Study guide

14.6 Erosion Mechanics, RUSLE & the NPDES/SWPPP Framework

Landscape Architect Registration Examination L.A.R.E.

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Project Management, Legal Framework & Contracts

1.1 Professional Practice, Ethics & the HSW Mandate 1.2 Standard of Care, Responsible Charge & Sealing Documents 1.3 Professional Services Agreements & Contract Clauses 1.4 Fee Structures, Compensation Models & Billing 1.5 Project Scheduling, CPM & Budget Management 1.6 Risk Management, Professional Liability & Insurance

2 Chapter 2: Site Inventory, Surveying & Regulatory Framework

2.1 Boundary Surveys, Legal Descriptions & Survey Datums 2.2 Topographic Surveys, Easements & Encumbrances 2.3 Desktop Inventory, GIS Data & Field Reconnaissance 2.4 Policy Documents & Prior Planning Studies 2.5 Adjacent Land Use & Contextual Data Collection 2.6 Stakeholder Engagement & Public Participation 2.7 Zoning Frameworks, Dimensional Standards & FAR 2.8 Parking Standards, Buffer Yards & Zoning Relief 2.9 Clean Water Act Permitting & NEPA Review 2.10 ESA, Floodplain, Coastal & Historic Preservation Compliance

3 Chapter 3: Physical, Contextual & Environmental Site Analysis

3.1 Scoping Site Analysis & Synthesizing Opportunities and Constraints 3.2 Geotechnical Investigation & Soil Classification Systems 3.3 Problematic Soil Conditions & Agronomic Soil Quality 3.4 Topographic Interpretation & Slope Suitability 3.5 Watershed Mechanics, Stream Order & FEMA Flood Hazard Zones 3.6 Wetland Delineation, Classification & Riparian Buffers 3.7 Utility Analysis & Infrastructure Capacity 3.8 Visual Resource & Viewshed Analysis 3.9 Contextual Analysis: Appropriate Use & Future Development Impacts 3.10 Microclimates, Solar Orientation & Vegetation Analysis

4 Chapter 4: Stewardship, Climate Resiliency & Design Principles

4.1 SITES v2 & LEED Site Credit Rating Systems 4.2 Life-Cycle Assessment, Embodied Carbon & Ecosystem Services 4.3 Climate Resiliency, Adaptation & Urban Heat Island Mitigation 4.4 Environmental Justice & Social Equity in Site Design 4.5 Cultural Landscapes, Historic Preservation & Adaptive Reuse

5 Chapter 5: Master Planning, Programming & Land Use

5.1 Project Visioning, Goal Setting & Space Programming 5.2 Carrying Capacity Analysis & NRPA Park Classification Standards 5.3 Site Suitability Synthesis & Opportunities/Constraints Mapping 5.4 Land Use Allocation & Development Scenario Evaluation 5.5 Master Plan Deliverables & Design Guidelines 5.6 Capital Improvement Programming, Phasing & Implementation

6 Chapter 6: Schematic Design & Spatial Organization

6.1 Design Intent, Conceptual Diagrams & Form Generation 6.2 Basis of Design, Alternatives Evaluation & the Preferred Scheme 6.3 Spatial Hierarchy, Outdoor Rooms & Proportion 6.4 Pedestrian Circulation Networks & Environmental Wayfinding 6.5 ADA & PROWAG Accessible Route Design 6.6 Multimodal Transportation, Vehicular Circulation & Parking Layout

7 Chapter 7: Design Development, Materials & Planting Systems

7.1 Paving Systems: Rigid, Flexible & Unit Pavers 7.2 Retaining Walls, Earth Pressure & Wall Drainage 7.3 Wall System Selection, Fences, Screens & Gates 7.4 Site Furnishings: Selection, Materiality & Anchoring 7.5 Exterior Lighting, Photometrics, Dark Sky & Electrical Safety 7.6 Public Playground Safety: CPSC & ASTM Standards 7.7 Planting Design Principles & Ecological Matching 7.8 Water Conservation, Xeriscaping & Irrigation System Principles 7.9 Opinions of Probable Cost & Value Engineering

8 Chapter 8: Construction Drawings, Layout & Detailing

8.1 Drawing Set Hierarchy, Sheet Standards & Drafting Conventions 8.2 Interdisciplinary Coordination & QA/QC Review 8.3 Demolition Plans & Tree Protection Requirements 8.4 Site Preparation: Clearing, Grubbing, Topsoil & Utility Abandonment 8.5 Layout, Dimensioning & Materials Plans 8.6 Planting Plans, Plant Schedules & Installation Details 8.7 Technical Detailing: Pavements, Curbs & Joint Assemblies 8.8 Retaining Wall, Stair & Ramp Detailing Standards

