Study guide

2.3 Desktop Inventory, GIS Data & Field Reconnaissance

Landscape Architect Registration Examination L.A.R.E.

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Project Management, Legal Framework & Contracts

1.1 Professional Practice, Ethics & the HSW Mandate 1.2 Standard of Care, Responsible Charge & Sealing Documents 1.3 Professional Services Agreements & Contract Clauses 1.4 Fee Structures, Compensation Models & Billing 1.5 Project Scheduling, CPM & Budget Management 1.6 Risk Management, Professional Liability & Insurance

2 Chapter 2: Site Inventory, Surveying & Regulatory Framework

2.1 Boundary Surveys, Legal Descriptions & Survey Datums 2.2 Topographic Surveys, Easements & Encumbrances 2.3 Desktop Inventory, GIS Data & Field Reconnaissance 2.4 Policy Documents & Prior Planning Studies 2.5 Adjacent Land Use & Contextual Data Collection 2.6 Stakeholder Engagement & Public Participation 2.7 Zoning Frameworks, Dimensional Standards & FAR 2.8 Parking Standards, Buffer Yards & Zoning Relief 2.9 Clean Water Act Permitting & NEPA Review 2.10 ESA, Floodplain, Coastal & Historic Preservation Compliance

3 Chapter 3: Physical, Contextual & Environmental Site Analysis

3.1 Scoping Site Analysis & Synthesizing Opportunities and Constraints 3.2 Geotechnical Investigation & Soil Classification Systems 3.3 Problematic Soil Conditions & Agronomic Soil Quality 3.4 Topographic Interpretation & Slope Suitability 3.5 Watershed Mechanics, Stream Order & FEMA Flood Hazard Zones 3.6 Wetland Delineation, Classification & Riparian Buffers 3.7 Utility Analysis & Infrastructure Capacity 3.8 Visual Resource & Viewshed Analysis 3.9 Contextual Analysis: Appropriate Use & Future Development Impacts 3.10 Microclimates, Solar Orientation & Vegetation Analysis

4 Chapter 4: Stewardship, Climate Resiliency & Design Principles

4.1 SITES v2 & LEED Site Credit Rating Systems 4.2 Life-Cycle Assessment, Embodied Carbon & Ecosystem Services 4.3 Climate Resiliency, Adaptation & Urban Heat Island Mitigation 4.4 Environmental Justice & Social Equity in Site Design 4.5 Cultural Landscapes, Historic Preservation & Adaptive Reuse

5 Chapter 5: Master Planning, Programming & Land Use

5.1 Project Visioning, Goal Setting & Space Programming 5.2 Carrying Capacity Analysis & NRPA Park Classification Standards 5.3 Site Suitability Synthesis & Opportunities/Constraints Mapping 5.4 Land Use Allocation & Development Scenario Evaluation 5.5 Master Plan Deliverables & Design Guidelines 5.6 Capital Improvement Programming, Phasing & Implementation

6 Chapter 6: Schematic Design & Spatial Organization

6.1 Design Intent, Conceptual Diagrams & Form Generation 6.2 Basis of Design, Alternatives Evaluation & the Preferred Scheme 6.3 Spatial Hierarchy, Outdoor Rooms & Proportion 6.4 Pedestrian Circulation Networks & Environmental Wayfinding 6.5 ADA & PROWAG Accessible Route Design 6.6 Multimodal Transportation, Vehicular Circulation & Parking Layout

7 Chapter 7: Design Development, Materials & Planting Systems

7.1 Paving Systems: Rigid, Flexible & Unit Pavers 7.2 Retaining Walls, Earth Pressure & Wall Drainage 7.3 Wall System Selection, Fences, Screens & Gates 7.4 Site Furnishings: Selection, Materiality & Anchoring 7.5 Exterior Lighting, Photometrics, Dark Sky & Electrical Safety 7.6 Public Playground Safety: CPSC & ASTM Standards 7.7 Planting Design Principles & Ecological Matching 7.8 Water Conservation, Xeriscaping & Irrigation System Principles 7.9 Opinions of Probable Cost & Value Engineering

