Study guide

13.3 NRCS Curve Number Method & Runoff Hydrographs

Landscape Architect Registration Examination L.A.R.E.

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Project Management, Legal Framework & Contracts

1.1 Professional Practice, Ethics & the HSW Mandate 1.2 Standard of Care, Responsible Charge & Sealing Documents 1.3 Professional Services Agreements & Contract Clauses 1.4 Fee Structures, Compensation Models & Billing 1.5 Project Scheduling, CPM & Budget Management 1.6 Risk Management, Professional Liability & Insurance

2 Chapter 2: Site Inventory, Surveying & Regulatory Framework

2.1 Boundary Surveys, Legal Descriptions & Survey Datums 2.2 Topographic Surveys, Easements & Encumbrances 2.3 Desktop Inventory, GIS Data & Field Reconnaissance 2.4 Policy Documents & Prior Planning Studies 2.5 Adjacent Land Use & Contextual Data Collection 2.6 Stakeholder Engagement & Public Participation 2.7 Zoning Frameworks, Dimensional Standards & FAR 2.8 Parking Standards, Buffer Yards & Zoning Relief 2.9 Clean Water Act Permitting & NEPA Review 2.10 ESA, Floodplain, Coastal & Historic Preservation Compliance

3 Chapter 3: Physical, Contextual & Environmental Site Analysis

3.1 Scoping Site Analysis & Synthesizing Opportunities and Constraints 3.2 Geotechnical Investigation & Soil Classification Systems 3.3 Problematic Soil Conditions & Agronomic Soil Quality 3.4 Topographic Interpretation & Slope Suitability 3.5 Watershed Mechanics, Stream Order & FEMA Flood Hazard Zones 3.6 Wetland Delineation, Classification & Riparian Buffers 3.7 Utility Analysis & Infrastructure Capacity 3.8 Visual Resource & Viewshed Analysis 3.9 Contextual Analysis: Appropriate Use & Future Development Impacts 3.10 Microclimates, Solar Orientation & Vegetation Analysis

4 Chapter 4: Stewardship, Climate Resiliency & Design Principles

4.1 SITES v2 & LEED Site Credit Rating Systems 4.2 Life-Cycle Assessment, Embodied Carbon & Ecosystem Services 4.3 Climate Resiliency, Adaptation & Urban Heat Island Mitigation 4.4 Environmental Justice & Social Equity in Site Design 4.5 Cultural Landscapes, Historic Preservation & Adaptive Reuse

5 Chapter 5: Master Planning, Programming & Land Use

5.1 Project Visioning, Goal Setting & Space Programming 5.2 Carrying Capacity Analysis & NRPA Park Classification Standards 5.3 Site Suitability Synthesis & Opportunities/Constraints Mapping 5.4 Land Use Allocation & Development Scenario Evaluation 5.5 Master Plan Deliverables & Design Guidelines 5.6 Capital Improvement Programming, Phasing & Implementation

6 Chapter 6: Schematic Design & Spatial Organization

6.1 Design Intent, Conceptual Diagrams & Form Generation 6.2 Basis of Design, Alternatives Evaluation & the Preferred Scheme 6.3 Spatial Hierarchy, Outdoor Rooms & Proportion 6.4 Pedestrian Circulation Networks & Environmental Wayfinding 6.5 ADA & PROWAG Accessible Route Design 6.6 Multimodal Transportation, Vehicular Circulation & Parking Layout

7 Chapter 7: Design Development, Materials & Planting Systems

7.1 Paving Systems: Rigid, Flexible & Unit Pavers 7.2 Retaining Walls, Earth Pressure & Wall Drainage 7.3 Wall System Selection, Fences, Screens & Gates 7.4 Site Furnishings: Selection, Materiality & Anchoring 7.5 Exterior Lighting, Photometrics, Dark Sky & Electrical Safety 7.6 Public Playground Safety: CPSC & ASTM Standards 7.7 Planting Design Principles & Ecological Matching 7.8 Water Conservation, Xeriscaping & Irrigation System Principles 7.9 Opinions of Probable Cost & Value Engineering

8 Chapter 8: Construction Drawings, Layout & Detailing

8.1 Drawing Set Hierarchy, Sheet Standards & Drafting Conventions 8.2 Interdisciplinary Coordination & QA/QC Review 8.3 Demolition Plans & Tree Protection Requirements 8.4 Site Preparation: Clearing, Grubbing, Topsoil & Utility Abandonment 8.5 Layout, Dimensioning & Materials Plans 8.6 Planting Plans, Plant Schedules & Installation Details 8.7 Technical Detailing: Pavements, Curbs & Joint Assemblies 8.8 Retaining Wall, Stair & Ramp Detailing Standards

