Study guide

7.4 Site Furnishings: Selection, Materiality & Anchoring

Landscape Architect Registration Examination L.A.R.E.

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Project Management, Legal Framework & Contracts

1.1 Professional Practice, Ethics & the HSW Mandate 1.2 Standard of Care, Responsible Charge & Sealing Documents 1.3 Professional Services Agreements & Contract Clauses 1.4 Fee Structures, Compensation Models & Billing 1.5 Project Scheduling, CPM & Budget Management 1.6 Risk Management, Professional Liability & Insurance

2 Chapter 2: Site Inventory, Surveying & Regulatory Framework

2.1 Boundary Surveys, Legal Descriptions & Survey Datums 2.2 Topographic Surveys, Easements & Encumbrances 2.3 Desktop Inventory, GIS Data & Field Reconnaissance 2.4 Policy Documents & Prior Planning Studies 2.5 Adjacent Land Use & Contextual Data Collection 2.6 Stakeholder Engagement & Public Participation 2.7 Zoning Frameworks, Dimensional Standards & FAR 2.8 Parking Standards, Buffer Yards & Zoning Relief 2.9 Clean Water Act Permitting & NEPA Review 2.10 ESA, Floodplain, Coastal & Historic Preservation Compliance

3 Chapter 3: Physical, Contextual & Environmental Site Analysis

3.1 Scoping Site Analysis & Synthesizing Opportunities and Constraints 3.2 Geotechnical Investigation & Soil Classification Systems 3.3 Problematic Soil Conditions & Agronomic Soil Quality 3.4 Topographic Interpretation & Slope Suitability 3.5 Watershed Mechanics, Stream Order & FEMA Flood Hazard Zones 3.6 Wetland Delineation, Classification & Riparian Buffers 3.7 Utility Analysis & Infrastructure Capacity 3.8 Visual Resource & Viewshed Analysis 3.9 Contextual Analysis: Appropriate Use & Future Development Impacts 3.10 Microclimates, Solar Orientation & Vegetation Analysis

4 Chapter 4: Stewardship, Climate Resiliency & Design Principles

4.1 SITES v2 & LEED Site Credit Rating Systems 4.2 Life-Cycle Assessment, Embodied Carbon & Ecosystem Services 4.3 Climate Resiliency, Adaptation & Urban Heat Island Mitigation 4.4 Environmental Justice & Social Equity in Site Design 4.5 Cultural Landscapes, Historic Preservation & Adaptive Reuse

5 Chapter 5: Master Planning, Programming & Land Use

5.1 Project Visioning, Goal Setting & Space Programming 5.2 Carrying Capacity Analysis & NRPA Park Classification Standards 5.3 Site Suitability Synthesis & Opportunities/Constraints Mapping 5.4 Land Use Allocation & Development Scenario Evaluation 5.5 Master Plan Deliverables & Design Guidelines 5.6 Capital Improvement Programming, Phasing & Implementation

6 Chapter 6: Schematic Design & Spatial Organization

6.1 Design Intent, Conceptual Diagrams & Form Generation 6.2 Basis of Design, Alternatives Evaluation & the Preferred Scheme 6.3 Spatial Hierarchy, Outdoor Rooms & Proportion 6.4 Pedestrian Circulation Networks & Environmental Wayfinding 6.5 ADA & PROWAG Accessible Route Design 6.6 Multimodal Transportation, Vehicular Circulation & Parking Layout

7 Chapter 7: Design Development, Materials & Planting Systems

7.1 Paving Systems: Rigid, Flexible & Unit Pavers 7.2 Retaining Walls, Earth Pressure & Wall Drainage 7.3 Wall System Selection, Fences, Screens & Gates 7.4 Site Furnishings: Selection, Materiality & Anchoring 7.5 Exterior Lighting, Photometrics, Dark Sky & Electrical Safety 7.6 Public Playground Safety: CPSC & ASTM Standards 7.7 Planting Design Principles & Ecological Matching 7.8 Water Conservation, Xeriscaping & Irrigation System Principles 7.9 Opinions of Probable Cost & Value Engineering

8 Chapter 8: Construction Drawings, Layout & Detailing

8.1 Drawing Set Hierarchy, Sheet Standards & Drafting Conventions 8.2 Interdisciplinary Coordination & QA/QC Review 8.3 Demolition Plans & Tree Protection Requirements 8.4 Site Preparation: Clearing, Grubbing, Topsoil & Utility Abandonment 8.5 Layout, Dimensioning & Materials Plans 8.6 Planting Plans, Plant Schedules & Installation Details 8.7 Technical Detailing: Pavements, Curbs & Joint Assemblies 8.8 Retaining Wall, Stair & Ramp Detailing Standards

