Study guide
2.4 Policy Documents & Prior Planning Studies
Landscape Architect Registration Examination L.A.R.E.
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Project Management, Legal Framework & Contracts
1.1 Professional Practice, Ethics & the HSW Mandate 1.2 Standard of Care, Responsible Charge & Sealing Documents 1.3 Professional Services Agreements & Contract Clauses 1.4 Fee Structures, Compensation Models & Billing 1.5 Project Scheduling, CPM & Budget Management 1.6 Risk Management, Professional Liability & Insurance
2 Chapter 2: Site Inventory, Surveying & Regulatory Framework
2.1 Boundary Surveys, Legal Descriptions & Survey Datums 2.2 Topographic Surveys, Easements & Encumbrances 2.3 Desktop Inventory, GIS Data & Field Reconnaissance 2.4 Policy Documents & Prior Planning Studies 2.5 Adjacent Land Use & Contextual Data Collection 2.6 Stakeholder Engagement & Public Participation 2.7 Zoning Frameworks, Dimensional Standards & FAR 2.8 Parking Standards, Buffer Yards & Zoning Relief 2.9 Clean Water Act Permitting & NEPA Review 2.10 ESA, Floodplain, Coastal & Historic Preservation Compliance
3 Chapter 3: Physical, Contextual & Environmental Site Analysis
3.1 Scoping Site Analysis & Synthesizing Opportunities and Constraints 3.2 Geotechnical Investigation & Soil Classification Systems 3.3 Problematic Soil Conditions & Agronomic Soil Quality 3.4 Topographic Interpretation & Slope Suitability 3.5 Watershed Mechanics, Stream Order & FEMA Flood Hazard Zones 3.6 Wetland Delineation, Classification & Riparian Buffers 3.7 Utility Analysis & Infrastructure Capacity 3.8 Visual Resource & Viewshed Analysis 3.9 Contextual Analysis: Appropriate Use & Future Development Impacts 3.10 Microclimates, Solar Orientation & Vegetation Analysis
4 Chapter 4: Stewardship, Climate Resiliency & Design Principles
4.1 SITES v2 & LEED Site Credit Rating Systems 4.2 Life-Cycle Assessment, Embodied Carbon & Ecosystem Services 4.3 Climate Resiliency, Adaptation & Urban Heat Island Mitigation 4.4 Environmental Justice & Social Equity in Site Design 4.5 Cultural Landscapes, Historic Preservation & Adaptive Reuse
5 Chapter 5: Master Planning, Programming & Land Use
5.1 Project Visioning, Goal Setting & Space Programming 5.2 Carrying Capacity Analysis & NRPA Park Classification Standards 5.3 Site Suitability Synthesis & Opportunities/Constraints Mapping 5.4 Land Use Allocation & Development Scenario Evaluation 5.5 Master Plan Deliverables & Design Guidelines 5.6 Capital Improvement Programming, Phasing & Implementation
6 Chapter 6: Schematic Design & Spatial Organization
6.1 Design Intent, Conceptual Diagrams & Form Generation 6.2 Basis of Design, Alternatives Evaluation & the Preferred Scheme 6.3 Spatial Hierarchy, Outdoor Rooms & Proportion 6.4 Pedestrian Circulation Networks & Environmental Wayfinding 6.5 ADA & PROWAG Accessible Route Design 6.6 Multimodal Transportation, Vehicular Circulation & Parking Layout
7 Chapter 7: Design Development, Materials & Planting Systems
7.1 Paving Systems: Rigid, Flexible & Unit Pavers 7.2 Retaining Walls, Earth Pressure & Wall Drainage 7.3 Wall System Selection, Fences, Screens & Gates 7.4 Site Furnishings: Selection, Materiality & Anchoring 7.5 Exterior Lighting, Photometrics, Dark Sky & Electrical Safety 7.6 Public Playground Safety: CPSC & ASTM Standards 7.7 Planting Design Principles & Ecological Matching 7.8 Water Conservation, Xeriscaping & Irrigation System Principles 7.9 Opinions of Probable Cost & Value Engineering
8 Chapter 8: Construction Drawings, Layout & Detailing
8.1 Drawing Set Hierarchy, Sheet Standards & Drafting Conventions 8.2 Interdisciplinary Coordination & QA/QC Review 8.3 Demolition Plans & Tree Protection Requirements 8.4 Site Preparation: Clearing, Grubbing, Topsoil & Utility Abandonment 8.5 Layout, Dimensioning & Materials Plans 8.6 Planting Plans, Plant Schedules & Installation Details 8.7 Technical Detailing: Pavements, Curbs & Joint Assemblies 8.8 Retaining Wall, Stair & Ramp Detailing Standards