9 Chapter 9: Construction Specifications & Bidding

9.1 CSI MasterFormat Divisions & SectionFormat Structure 9.2 Specification Writing Methods & the Drawings–Specifications Relationship 9.3 Project Manual, General Conditions & Front-End Documents 9.4 Bid Requirements, Bid Forms & Addenda Management 9.5 Pre-Bid Procedures, Bid Opening & Contractor Evaluation

10 Chapter 10: Construction Administration, Submittals & Changes

10.1 Pre-Construction Conference & Construction Administration Authority 10.2 Initial Decision Maker, Communication Protocols & Project Records 10.3 Submittals, Shop Drawings, Product Data & Samples 10.4 Requests for Information (RFIs) & Technical Clarifications 10.5 Change Orders, Construction Change Directives & Claims

11 Chapter 11: Field Observation, Quality Control & Close-Out

11.1 Field Observations, Site Reports & Non-Conforming Work 11.2 Quality Control, Material Testing & Inspections 11.3 Substantial Completion, Punch Lists & Retainage 11.4 Project Close-Out, Guarantees, Warranties & Final Acceptance

12 Chapter 12: Contour Interpretation, Grading & Earthwork Calculations

12.1 Contour Rules & Topographic Landform Interpretation 12.2 Spot Elevations & Contour Interpolation Calculations 12.3 Slope Formulas, Maximum Gradients & Cross Slopes 12.4 Earthwork Calculations: Average End Area & Grid Methods 12.5 Cut and Fill Balancing, Shrinkage, Swell & Mass Haul 12.6 Reviewing Grading Design: Error Detection & Constructability

13 Chapter 13: Stormwater Hydrology, Runoff & BMP Design

13.1 Hydrologic Cycle, Watershed Delineation & Time of Concentration 13.2 Peak Runoff Estimation: The Rational Method (Q = CiA) 13.3 NRCS Curve Number Method & Runoff Hydrographs 13.4 LID Principles, Water Quality Volume & Bioretention Design 13.5 Bioswales, Permeable Pavement, Green Roofs & Harvesting

14 Chapter 14: Site Drainage Systems, Hydraulics & Erosion Control

14.1 Open Channel Hydraulics, Manning’s Equation & Swale Design 14.2 Gutter Flow, Spread & Roadway Inlet Hydraulics 14.3 Subsurface Drainage, Catch Basins & Pipe Invert Calculations 14.4 Stormwater Storage: Detention, Retention & Water Quality Basins 14.5 Reviewing Drainage Plans & Evaluating Design Alternatives 14.6 Erosion Mechanics, RUSLE & the NPDES/SWPPP Framework 14.7 Erosion & Sediment Control BMPs, Basins & Site Stabilization

14.6 Erosion Mechanics, RUSLE & the NPDES/SWPPP Framework

Key Takeaways Explain This Topic AI

Water-induced erosion progresses through splash, sheet, rill, and gully stages as runoff concentrates and gains velocity.

RUSLE computes average annual soil loss as A = R times K times LS times C times P, where R is rainfall erosivity, K is soil erodibility, LS is slope length and steepness, C is cover management, and P is support practice.

The C (cover management) factor is the one a landscape architect most directly controls, since establishing vegetation or applying mulch reduces it by an order of magnitude.

The NPDES Construction General Permit applies to land disturbance of 1.0 acre or more, including smaller sites that are part of a larger common plan of development or sale.

The SWPPP must be site-specific, kept on site, updated as conditions change, and supported by documented inspections; a generic plan in a binder does not satisfy the permit.

Last updated: September 2026

Core Focus: Construction activities remove protective vegetative cover, exposing bare subsoils to raindrop impact and concentrated runoff. Landscape architects bear direct legal and professional responsibility for preventing off-site sediment transport under the Clean Water Act. Mastery of erosion mechanics, the RUSLE equation, NPDES Phase I and II permitting, SWPPP preparation, structural BMP detailing, and inspection protocols is mandatory for LARE Section 4.

1. Soil Erosion Mechanics & Classification

Erosion is the physical detachment, entrainment, and transport of soil particles by water, wind, gravity, or ice. Sedimentation is the subsequent deposition of detached particles when flow velocity drops below transport thresholds. +-------------------------------------------------------------------------+

  • | STAGES OF WATER-INDUCED SOIL EROSION |
  • +-------------------------------------------------------------------------+
  • | 1. RAINDROP SPLASH: Terminal velocity impact breaks soil crust |
  • | Loosens particles and launches them up to 5' |
  • | │ |
  • | ▼ |
  • | 2. SHEET EROSION: Shallow, laminar overland flow peels topsoil |
  • | Uniform, imperceptible loss across large areas |
  • | │ |
  • | ▼ |
  • | 3. RILL EROSION: Concentrated flow carves small parallel channels |
  • | Depth < 12 inches; repairable by normal grading |
  • | │ |
  • | ▼ |
  • | 4. GULLY EROSION: Large, deep, destructive chasms carve into soil |
  • | Depth > 12 inches; cannot be traversed by mowers |
  • | │ |
  • | ▼ |
  • | 5. STREAM CHANNEL: Scouring of riverbanks and bedload incision |
  • +-------------------------------------------------------------------------+
  • The Four Sequential Stages of Water Erosion