9 Chapter 9: Construction Specifications & Bidding

9.1 CSI MasterFormat Divisions & SectionFormat Structure 9.2 Specification Writing Methods & the Drawings–Specifications Relationship 9.3 Project Manual, General Conditions & Front-End Documents 9.4 Bid Requirements, Bid Forms & Addenda Management 9.5 Pre-Bid Procedures, Bid Opening & Contractor Evaluation

10 Chapter 10: Construction Administration, Submittals & Changes

10.1 Pre-Construction Conference & Construction Administration Authority 10.2 Initial Decision Maker, Communication Protocols & Project Records 10.3 Submittals, Shop Drawings, Product Data & Samples 10.4 Requests for Information (RFIs) & Technical Clarifications 10.5 Change Orders, Construction Change Directives & Claims

11 Chapter 11: Field Observation, Quality Control & Close-Out

11.1 Field Observations, Site Reports & Non-Conforming Work 11.2 Quality Control, Material Testing & Inspections 11.3 Substantial Completion, Punch Lists & Retainage 11.4 Project Close-Out, Guarantees, Warranties & Final Acceptance

12 Chapter 12: Contour Interpretation, Grading & Earthwork Calculations

12.1 Contour Rules & Topographic Landform Interpretation 12.2 Spot Elevations & Contour Interpolation Calculations 12.3 Slope Formulas, Maximum Gradients & Cross Slopes 12.4 Earthwork Calculations: Average End Area & Grid Methods 12.5 Cut and Fill Balancing, Shrinkage, Swell & Mass Haul 12.6 Reviewing Grading Design: Error Detection & Constructability

13 Chapter 13: Stormwater Hydrology, Runoff & BMP Design

13.1 Hydrologic Cycle, Watershed Delineation & Time of Concentration 13.2 Peak Runoff Estimation: The Rational Method (Q = CiA) 13.3 NRCS Curve Number Method & Runoff Hydrographs 13.4 LID Principles, Water Quality Volume & Bioretention Design 13.5 Bioswales, Permeable Pavement, Green Roofs & Harvesting

14 Chapter 14: Site Drainage Systems, Hydraulics & Erosion Control

14.1 Open Channel Hydraulics, Manning’s Equation & Swale Design 14.2 Gutter Flow, Spread & Roadway Inlet Hydraulics 14.3 Subsurface Drainage, Catch Basins & Pipe Invert Calculations 14.4 Stormwater Storage: Detention, Retention & Water Quality Basins 14.5 Reviewing Drainage Plans & Evaluating Design Alternatives 14.6 Erosion Mechanics, RUSLE & the NPDES/SWPPP Framework 14.7 Erosion & Sediment Control BMPs, Basins & Site Stabilization

7.4 Site Furnishings: Selection, Materiality & Anchoring

Key Takeaways Explain This Topic AI

Site furnishings must be surface-mounted, embedded, or freestanding by deliberate choice, because anchoring method determines theft resistance, frost behavior, and whether the pavement must be cut to relocate them.

An effective bicycle rack supports the frame at two points and allows a U-lock to capture the frame and a wheel; wave and comb racks that support only a wheel fail this test.

Exterior metals are selected by corrosion mechanism: weathering steel forms a stable patina but stains adjacent light-colored paving, galvanized steel sacrifices zinc, and stainless resists chloride pitting only in the higher alloy grades.

Hostile vehicle mitigation bollards are specified by tested crash rating (vehicle mass, impact speed, and allowable penetration), not by diameter or appearance.

Wood furnishings require a stated species, grade, and finish maintenance interval in the specification, since the maintenance obligation, not the initial cost, determines lifespan.

Last updated: September 2026

Core Focus: This section synthesizes site furnishings selection, exterior electrical and photometric engineering, Dark Sky lighting design, and life-safety playground compliance under ASTM and CPSC standards. Mastery of these physical and statutory criteria is essential for passing the Design Development domain of LARE Section 2.

1. Site Furnishings: Selection, Materiality & Anchoring

Site furnishings define the human interface of the landscape. They must withstand relentless environmental weathering, public abuse, vandalism, and intense mechanical wear while satisfying strict anthropometric and universal accessibility criteria.

Benches & Ergonomic Standards

Ergonomics: Standard seating dimensions require a seat height of 17 to 19 inches above the finished surface (matching standard wheelchair transfer heights), a seat depth of 16 to 18 inches , and a backrest recline angle of 95 to 105 degrees . Lumbar support should be positioned 6 to 9 inches above the seat surface.

Intermediate Armrests: Providing intermediate armrests divides the bench into distinct personal zones (proxemics), assists elderly and mobility-impaired individuals when standing up, and discourages skateboarding grinding and long-term horizontal reclining.

