Study guide
12.6 Reviewing Grading Design: Error Detection & Constructability
Landscape Architect Registration Examination L.A.R.E.
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Project Management, Legal Framework & Contracts
1.1 Professional Practice, Ethics & the HSW Mandate 1.2 Standard of Care, Responsible Charge & Sealing Documents 1.3 Professional Services Agreements & Contract Clauses 1.4 Fee Structures, Compensation Models & Billing 1.5 Project Scheduling, CPM & Budget Management 1.6 Risk Management, Professional Liability & Insurance
2 Chapter 2: Site Inventory, Surveying & Regulatory Framework
2.1 Boundary Surveys, Legal Descriptions & Survey Datums 2.2 Topographic Surveys, Easements & Encumbrances 2.3 Desktop Inventory, GIS Data & Field Reconnaissance 2.4 Policy Documents & Prior Planning Studies 2.5 Adjacent Land Use & Contextual Data Collection 2.6 Stakeholder Engagement & Public Participation 2.7 Zoning Frameworks, Dimensional Standards & FAR 2.8 Parking Standards, Buffer Yards & Zoning Relief 2.9 Clean Water Act Permitting & NEPA Review 2.10 ESA, Floodplain, Coastal & Historic Preservation Compliance
3 Chapter 3: Physical, Contextual & Environmental Site Analysis
3.1 Scoping Site Analysis & Synthesizing Opportunities and Constraints 3.2 Geotechnical Investigation & Soil Classification Systems 3.3 Problematic Soil Conditions & Agronomic Soil Quality 3.4 Topographic Interpretation & Slope Suitability 3.5 Watershed Mechanics, Stream Order & FEMA Flood Hazard Zones 3.6 Wetland Delineation, Classification & Riparian Buffers 3.7 Utility Analysis & Infrastructure Capacity 3.8 Visual Resource & Viewshed Analysis 3.9 Contextual Analysis: Appropriate Use & Future Development Impacts 3.10 Microclimates, Solar Orientation & Vegetation Analysis
4 Chapter 4: Stewardship, Climate Resiliency & Design Principles
4.1 SITES v2 & LEED Site Credit Rating Systems 4.2 Life-Cycle Assessment, Embodied Carbon & Ecosystem Services 4.3 Climate Resiliency, Adaptation & Urban Heat Island Mitigation 4.4 Environmental Justice & Social Equity in Site Design 4.5 Cultural Landscapes, Historic Preservation & Adaptive Reuse
5 Chapter 5: Master Planning, Programming & Land Use
5.1 Project Visioning, Goal Setting & Space Programming 5.2 Carrying Capacity Analysis & NRPA Park Classification Standards 5.3 Site Suitability Synthesis & Opportunities/Constraints Mapping 5.4 Land Use Allocation & Development Scenario Evaluation 5.5 Master Plan Deliverables & Design Guidelines 5.6 Capital Improvement Programming, Phasing & Implementation
6 Chapter 6: Schematic Design & Spatial Organization
6.1 Design Intent, Conceptual Diagrams & Form Generation 6.2 Basis of Design, Alternatives Evaluation & the Preferred Scheme 6.3 Spatial Hierarchy, Outdoor Rooms & Proportion 6.4 Pedestrian Circulation Networks & Environmental Wayfinding 6.5 ADA & PROWAG Accessible Route Design 6.6 Multimodal Transportation, Vehicular Circulation & Parking Layout
7 Chapter 7: Design Development, Materials & Planting Systems
7.1 Paving Systems: Rigid, Flexible & Unit Pavers 7.2 Retaining Walls, Earth Pressure & Wall Drainage 7.3 Wall System Selection, Fences, Screens & Gates 7.4 Site Furnishings: Selection, Materiality & Anchoring 7.5 Exterior Lighting, Photometrics, Dark Sky & Electrical Safety 7.6 Public Playground Safety: CPSC & ASTM Standards 7.7 Planting Design Principles & Ecological Matching 7.8 Water Conservation, Xeriscaping & Irrigation System Principles 7.9 Opinions of Probable Cost & Value Engineering
8 Chapter 8: Construction Drawings, Layout & Detailing
8.1 Drawing Set Hierarchy, Sheet Standards & Drafting Conventions 8.2 Interdisciplinary Coordination & QA/QC Review 8.3 Demolition Plans & Tree Protection Requirements 8.4 Site Preparation: Clearing, Grubbing, Topsoil & Utility Abandonment 8.5 Layout, Dimensioning & Materials Plans 8.6 Planting Plans, Plant Schedules & Installation Details 8.7 Technical Detailing: Pavements, Curbs & Joint Assemblies 8.8 Retaining Wall, Stair & Ramp Detailing Standards
9 Chapter 9: Construction Specifications & Bidding
9.1 CSI MasterFormat Divisions & SectionFormat Structure 9.2 Specification Writing Methods & the Drawings–Specifications Relationship 9.3 Project Manual, General Conditions & Front-End Documents 9.4 Bid Requirements, Bid Forms & Addenda Management 9.5 Pre-Bid Procedures, Bid Opening & Contractor Evaluation
10 Chapter 10: Construction Administration, Submittals & Changes
10.1 Pre-Construction Conference & Construction Administration Authority 10.2 Initial Decision Maker, Communication Protocols & Project Records 10.3 Submittals, Shop Drawings, Product Data & Samples 10.4 Requests for Information (RFIs) & Technical Clarifications 10.5 Change Orders, Construction Change Directives & Claims
11 Chapter 11: Field Observation, Quality Control & Close-Out