9 Chapter 9: Construction Specifications & Bidding
9.1 CSI MasterFormat Divisions & SectionFormat Structure 9.2 Specification Writing Methods & the Drawings–Specifications Relationship 9.3 Project Manual, General Conditions & Front-End Documents 9.4 Bid Requirements, Bid Forms & Addenda Management 9.5 Pre-Bid Procedures, Bid Opening & Contractor Evaluation
10 Chapter 10: Construction Administration, Submittals & Changes
10.1 Pre-Construction Conference & Construction Administration Authority 10.2 Initial Decision Maker, Communication Protocols & Project Records 10.3 Submittals, Shop Drawings, Product Data & Samples 10.4 Requests for Information (RFIs) & Technical Clarifications 10.5 Change Orders, Construction Change Directives & Claims
11 Chapter 11: Field Observation, Quality Control & Close-Out
11.1 Field Observations, Site Reports & Non-Conforming Work 11.2 Quality Control, Material Testing & Inspections 11.3 Substantial Completion, Punch Lists & Retainage 11.4 Project Close-Out, Guarantees, Warranties & Final Acceptance
12 Chapter 12: Contour Interpretation, Grading & Earthwork Calculations
12.1 Contour Rules & Topographic Landform Interpretation 12.2 Spot Elevations & Contour Interpolation Calculations 12.3 Slope Formulas, Maximum Gradients & Cross Slopes 12.4 Earthwork Calculations: Average End Area & Grid Methods 12.5 Cut and Fill Balancing, Shrinkage, Swell & Mass Haul 12.6 Reviewing Grading Design: Error Detection & Constructability
13 Chapter 13: Stormwater Hydrology, Runoff & BMP Design
13.1 Hydrologic Cycle, Watershed Delineation & Time of Concentration 13.2 Peak Runoff Estimation: The Rational Method (Q = CiA) 13.3 NRCS Curve Number Method & Runoff Hydrographs 13.4 LID Principles, Water Quality Volume & Bioretention Design 13.5 Bioswales, Permeable Pavement, Green Roofs & Harvesting
14 Chapter 14: Site Drainage Systems, Hydraulics & Erosion Control
14.1 Open Channel Hydraulics, Manning’s Equation & Swale Design 14.2 Gutter Flow, Spread & Roadway Inlet Hydraulics 14.3 Subsurface Drainage, Catch Basins & Pipe Invert Calculations 14.4 Stormwater Storage: Detention, Retention & Water Quality Basins 14.5 Reviewing Drainage Plans & Evaluating Design Alternatives 14.6 Erosion Mechanics, RUSLE & the NPDES/SWPPP Framework 14.7 Erosion & Sediment Control BMPs, Basins & Site Stabilization
2.4 Policy Documents & Prior Planning Studies
Key Takeaways Explain This Topic AI
Adopted policy documents establish the legal and political baseline for a site, so collecting them precedes both field reconnaissance and design.
A comprehensive (general) plan states long-range policy while the zoning ordinance implements it; where the two conflict, most states require the zoning map amendment to be brought into conformance with the comprehensive plan rather than the reverse.
Prior planning studies carry forward binding commitments such as proffers, development agreements, conditions of approval, and mitigation obligations that survive changes in ownership.
When documents conflict, the controlling one is determined by legal force first (ordinance over plan over study), then by effective date, not by which document is most convenient.
A document that has been adopted but is not yet effective does not govern current entitlement, but it does govern the schedule, so both versions must be tracked.
Last updated: September 2026
1. Why the Policy Layer Comes First
Site inventory tasks on the L.A.R.E. are sequenced deliberately: Collect Related Policy Documents and Assimilate Information from Previous Planning Processes sit at the front of the Inventory and Data Collection content area, ahead of fieldwork. The reason is economic and legal. Field reconnaissance is expensive and non-repeatable within a project budget, and a design developed without knowing what the jurisdiction has already committed to is a design that gets rejected at the first public hearing.