Mounting Methods:

Surface Mounting: Base plates anchored to a cured concrete pad using tamper-resistant stainless steel wedge anchors or epoxy anchors. Highly vulnerable to base corrosion if water ponds around anchor bolts.

Embedded / Direct Burial: Furnishing legs extend 12 to 24 inches below finished grade into cast-in-place concrete foundation piers. Maximum vandal resistance; the preferred method in high-impact public parks.

Freestanding / Weighted: Furniture relies on heavy mass (cast concrete or granite blocks) or wide stances. Allows seasonal reconfiguration but vulnerable to theft or displacement during severe storm events.

Materiality: Powder-coated or thermoplastic-dipped heavy-gauge carbon steel; Type 304 stainless steel for inland sites vs. Type 316 marine-grade stainless steel (with 2% molybdenum) within 5 miles of saltwater coastlines; sustainably harvested tropical hardwoods (FSC-certified Ipe, Cumaru, Teak) or high-density polyethylene (HDPE) recycled plastic lumber. BENCH ERGONOMIC PROFILE

  • [Backrest: 95° - 105° Recline]
  • \
  • \
  • \
  • Seat Depth: 16"-18" \
  • [====================] <--- Seat Height: 17" - 19"
  • | | (Matches ADA transfer)
  • | |
  • | Direct Burial Pier |
  • (======================) <--- Concrete Footing Below Grade
  • Bicycle Parking Guidelines (APBP Standards)

The Association of Pedestrian and Bicycle Professionals ( Bicycle Parking Guidelines ) classifies bike racks into short-term (Class II) and long-term (Class I) facilities:

Recommended Standard: The Inverted-U (Staple) Rack: The undisputed industry gold standard. It supports the bicycle upright at two distinct contact points along the frame, prevents the front wheel from pivoting and falling, and accommodates standard rigid U-locks locking both the frame and at least one wheel directly to the rack.

Unacceptable / Defective Racks: "Comb" or "Wheel-Bender" Racks: Racks that secure only one wheel without supporting the frame are strictly rejected by APBP and municipal codes. They allow bicycles to tip over, warp wheels under lateral loads, and fail to accommodate modern U-locks securing the frame.

Clearances: Minimum 36 inches spacing between parallel Inverted-U racks; minimum 48 inches clearance from adjacent walls, curbs, or trees to allow cyclists to maneuver without obstructing pedestrian paths.

Bollards: Functional Typologies & ASTM F2656 Crash Ratings

Fixed Architectural Bollards: Visual demarcations separating pedestrian plazas from vehicular lanes. Typically 36 to 42 inches in height, illuminated or non-illuminated.

Removable / Retractable Bollards: Installed in embedded ground sleeves flush with pavement to allow access for emergency vehicles (fire trucks), parade floats, or maintenance equipment. Secured with heavy padlocks or internal mechanical locking cams.

Hostile Vehicle Mitigation (HVM) & Crash-Rated Bollards: Designed to stop weaponized vehicular attacks against civic buildings, embassies, or crowded plazas. Governed by ASTM F2656 ( Standard Test Method for Crash Testing of Vehicle Security Barriers ):

Vehicle Type & Speed (M-Ratings): Evaluates a medium-duty truck (15,000 lbs / 6,800 kg) impacting at designated velocities:

M30: Tested at 30 mph (48 km/h).

M40: Tested at 40 mph (65 km/h).

M50: Tested at 50 mph (80 km/h).

Penetration Ratings (P-Ratings): Measures how far the vehicle's reference bed payload penetrates past the barrier reference line:

P1: Penetration less than or equal to 3.3 feet (1.0 meter) — the strictest security standard.

P2: Penetration between 3.31 and 23.0 feet (1.01 to 7.0 meters).

P3: Penetration between 23.1 and 98.4 feet (7.01 to 30.0 meters).

Structural installation requires a continuous reinforced concrete "grade beam" footing (often 3 to 4 feet deep and 4 to 6 feet wide) with rebar tying multiple bollards together to dissipate kinetic energy.

Tree Grates & ADA Compliance

Tree grates protect root ball soil from severe compaction in paved urban sidewalks while maintaining an unbroken pedestrian walking surface:

ADA Requirements (Section 302.3): Grate openings and slots must not exceed 1/2 inch (13 mm) in the dominant direction of pedestrian travel . If slots are elongated, they must be oriented strictly perpendicular to the dominant path of travel to prevent crutches, canes, high heels, and wheelchair casters from catching in the slots.

Tree Growth Accommodation: Grates must specify expandable, concentric knock-out rings that can be cut away incrementally as the tree trunk caliper expands over time, preventing girdling of the tree trunk.