8 Chapter 8: Construction Drawings, Layout & Detailing

8.1 Drawing Set Hierarchy, Sheet Standards & Drafting Conventions 8.2 Interdisciplinary Coordination & QA/QC Review 8.3 Demolition Plans & Tree Protection Requirements 8.4 Site Preparation: Clearing, Grubbing, Topsoil & Utility Abandonment 8.5 Layout, Dimensioning & Materials Plans 8.6 Planting Plans, Plant Schedules & Installation Details 8.7 Technical Detailing: Pavements, Curbs & Joint Assemblies 8.8 Retaining Wall, Stair & Ramp Detailing Standards

9 Chapter 9: Construction Specifications & Bidding

9.1 CSI MasterFormat Divisions & SectionFormat Structure 9.2 Specification Writing Methods & the Drawings–Specifications Relationship 9.3 Project Manual, General Conditions & Front-End Documents 9.4 Bid Requirements, Bid Forms & Addenda Management 9.5 Pre-Bid Procedures, Bid Opening & Contractor Evaluation

10 Chapter 10: Construction Administration, Submittals & Changes

10.1 Pre-Construction Conference & Construction Administration Authority 10.2 Initial Decision Maker, Communication Protocols & Project Records 10.3 Submittals, Shop Drawings, Product Data & Samples 10.4 Requests for Information (RFIs) & Technical Clarifications 10.5 Change Orders, Construction Change Directives & Claims

11 Chapter 11: Field Observation, Quality Control & Close-Out

11.1 Field Observations, Site Reports & Non-Conforming Work 11.2 Quality Control, Material Testing & Inspections 11.3 Substantial Completion, Punch Lists & Retainage 11.4 Project Close-Out, Guarantees, Warranties & Final Acceptance

12 Chapter 12: Contour Interpretation, Grading & Earthwork Calculations

12.1 Contour Rules & Topographic Landform Interpretation 12.2 Spot Elevations & Contour Interpolation Calculations 12.3 Slope Formulas, Maximum Gradients & Cross Slopes 12.4 Earthwork Calculations: Average End Area & Grid Methods 12.5 Cut and Fill Balancing, Shrinkage, Swell & Mass Haul 12.6 Reviewing Grading Design: Error Detection & Constructability

13 Chapter 13: Stormwater Hydrology, Runoff & BMP Design

13.1 Hydrologic Cycle, Watershed Delineation & Time of Concentration 13.2 Peak Runoff Estimation: The Rational Method (Q = CiA) 13.3 NRCS Curve Number Method & Runoff Hydrographs 13.4 LID Principles, Water Quality Volume & Bioretention Design 13.5 Bioswales, Permeable Pavement, Green Roofs & Harvesting

14 Chapter 14: Site Drainage Systems, Hydraulics & Erosion Control

14.1 Open Channel Hydraulics, Manning’s Equation & Swale Design 14.2 Gutter Flow, Spread & Roadway Inlet Hydraulics 14.3 Subsurface Drainage, Catch Basins & Pipe Invert Calculations 14.4 Stormwater Storage: Detention, Retention & Water Quality Basins 14.5 Reviewing Drainage Plans & Evaluating Design Alternatives 14.6 Erosion Mechanics, RUSLE & the NPDES/SWPPP Framework 14.7 Erosion & Sediment Control BMPs, Basins & Site Stabilization

2.3 Desktop Inventory, GIS Data & Field Reconnaissance

Key Takeaways Explain This Topic AI

Site inventory proceeds from desktop data assembly to field reconnaissance, because field time is expensive and should be spent verifying and correcting desktop layers rather than rediscovering them.

Authoritative public repositories include the NRCS Web Soil Survey for soils, FEMA Flood Map Service Center for flood zones, the USFWS National Wetlands Inventory for mapped wetlands, and USGS for topography and hydrography.

NRCS Web Soil Survey and National Wetlands Inventory data are planning-level screening tools; neither substitutes for a site-specific geotechnical boring program or a jurisdictional wetland delineation.

A surveyed CAD drawing on a State Plane projection will not register against a regional GIS layer in a different projection or datum until both are transformed to a single declared coordinate system.