9 Chapter 9: Construction Specifications & Bidding

9.1 CSI MasterFormat Divisions & SectionFormat Structure 9.2 Specification Writing Methods & the Drawings–Specifications Relationship 9.3 Project Manual, General Conditions & Front-End Documents 9.4 Bid Requirements, Bid Forms & Addenda Management 9.5 Pre-Bid Procedures, Bid Opening & Contractor Evaluation

10 Chapter 10: Construction Administration, Submittals & Changes

10.1 Pre-Construction Conference & Construction Administration Authority 10.2 Initial Decision Maker, Communication Protocols & Project Records 10.3 Submittals, Shop Drawings, Product Data & Samples 10.4 Requests for Information (RFIs) & Technical Clarifications 10.5 Change Orders, Construction Change Directives & Claims

11 Chapter 11: Field Observation, Quality Control & Close-Out

11.1 Field Observations, Site Reports & Non-Conforming Work 11.2 Quality Control, Material Testing & Inspections 11.3 Substantial Completion, Punch Lists & Retainage 11.4 Project Close-Out, Guarantees, Warranties & Final Acceptance

12 Chapter 12: Contour Interpretation, Grading & Earthwork Calculations

12.1 Contour Rules & Topographic Landform Interpretation 12.2 Spot Elevations & Contour Interpolation Calculations 12.3 Slope Formulas, Maximum Gradients & Cross Slopes 12.4 Earthwork Calculations: Average End Area & Grid Methods 12.5 Cut and Fill Balancing, Shrinkage, Swell & Mass Haul 12.6 Reviewing Grading Design: Error Detection & Constructability

13 Chapter 13: Stormwater Hydrology, Runoff & BMP Design

13.1 Hydrologic Cycle, Watershed Delineation & Time of Concentration 13.2 Peak Runoff Estimation: The Rational Method (Q = CiA) 13.3 NRCS Curve Number Method & Runoff Hydrographs 13.4 LID Principles, Water Quality Volume & Bioretention Design 13.5 Bioswales, Permeable Pavement, Green Roofs & Harvesting

14 Chapter 14: Site Drainage Systems, Hydraulics & Erosion Control

14.1 Open Channel Hydraulics, Manning’s Equation & Swale Design 14.2 Gutter Flow, Spread & Roadway Inlet Hydraulics 14.3 Subsurface Drainage, Catch Basins & Pipe Invert Calculations 14.4 Stormwater Storage: Detention, Retention & Water Quality Basins 14.5 Reviewing Drainage Plans & Evaluating Design Alternatives 14.6 Erosion Mechanics, RUSLE & the NPDES/SWPPP Framework 14.7 Erosion & Sediment Control BMPs, Basins & Site Stabilization

13.3 NRCS Curve Number Method & Runoff Hydrographs

Key Takeaways Explain This Topic AI

The NRCS (formerly SCS) Curve Number method (TR-55 / NEH-4) calculates total runoff depth (Q in inches) and generates runoff hydrographs for both small and large, complex watersheds using the foundational equation Q = (P - Ia)^2 / ((P - Ia) + S), where Ia = 0.2S.

Hydrologic Soil Groups (HSGs) categorize soils into four infiltration classes: Group A (deep sands/gravels, infiltration > 0.30 in/hr, lowest runoff), Group B (silt loam/loam, infiltration 0.15-0.30 in/hr), Group C (sandy clay loam, infiltration 0.05-0.15 in/hr), and Group D (clays, shallow bedrock, high water table, infiltration < 0.05 in/hr, highest runoff).

Antecedent Moisture Condition (AMC) adjusts Curve Numbers based on 5-day prior rainfall, with standard published NRCS tables reflecting average moisture (AMC II), while dry soils require AMC I and saturated soils require AMC III.

Potential maximum soil retention after runoff begins (S, in inches) is derived from the Curve Number via S = (1000 / CN) - 10, meaning higher CN values yield smaller retention capacities and greater runoff volumes.

A runoff hydrograph plots discharge (cfs) over time, characterized by an inflow hydrograph, peak discharge (qp), time to peak (Tp), and recession limb; detention basin routing exploits the difference between inflow and outflow hydrographs to size required storage volume (Vs).

