-Priority Trap: In BODMAS/BIMDAS, D and M share the exact same priority, and A and S share the exact same priority. Multiplication does not automatically precede division, and addition does not precede subtraction. Always work left to right across tied operations:

Division and Multiplication: In 48 ÷ 6 × 2 48 \div 6 \times 2 48 ÷ 6 × 2 , divide on the left first ( 48 ÷ 6 = 8 48 \div 6 = 8 48 ÷ 6 = 8 ), then multiply ( 8 × 2 = 16 8 \times 2 = \mathbf{16} 8 × 2 = 16 ). Multiplying 6 × 2 = 12 6 \times 2 = 12 6 × 2 = 12 first gives the wrong answer ( 4 4 4 ).

Subtraction and Addition: In 30 − 12 + 5 30 - 12 + 5 30 − 12 + 5 , subtract on the left first ( 30 − 12 = 18 30 - 12 = 18 30 − 12 = 18 ), then add ( 18 + 5 = 23 18 + 5 = \mathbf{23} 18 + 5 = 23 ). Adding 12 + 5 = 17 12 + 5 = 17 12 + 5 = 17 first gives the wrong answer ( 13 13 13 ).

Implicit Brackets in Fractions and Basic Calculator Entry

A horizontal fraction bar acts as an implicit pair of brackets enclosing the entire numerator and the entire denominator: 36 + 12 10 − 4 = ( 36 + 12 ) ÷ ( 10 − 4 ) = 48 ÷ 6 = 8 \frac{36 + 12}{10 - 4} = (36 + 12) \div (10 - 4) = 48 \div 6 = 8 10 − 4 36 + 12 ​ = ( 36 + 12 ) ÷ ( 10 − 4 ) = 48 ÷ 6 = 8

Typing 36 + 12 ÷ 10 - 4 = continuously into a calculator without brackets produces the wrong result ( 33.2 33.2 33.2 on an order-aware calculator, or 0.8 0.8 0.8 on a sequential calculator). ACER's Section 1 on-screen calculator follows the order of operations, so it would show 33.2 33.2 33.2 . Either type the brackets— (36 + 12) ÷ (10 - 4) = —or evaluate the numerator ( 36 + 12 = 48 36 + 12 = 48 36 + 12 = 48 ) and the denominator ( 10 − 4 = 6 10 - 4 = 6 10 − 4 = 6 ) separately, write both down, and then divide ( 48 ÷ 6 = 8 48 \div 6 = 8 48 ÷ 6 = 8 ).

Working Backwards with Inverse Operations

When a word problem applies a chain of operations to an unknown starting value and gives the final result, recover the starting number by working backwards from the final figure using inverse operations in reverse chronological order :

The inverse of adding k k k is subtracting k k k (and vice versa).

The inverse of multiplying by k k k is dividing by k k k (and vice versa).

The inverse of squaring is taking the square root .

Tip

Worked Inverse Problem: A school library starts the term with an unknown number of laptops. After buying 15 15 15 new laptops, half of the combined fleet is allocated to Year 9, and 6 6 6 laptops are sent for repair, leaving 28 28 28 laptops in the trolley. How many laptops did the library have initially?

Forward chain: Start → + 15 Step 1 → ÷ 2 Step 2 → − 6 28 \text{Start} \xrightarrow{+15} \text{Step 1} \xrightarrow{\div 2} \text{Step 2} \xrightarrow{-6} 28 Start + 15 ​ Step 1 ÷ 2 ​ Step 2 − 6 ​ 28 .

Undo − 6 -6 − 6 (add 6 6 6 ): 28 + 6 = 34 28 + 6 = 34 28 + 6 = 34 laptops before repairs.

Undo ÷ 2 \div 2 ÷ 2 (multiply by 2 2 2 ): 34 × 2 = 68 34 \times 2 = 68 34 × 2 = 68 laptops after the new purchase.

Undo + 15 +15 + 15 (subtract 15 15 15 ): 68 − 15 = 53 laptops 68 - 15 = \mathbf{53\text{ laptops}} 68 − 15 = 53 laptops initially. (Check: ( 53 + 15 ) ÷ 2 − 6 = 28 (53 + 15) \div 2 - 6 = 28 ( 53 + 15 ) ÷ 2 − 6 = 28 .)