The base map is the single controlled drawing on which all inventory layers register, and it must carry the boundary source, datum, contour interval, and date of survey.

Last updated: September 2026

A thorough site inventory is the foundational prerequisite for sustainable land planning, site engineering, and ecological design. In landscape architectural practice, candidates must distinguish between two fundamental terms that CLARB rigorously tests:

Site Inventory: The objective, factual collection, mapping, and cataloging of all existing physical, biological, and cultural conditions on and surrounding a property parcel without evaluating their design suitability.

Site Analysis: The qualitative and quantitative evaluation of the inventory data to determine how existing site conditions present developmental opportunities and constraints relative to the proposed program.

Attempting site analysis or schematic layout without a rigorous baseline inventory invariably results in unforeseen subsurface complications, regulatory permitting delays, budget overruns, and severe public opposition.

Desktop Inventory vs. Field Reconnaissance

A professional site investigation follows a deliberate two-stage workflow : an initial desktop inventory followed by targeted on-site field reconnaissance. Two-Stage Site Investigation Workflow

  • +-------------------------------------------------------------------------+
  • | STAGE 1: DESKTOP INVENTORY |
  • | • Public GIS Data (Parcels, Zoning, Utilities) |
  • | • USDA NRCS Soil Surveys (SSURGO: Hydric soils, depth to bedrock) |
  • | • FEMA Flood Maps (NFHL: 100-year floodplains, floodways) |
  • | • USGS 3DEP Elevation & Hydrology (NHD) |
  • | • NOAA Atlas 14 Precipitation Data |
  • | • Historical Aerial Orthoimagery (Historic land uses / Brownfields) |
  • +-------------------------------------------------------------------------+
  • │
  • ▼ (Generates Preliminary Base Map & Checklists)
  • +-------------------------------------------------------------------------+
  • | STAGE 2: FIELD RECONNAISSANCE |
  • | • Ground-Truthing Desktop Data (Confirming wetlands, tree health) |
  • | • Empirical Primary Measurements (Test pits, percolation, GNSS points) |
  • | • Sensory Mapping (Viewshed quality, microclimates, noxious odors) |
  • | • Infrastructure Verification (Manhole inverts, overhead wires) |
  • | • Geotagged Photographic Documentation & Site Logs |
  • +-------------------------------------------------------------------------+
  • Primary vs. Secondary Data Sources

Primary Data: Information collected firsthand through direct empirical measurement, field observation, or original testing on the site. Examples include geotechnical soil test borings, percolation rates, topographic total station survey shots, health evaluations of specimen trees, traffic volume counts, and pedestrian intercept interviews.

Secondary Data: Pre-existing spatial, statistical, or environmental records compiled by government agencies, commercial vendors, or academic researchers for other purposes. Examples include USDA Web Soil Survey reports, USGS topographic quadrangle sheets, county tax assessor parcel maps, and municipal utility atlas drawings.

Exam Trap: Secondary data provides invaluable regional context, but it must never be used as the sole basis for construction documentation. For instance, the USDA Web Soil Survey was created at a broad landscape scale (1:12,000 to 1:24,000) for agricultural and regional planning. It cannot replace a site-specific geotechnical boring report when designing building foundations, retaining walls, or stormwater bioretention basins.

GIS Spatial Data Layers & Authoritative Public Repositories

Geographic Information Systems (GIS) synthesize multivariate spatial data layers into an interactive digital environment. Spatial data operates in two fundamental formats:

Vector Data: Represents discrete spatial entities using geometry:

Points: Specific coordinates (e.g., specimen trees, utility manholes, soil boring locations).

Lines / Polylines: Linear features (e.g., stream centerlines, property boundaries, contour lines, water mains).

Polygons: Enclosed areas (e.g., zoning districts, parcel boundaries, wetland limits, building footprints).

Raster Data: Represents continuous surfaces using a regular grid of pixel cells, where each cell contains a specific attribute value. Examples include aerial orthophotographs, digital satellite imagery, Digital Elevation Models (DEMs), and derived slope or solar radiation surfaces.