Last updated: September 2026

Core Focus: When stormwater projects involve detention storage, large watersheds, or detailed volume modeling, landscape architects rely on the USDA Natural Resources Conservation Service (NRCS, formerly SCS) Curve Number method. This section covers Hydrologic Soil Groups (HSGs), Curve Number selection, runoff volume calculations (Q), and synthetic hydrograph routing tested on LARE Section 4.

1. Foundations & Scope of the NRCS Methodology

Originally codified in the NRCS National Engineering Handbook, Section 4 (NEH-4) and popularized through Technical Release 55 (TR-55) , the Runoff Curve Number method overcomes the major limitations of the Rational Method:

Full Storm Volume: Calculates total surface runoff depth (Q, in inches) and total volumetric yield (cubic feet or acre-feet), rather than just an instantaneous peak rate.

Temporal Rainfall Distribution: Couples rainfall depth with standardized 24-hour synthetic rainfall distributions (NRCS Type I, IA, II, and III) that model realistic storm progression (incorporating intense cloudbursts within prolonged precipitation).

Hydrograph Generation: Produces time-discharge hydrographs that can be routed through detention basins, culverts, reservoirs, and natural streams.

Scalable Across Watershed Sizes: Valid for small site plans (< 1 acre) up to complex regional river basins covering hundreds of square miles.

2. Hydrologic Soil Groups (HSGs): The Four Soil Classes

The NRCS classifies over 14,000 soil series across the United States into four Hydrologic Soil Groups (HSG A, B, C, and D) based on their minimum infiltration rate after prolonged wetting and without vegetative cover: +-------------------------------------------------------------------------+

  • | NRCS HYDROLOGIC SOIL GROUPS (HSG) SPECTRUM |
  • +-------------------------------------------------------------------------+
  • | GROUP A: Sand, Loamy Sand, Gravel --> Infiltration: > 0.30 in/hr |
  • | Deep, well-drained Runoff Potential: LOWEST |
  • | GROUP B: Silt Loam, Loam --> Infiltration: 0.15 - 0.30 in/hr|
  • | Moderately deep, well-drained Runoff Potential: MODERATE |
  • | GROUP C: Sandy Clay Loam, Clay Loam --> Infiltration: 0.05 - 0.15 in/hr|
  • | Impending layer, fine texture Runoff Potential: MOD-HIGH |
  • | GROUP D: Heavy Clay, High Water Table --> Infiltration: < 0.05 in/hr |
  • | Shallow bedrock, claypans Runoff Potential: HIGHEST |
  • +-------------------------------------------------------------------------+
  • Dual Hydrologic Soil Groups (A/D, B/D, C/D)

Certain wet soils are designated with dual classifications (e.g., B/D or C/D):

The first letter applies only if the soil is artificially drained via engineered agricultural tiles, subdrain networks, or ditch systems.

The second letter (D) applies to natural, undrained conditions where a high water table severely impedes infiltration.

  • 3. Antecedent Moisture Conditions (AMC) & Hydrologic Condition
  • Antecedent Moisture Condition (AMC)

The Antecedent Moisture Condition (AMC) accounts for the soil's moisture content prior to the design storm, based on total rainfall in the preceding 5 days:

AMC I (Dry): Soils are dry but not to the permanent wilting point; prior 5-day rainfall is < 0.5 inch (dormant season) or < 1.4 inches (growing season). Produces lower Curve Numbers and reduced runoff.

AMC II (Average / Normal): Typical regional soil moisture conditions. All standard published NRCS Curve Number tables reflect AMC II .

AMC III (Wet / Saturated): Heavy rain or saturated ground in the prior 5 days (> 1.1 inches dormant, > 2.1 inches growing). Curve Numbers increase toward 95 to 98, generating massive runoff.

Vegetative Hydrologic Condition

Within a given land use, the density of ground cover dictates the "hydrologic condition":

Poor: < 50% ground cover; heavily grazed or compacted; high runoff.

Fair: 50% to 75% ground cover; moderately grazed or thinned turf.

Good: > 75% ground cover; healthy, undisturbed forest litter or dense turf grass.