The policy layer answers three questions that the physical site cannot:
What is this land allowed to become? (adopted land use policy, zoning, overlays)
What has already been promised about it? (prior approvals, proffers, development agreements, mitigation commitments)
What is the jurisdiction already planning to do nearby? (capital improvement programs, corridor studies, transit plans)
2. The Standard Policy Document Set
Document Issued by What it controls Where it binds design
Comprehensive / General Plan Municipality or county Long-range land use, circulation, open space, housing policy Establishes the future land use designation a rezoning would be measured against
Zoning Ordinance & Map Municipality Permitted uses, dimensional envelope, parking, landscape standards Sets the buildable envelope directly
Subdivision Regulations Municipality or county Lot creation, street standards, dedications, improvements Governs public improvement design and required dedications
Capital Improvement Program (CIP) Governing body Funded public projects over a multi-year horizon Reveals adjacent road, utility, and park projects that change site context
Corridor, Small Area & Park Master Plans Planning agency Sub-area policy and design direction Often carries adopted design guidelines applicable to the site
FEMA Flood Insurance Rate Maps & Study FEMA Flood zone, Base Flood Elevation, floodway Regulatory constraint on grading and fill
Stormwater Management Ordinance / Manual State or local Release rates, water quality volume, BMP design criteria Fixes the stormwater performance target before design
Tree Preservation / Landscape Ordinance Municipality Protected tree criteria, replacement ratios, buffer yards Determines what existing vegetation can legally be removed
Exam framing: the comprehensive plan is policy ; the zoning ordinance is law . A proposal consistent with the comprehensive plan but inconsistent with current zoning is not approvable until the zoning is amended. A proposal consistent with zoning but inconsistent with the comprehensive plan is generally approvable as of right, because zoning is the operative regulation.
3. Assimilating Prior Planning Processes
"Assimilating" is a stronger verb than "reviewing." The task requires the landscape architect to extract from earlier work the three things that persist:
Binding commitments. Proffers, conditions of approval, development agreements, deed restrictions, conservation easements, and permit mitigation obligations run with the land. They survive a change of owner, designer, and market cycle. A prior approval that required a 50-foot undisturbed stream buffer still requires it even though the current zoning would allow 35 feet.
Technical work product. Earlier boundary and topographic surveys, geotechnical borings, wetland delineations, traffic studies, and archaeological surveys may still be usable, and knowing they exist prevents paying for them twice. Each carries an expiration in practice: a USACE preliminary jurisdictional determination and a wetland delineation have limited validity periods, and traffic counts age quickly.
Political history. Why did the previous proposal fail? An earlier plan that was withdrawn after neighborhood opposition to a particular access point tells the design team more about the approval path than any physical constraint will.
Practice note: request the project file from the planning department, not just the published documents. Staff reports, hearing minutes, and conditions of approval are public records and frequently contain the operative commitments that never appear on a map.
4. Reconciling Conflicts Between Documents
Conflicts between policy documents are routine, and the L.A.R.E. tests whether the candidate resolves them by rule rather than by preference.
Resolution order:
Legal force. State statute and federal regulation control over local ordinance; ordinance controls over adopted plan; adopted plan controls over an unadopted study or consultant report.
Specificity. Between two instruments of equal force, the more specific governs the general (an adopted small area plan over the citywide comprehensive plan for that sub-area).
Effective date. Between two instruments of equal force and specificity, the later effective date governs.
Stringency. Where two agencies both have jurisdiction and neither preempts the other, the more restrictive requirement controls. A state stormwater manual permitting an 18-inch media depth does not override a local manual requiring 24 inches.
The not-yet-effective trap. A jurisdiction may have adopted a new landscape ordinance with an effective date six months out. That ordinance does not govern an application vested under current rules, but it absolutely governs the project schedule and any application filed after the effective date. The candidate must track both and state which applies.
The superseded-copy trap. The most common real-world failure is designing to a PDF downloaded two years earlier. Every policy document cited in an inventory report should be recorded with its adoption date, amendment history, and the date it was retrieved.
5. Exam Traps & Pitfalls
Treating the comprehensive plan as regulatory. It is policy guidance. Designing to a future land use designation without a rezoning produces an unapprovable plan.
Assuming prior approvals expired with the prior owner. Conditions of approval and proffers run with the land.
Assuming the least restrictive agency wins. Where jurisdictions overlap without preemption, the more restrictive standard controls.
Reusing an old wetland delineation or jurisdictional determination past its validity period. Re-verification is required.
Skipping the CIP. A funded roadway widening adjacent to the site changes the right-of-way line, the access points, and the tree preservation plan.