11.1 Field Observations, Site Reports & Non-Conforming Work 11.2 Quality Control, Material Testing & Inspections 11.3 Substantial Completion, Punch Lists & Retainage 11.4 Project Close-Out, Guarantees, Warranties & Final Acceptance
12 Chapter 12: Contour Interpretation, Grading & Earthwork Calculations
12.1 Contour Rules & Topographic Landform Interpretation 12.2 Spot Elevations & Contour Interpolation Calculations 12.3 Slope Formulas, Maximum Gradients & Cross Slopes 12.4 Earthwork Calculations: Average End Area & Grid Methods 12.5 Cut and Fill Balancing, Shrinkage, Swell & Mass Haul 12.6 Reviewing Grading Design: Error Detection & Constructability
13 Chapter 13: Stormwater Hydrology, Runoff & BMP Design
13.1 Hydrologic Cycle, Watershed Delineation & Time of Concentration 13.2 Peak Runoff Estimation: The Rational Method (Q = CiA) 13.3 NRCS Curve Number Method & Runoff Hydrographs 13.4 LID Principles, Water Quality Volume & Bioretention Design 13.5 Bioswales, Permeable Pavement, Green Roofs & Harvesting
14 Chapter 14: Site Drainage Systems, Hydraulics & Erosion Control
14.1 Open Channel Hydraulics, Manning’s Equation & Swale Design 14.2 Gutter Flow, Spread & Roadway Inlet Hydraulics 14.3 Subsurface Drainage, Catch Basins & Pipe Invert Calculations 14.4 Stormwater Storage: Detention, Retention & Water Quality Basins 14.5 Reviewing Drainage Plans & Evaluating Design Alternatives 14.6 Erosion Mechanics, RUSLE & the NPDES/SWPPP Framework 14.7 Erosion & Sediment Control BMPs, Basins & Site Stabilization
12.6 Reviewing Grading Design: Error Detection & Constructability
Key Takeaways Explain This Topic AI
Grading review proceeds in a fixed sequence — datum and benchmark, contour integrity, drainage continuity, slope compliance, accessibility, tie-in, and earthwork balance — because errors found late are errors already propagated.
A contour that crosses, splits, or ends within the drawing interior is a drafting error, and an unlabeled contour interval change is the single most common source of downstream elevation mistakes.
Every low point must have a designed outlet; an enclosed contour with no inlet, no overflow, and no positive outfall is a designed pond and is the most frequent defect on a grading plan.
Positive drainage minimums are approximately 1% on pavement and 2% on turf, while accessible routes cap running slope at 5.00% and cross slope at 2.08%, so a compliant accessible route occupies a narrow band between ponding and non-compliance.
Proposed contours must tie to existing contours at the limit of work at the same elevation, and a mismatch at the tie-in means the grading does not close.
Last updated: September 2026
1. The Task the Exam Tests Directly
Review Grading Design (e.g., review grading alternatives, evaluate for inconsistencies) is an enumerated task within Grading and Earthwork , which carries 44% of the Grading, Drainage and Stormwater Management section — the heaviest single content area on that exam section. It is also the task best matched to CLARB's advanced item types: a hot spot item that asks you to click the location of the error on a grading plan is literally a grading review exercise.
Reviewing is a different cognitive act from designing. Designing asks "what should this be?" Reviewing asks "what here cannot be true?"
2. The Seven-Step Review Sequence
Errors found late have already propagated, so review follows a fixed order.
Step 1 — Datum, benchmark, and contour interval
Is a benchmark cited with description, elevation, and datum (NAVD88 or NGVD29)?
Is the contour interval stated, and is it constant across the sheet?
Do existing and proposed contours use distinguishable line types (existing dashed and lighter, proposed solid and heavier)?
A contour interval that changes between sheets without an explicit note is the most common source of downstream elevation errors , because a reader interpolating at the wrong interval produces spot elevations that are silently wrong.
Step 2 — Contour integrity
Check each proposed contour against the rules that cannot be violated:
- Rule Violation signature
- Contours never cross Two contours intersecting (only valid at a vertical face such as a wall)
- Contours never split or branch A single contour forking into two
- Contours close on themselves or run off the sheet A contour that simply stops mid-drawing
Contours never repeat an elevation adjacently except at a summit or depression Two adjacent lines labeled the same without a summit or hachured depression
- Contour spacing reflects slope Abrupt spacing change with no corresponding wall, curb, or slope break
- Step 3 — Drainage continuity
Trace every drop of water from every high point to a designed outlet. The essential question at each low point: where does the water go when this fills?