Standard NRCS Curve Numbers (CN) for AMC II

  • Cover Type & Hydrologic Condition HSG A HSG B HSG C HSG D
  • Fully Impervious (roofs, asphalt, concrete) 98 98 98 98
  • Gravel Roads & Parking Areas 76 85 89 91
  • Urban Open Space / Lawn (Good, > 75% cover) 39 61 74 80
  • Urban Open Space / Lawn (Fair, 50-75% cover) 49 69 79 84
  • Urban Open Space / Lawn (Poor, < 50% cover) 68 79 86 89
  • Meadow (continuous grass, un-mowed) 30 58 71 78
  • Woods / Forest (Good cover & forest litter) 30 55 70 77
  • Woods / Forest (Poor, thinned/grazed) 45 66 77 83
  • Agricultural Row Crops (Straight row, Good) 67 78 85 89
  • Area-Weighted Composite Curve Number (CN_comp)
  • CN_comp = sum(CN_k * A_k) / A_total
  • 4. The NRCS Runoff Equations & Mathematical Mechanics

The fundamental NRCS equation calculates cumulative surface runoff depth (Q, in inches) resulting from a total 24-hour design storm precipitation depth (P, in inches):

1. Potential Maximum Retention (S)

The parameter S represents the total depth of water (in inches) that the ground can store through infiltration, depression storage, and vegetative interception after runoff begins:

S = (1000 / CN) - 10

Notice the inverse relationship: as CN approaches 100 (completely impervious), S approaches 0.0 inches (zero retention). As CN decreases, S increases exponentially.

2. Initial Abstraction (Ia)

The initial abstraction (Ia) comprises all water losses occurring before surface runoff starts—including interception by leaves, micro-depression filling, evaporation, and early infiltration. In standard TR-55 methodology, Ia is related empirically to retention:

  • Ia = 0.2 * S
  • 3. Cumulative Runoff Depth (Q)

The core NRCS runoff equation is expressed as:

  • Q = (P - Ia)^2 / [(P - Ia) + S] = (P - 0.2 S)^2 / (P + 0.8 S) for P > Ia
  • If P <= Ia, then Q = 0.00 inches

Where:

  • Q = Direct surface runoff depth (inches over the watershed)
  • P = Total 24-hour design rainfall depth (inches)
  • S = Potential maximum retention (inches)
  • Ia = Initial abstraction (inches)
  • 4. Total Volumetric Yield (V)

To convert runoff depth (Q, in inches) into cubic feet of water:

  • V = Q * (1/12 ft) * A (acres) * 43,560 sq ft/ac = 3,630 * Q * A (cubic feet)
  • 5. Runoff Hydrographs & Routing Mechanics

A hydrograph is a graphical representation of the discharge rate (Q, in cfs) plotted against time (t, in hours or minutes) at a specific outfall. +-------------------------------------------------------------------------+

  • | DISCHARGE HYDROGRAPH & DETENTION ROUTING |
  • +-------------------------------------------------------------------------+
  • | Flow (cfs) |
  • | | |
  • | qp2| .---. <-- Post-Development Inflow (Peak = qp2) |
  • | | / / |
  • | | / Vs / <-- REQUIRED DETENTION STORAGE (Vs) |
  • | qp1| /| .-. / (Volume between inflow & outflow) |
  • | | Pre-Dev / | / / / |
  • | | Hydrograph / |/ / / <-- Controlled Basin Outflow |
  • | | / | / / (Peak attenuated to qp1) |
  • | 0 +-----------*----+--------*---*--------------------> Time (hours) |
  • | Start Tp2 Tp1 Base (Tb) |
  • +-------------------------------------------------------------------------+
  • Essential Anatomy of a Hydrograph

Rising Limb (Concentration Curve): The ascending portion of the curve reflecting runoff from increasingly distant portions of the basin.

Peak Discharge (qp): The maximum instantaneous discharge rate exiting the watershed.

Time to Peak (Tp): The time elapsed from the beginning of effective precipitation to the peak discharge rate.

Recession Limb (Falling Limb): The descending portion of the curve representing the withdrawal of water from surface and channel storage after rainfall ceases.

Time of Base (Tb): The total duration of surface runoff flow.

The NRCS Dimensionless Unit Hydrograph

The NRCS unit hydrograph models peak discharge (qp) as a function of drainage area (A), runoff depth (Q), and time to peak (Tp):

qp = (484 * A * Q) / Tp

Where:

qp = Peak discharge (cfs)

484 = Standard peak shape factor for rolling terrain (drops to 300 in flat coastal plains; rises to 600 in steep mountainous terrain)

  • A = Drainage area (square miles)
  • Q = Runoff depth (inches)
  • Tp = Time to peak (hours), where Tp = (delta_D / 2) + 0.6 * Tc
  • Detention Basin Flood Routing (Peak Attenuation)

When urbanization increases peak discharge from qp1 to qp2 and shortens Tp, a stormwater detention basin temporarily stores the excess runoff volume. The required active storage volume (Vs) is the mathematical integral of the difference between inflow and outflow hydrographs:

Vs = integral(Qinflow - Qoutflow) dt

By releasing water slowly through a staged orifice and weir structure, the basin attenuates (shaves) the peak discharge back down to pre-development levels (qp1) and delays the timing of release.