Authoritative Federal and Regional Data Sources

Agency / Repository Dataset Name Critical Data Layers for Landscape Architecture

USGS (US Geological Survey) 3DEP (3D Elevation Program) & NHD (National Hydrography Dataset) High-resolution LiDAR point clouds, Bare Earth Digital Elevation Models (DEM), 7.5-minute topographic quadrangles, perennial and intermittent stream centerlines, watershed hydrologic unit boundaries (HUC-8, HUC-12).

USDA NRCS (Natural Resources Conservation Service) WSS (Web Soil Survey) & SSURGO Soil map units, Hydrologic Soil Groups (A, B, C, D) , hydric soil status (wetland indicator), depth to seasonal high water table, depth to restrictive bedrock layer, slope gradient, and soil erodibility (K-factor).

FEMA (Federal Emergency Management Agency) NFHL (National Flood Hazard Layer) & FIRMs Special Flood Hazard Areas (SFHAs) , 100-year base floodplains (Zone A, AE), 500-year moderate hazard areas (Zone X shaded), regulatory floodway limits, Base Flood Elevations (BFEs), and Coastal High Hazard Areas (Zone VE).

NOAA (National Oceanic & Atmospheric Administration) Atlas 14 Precipitation Frequency Data Server Local rainfall depth-duration-frequency values for design storms (e.g., 2-, 10-, 25-, and 100-year 24-hour rainfall events) required for stormwater runoff modeling; Sea Level Rise (SLR) viewers.

USFWS (US Fish & Wildlife Service) NWI (National Wetlands Inventory) Pre-screened potential wetland classifications (Palustrine, Riverine, Estuarine) derived from high-altitude stereoscopic aerial imagery.

Local / County GIS Municipal Enterprise GIS & Tax Assessor Portals Legal property tax parcel boundaries, zoning overlay districts, rights-of-way (ROW) widths, existing public water distribution lines, sanitary sewer main lines, and stormwater catch basin rim/invert elevations.

Base Map Preparation & Field Reconnaissance Protocols

The base map is the master 2D or 3D digital drawing upon which all subsequent inventory mappings, site analyses, schematic concepts, and construction documents are overlaid. Preparing an accurate base map requires harmonizing disparate datasets into a uniform, verified coordinate environment.

Base Map Assembly Steps

Coordinate Harmonization: Project all spatial files into the project's designated State Plane Coordinate System (SPCS) and horizontal/vertical datum (e.g., NAD83, NAVD88).

Boundary Anchoring: Import the certified boundary survey from the licensed Professional Land Surveyor as the primary legal constraint layer.

Topography & Features: Overlay existing contours, breaklines, spot elevations, structures, utility easements, and mature trees (> 6 inches DBH).

Contextual Buffers: Include a surrounding contextual buffer extending at least 100 to 300 feet beyond parcel boundaries to capture off-site influences: adjacent building heights, driveways, street intersections, downstream drainage paths, and neighboring mature tree canopies.

Drawing Standardization: Establish a bold graphic scale, clear north arrow (differentiating true north, grid north, and magnetic north), sheet index, and title block containing revision dates.

Field Data Gathering Techniques

During on-site field visits, landscape architects verify desktop assumptions using specialized field instruments:

High-Accuracy GNSS Field Data Collectors: Handheld field computers equipped with GPS/GLONASS receivers using real-time SBAS or cellular RTK correction to capture field assets (e.g., unrecorded storm outfalls, invasive plant patches, bench locations) with sub-meter to centimeter precision.

Optical and Laser Tools: Handheld laser rangefinders (for measuring setbacks and building heights), Abney hand levels or clinometers (for verifying localized slope gradients), and diameter tapes (for measuring tree Diameter at Breast Height / DBH at 4.5 feet above grade).

Subsurface Probing: Hand augers and soil probes to quickly inspect topsoil depth, soil texture, compaction layers, and seasonal soil mottling (redoximorphic features indicating seasonal high water tables).

Systematic Photographic Documentation: Photographs must be keyed to a master site map indicating camera position and direction of view (cardinal direction). Photographers should capture wide-angle contextual panoramas paired with close-up macro shots of structural cracking, erosion rills, tree root defects, or drainage outfalls. Geotagged smartphone or digital camera images preserve location metadata in EXIF files.