A closed contour with no inlet, no overflow weir, and no positive outfall is a designed pond. This is the most frequent defect on a student and professional grading plan alike, and it is what a hot spot item most often targets.
Also verify:
- Inlets are placed at low points, not near them
- Swales carry a continuous downhill gradient with no reverse grade
- Ridge lines between catchments actually separate flow
- Runoff is not directed onto adjacent property or onto a building
- Step 4 — Slope compliance
- Condition Typical standard
- Minimum pavement slope ~1.0% (0.5% achievable only on well-controlled concrete)
- Minimum turf / planted slope ~2.0%
- Maximum mowable turf slope 3:1 (33%), with 4:1 preferred
- Maximum planted slope without stabilization 2:1 (50%)
- Maximum accessible route running slope 5.00% (1:20)
- Maximum ramp running slope 8.33% (1:12)
- Maximum cross slope on accessible route 2.08% (1:48)
- Maximum slope in any direction on a landing 2.08% (1:48)
- Step 5 — Accessibility verification
This is where grading review most often fails, because the compliant band is narrow. An accessible walk must drain (at least about 1%) and must not exceed 5.00% running slope and 2.08% cross slope. Verify the actual computed slope between the given spot elevations rather than trusting the label.
Checks:
- Compute running slope between consecutive spot elevations along the route
- Compute cross slope perpendicular to the direction of travel
- Confirm ramp runs do not exceed 30 inches of rise between landings
- Confirm landings are at least 60 inches long and level within 2.08% in all directions
- Confirm accessible parking stalls and access aisles do not exceed 2.08% in any direction
Confirm the accessible route connects the accessible parking, the site arrival point, and the entrance without a step
Step 6 — Tie-in at the limit of work
Proposed contours must meet existing contours at the same elevation at the limit of disturbance. A proposed 104 contour that ends adjacent to an existing 106 contour at the property line means the grading does not close and a retaining structure or additional grading is required but not shown.
Also verify grades at fixed points that cannot move: existing building finished floors, existing tree root collars, adjacent sidewalks, curb returns, manhole rims, and property lines.
Step 7 — Earthwork balance and constructability
Does the plan produce a gross cut/fill imbalance that requires import or export?
Has topsoil stripping and respreading been accounted for separately?
Is there equipment access to every graded area?
Do cut slopes daylight within the property, or do they run off site?
Are grades achievable with the specified equipment, or does the plan require hand grading in inaccessible areas?
3. Error Signatures Worth Memorizing
- What you see What it means
- Closed contour, no inlet, no overflow Water trapped; designed pond
- Contour crossing itself or another Drafting error or undocumented vertical face
- Proposed contour ending mid-sheet Incomplete grading; does not close
- Adjacent same-value contours with no hachures Ambiguous summit or depression
Spot elevation inconsistent with surrounding contours Spot governs, so the contours are wrong (or the spot is a typo)
- Walk with 2.5% cross slope Exceeds 2.08%; not compliant
- Walk with 0.0% or reverse cross slope Ponds and ices; fails positive drainage
- Ramp run longer than 30 ft at 8.33% Exceeds 30 in rise between landings
- Swale with a flat reach Standing water and mosquito habitat
- Turf slope at 2:1 Not mowable; exceeds 3:1 maximum
- Proposed grade above an existing tree root collar Root suffocation; tree loss
- Runoff directed toward a building or off site Liability and likely code violation
- 4. Comparing Grading Alternatives
Where the task is to evaluate two or more grading schemes rather than to find an error, compare on a fixed set:
Earthwork balance — which scheme minimizes import and export?
Tree and resource preservation — which scheme keeps grade changes outside critical root zones?
Accessibility — which scheme achieves the accessible route with the fewest ramps and landings?
Drainage — which scheme produces the shortest, simplest conveyance with fewest structures?
Wall quantity — retaining walls are the most expensive way to resolve a grade change; the scheme with fewer wall feet usually wins
Constructability and phasing — which scheme can be built in stages with usable access?
5. Exam Traps & Pitfalls
Trusting the slope label. Compute the slope from the spot elevations; the label may be stale.
Missing the trapped low point. Every low point needs an inlet and an overflow.
Checking running slope and forgetting cross slope. Cross slope at 2.08% fails more accessible routes than running slope does.
Ignoring the tie-in. Proposed must meet existing at the same elevation at the limit of work.
Accepting a flat walk as compliant. Zero slope satisfies accessibility and fails drainage; the walk must do both.
Overlooking existing fixed elevations. Finished floors, curb returns, and root collars cannot move to suit the plan.