6. Comprehensive Comparison: Hydrologic Soil Groups

  • Soil Group Soil Textures Minimum Infiltration Rate Runoff Potential Water Table Depth Depth to Bedrock
  • HSG A Sand, loamy sand, gravel > 0.30 in/hr (> 5.8 microns/s) Very Low Deep (> 6.0 ft) Deep (> 6.0 ft)

HSG B Silt loam, loam, fine sandy loam 0.15 - 0.30 in/hr Moderate Moderately Deep (4.0 - 6.0 ft) Moderately Deep

HSG C Sandy clay loam, clay loam 0.05 - 0.15 in/hr Moderately High Shallow (2.0 - 4.0 ft) Moderately Shallow

HSG D Clay, silty clay, sandy clay < 0.05 in/hr (< 1.0 microns/s) Very High Very Shallow (0.0 - 2.0 ft) Shallow (< 2.0 ft)

7. Real-World Case Scenario: Post-Development Runoff & Storage Sizing

Scenario: A 10.0-acre site is being converted from an undisturbed meadow on Hydrologic Soil Group B into a mixed-use residential village. The 24-hour, 10-year design storm precipitation is P = 4.50 inches.

Pre-Development:

  • 10.0 acres of meadow in good condition (CN = 58)
  • Potential retention: S_pre = (1000 / 58) - 10 = 17.24 - 10 = 7.24 inches
  • Initial abstraction: Ia_pre = 0.2 * 7.24 = 1.45 inches
  • Runoff check: P = 4.50" > Ia = 1.45" (runoff occurs)

Runoff depth:

Q_pre = (4.50 - 1.45)^2 / [4.50 + (0.8 * 7.24)] = (3.05)^2 / [4.50 + 5.79] = 9.30 / 10.29 = 0.90 inches

Pre-development volume:

V_pre = 3,630 * 0.90 in * 10.0 ac = 32,670 cu ft

Post-Development:

  • 4.0 acres impervious surfaces (roofs/streets, CN = 98)
  • 6.0 acres managed lawn in good condition on HSG B (CN = 61)

Composite Curve Number:

  • CN_post = [(4.0 * 98) + (6.0 * 61)] / 10.0 = [392 + 366] / 10.0 = 758 / 10.0 = 75.8 ~= 76
  • Potential retention: S_post = (1000 / 76) - 10 = 13.16 - 10 = 3.16 inches
  • Initial abstraction: Ia_post = 0.2 * 3.16 = 0.63 inches
  • Runoff check: P = 4.50" > Ia = 0.63" (runoff occurs)

Runoff depth:

Q_post = (4.50 - 0.63)^2 / [4.50 + (0.8 * 3.16)] = (3.87)^2 / [4.50 + 2.53] = 14.98 / 7.03 = 2.13 inches

Post-development volume:

V_post = 3,630 * 2.13 in * 10.0 ac = 77,319 cu ft

Storage Volume Differential: delta_V = V_post - V_pre = 77,319 cu ft - 32,670 cu ft = 44,649 cu ft ~= 1.025 acre-feet The site generates an additional 44,649 cubic feet (over 334,000 gallons) of stormwater runoff during a single 10-year storm event. This excess volume forms the baseline sizing parameter for the site's detention basin.

8. Exam Traps & Pitfalls

The P <= Ia Zero-Runoff Check: Always check whether total precipitation (P) exceeds initial abstraction (Ia = 0.2S) before performing runoff depth calculations. If P <= 0.2S, surface runoff is zero . Entering P < Ia into the numerator will square a negative number, producing an erroneous positive runoff value!

Confusing Runoff Depth (Q) with Peak Flow Rate (qp): In the NRCS equation, Q is measured in inches of water depth across the watershed. Peak discharge rate is denoted as qp and measured in cubic feet per second (cfs) .

Soil Group Inversion (HSG A vs. D): Never invert soil groups: Group A produces the LEAST runoff (highest infiltration), while Group D produces the MOST runoff (lowest infiltration).

The Curve Number 100 Fallacy: A Curve Number of 100 does not mean zero runoff; it represents a 100% impervious water surface where S = 0.0, Ia = 0.0, and Q = P (every single drop of precipitation becomes runoff).

Unweighted CN Values: When combining multiple land uses, never take a simple arithmetic average of Curve Numbers. You must compute an area-weighted composite based on surveyed acreage.