Raindrop Splash Erosion: Raindrops falling at terminal velocity (up to 20 to 30 feet per second) impart immense kinetic energy upon bare soil. The impact shatters bonded soil aggregates, dislodging individual particles and launching them up to 5 feet laterally and 2 feet vertically. Dislodged fine clays wash into surface macropores, sealing the soil surface with an impermeable crust that drastically reduces infiltration and triggers immediate overland runoff.

Sheet Erosion: Shallow, unconfined overland runoff moving as a thin, continuous laminar film across the ground plane. Sheet flow peels microscopic soil particles evenly from the landform. Sheet erosion is insidious because it occurs without visible channel cuts, stripping valuable topsoil unnoticed over entire construction seasons.

Rill Erosion: As sheet runoff moves down-gradient, micro-topographic irregularities force water to concentrate into distinct micro-channels or rivulets called rills . Velocity and tractive shear stress increase, carving parallel incisions into the soil. Definition: Rills are small enough (depth < 12 inches / 30 cm < 12\text{ inches} / 30\text{ cm} < 12 inches /30 cm ) to be erased and smoothed out during standard agricultural tillage or site rough grading.

Gully Erosion: When rills converge into major flow paths, the concentrated volume and torrential velocity carve severe, deep chasms into the terrain. Definition: Gullies are channels deeper than 12 inches (1.0 foot / 30 cm) that cannot be smoothed or crossed by standard grading equipment or farm tractors. Gully erosion causes catastrophic sediment yields, undermines foundations, and destroys site infrastructure.

Stream Channel Erosion: Occurs when increased volume and peak velocity from upstream urban runoff scours natural creek beds and undercuts vegetated stream banks, causing mass bank collapse.

2. The Revised Universal Soil Loss Equation (RUSLE)

The Revised Universal Soil Loss Equation (RUSLE) is the standard mathematical model developed by the USDA Agricultural Research Service (ARS) to predict the long-term average annual rate of sheet and rill erosion on a given site. A = R ⋅ K ⋅ L S ⋅ C ⋅ P A = R \cdot K \cdot LS \cdot C \cdot P A = R ⋅ K ⋅ L S ⋅ C ⋅ P

Parameter Definitions and Landscape Architecture Interventions

A A A = Computed Spatial Average Soil Loss (tons per acre per year): The gross mass of soil displaced from the slope.

R R R = Rainfall-Runoff Erosivity Factor: Quantifies the kinetic energy and maximum 30-minute intensity ( E I 30 EI_{30} E I 30 ​ ) of geographic rainfall. Values range from < 20 < 20 < 20 in the arid Southwest to > 300 > 300 > 300 in the humid Gulf Coast. The landscape architect cannot alter R R R (it is a fixed climatic property).

K K K = Soil Erodibility Factor: Measures the inherent susceptibility of a specific soil type to detachment and transport based on soil texture, organic matter content, soil structure, and permeability. Values range from 0.02 0.02 0.02 to 0.69 0.69 0.69 :

High Erodibility ( K > 0.40 K > 0.40 K > 0.40 ): Silt loams, very fine sands, and silts (easily detached and easily transported).

Low Erodibility ( K < 0.20 K < 0.20 K < 0.20 ): Coarse sands, gravels (heavy particles resistant to transport), and well-aggregated high-plasticity clays (chemically bonded aggregates resistant to detachment).

L S LS L S = Topographic Factor (Length and Steepness): The ratio of soil loss from a specific field slope relative to a standard test plot (72.6 ft length, 9% slope). Combines slope length ( L L L ) and slope gradient ( S S S ):

Steeper slopes dramatically accelerate velocity and shear stress.

Longer uninterrupted slopes accumulate greater runoff volume and erosive power.

Landscape Architecture Intervention: Designers manipulate L S LS L S by breaking long slopes into shorter segments using diversion berms, contour terraces, slope benches, and interceptor swales .

C C C = Cover Management Factor: The ratio of soil loss under a specified vegetative cover or mulch practice compared to clean-tilled bare fallow ground ( C = 1.0 C = 1.0 C = 1.0 ):

  • Bare disturbed soil: C = 1.00 C = 1.00 C = 1.00
  • Hydroseeded mulch with tackifier: C = 0.10 to 0.05 C = 0.10\text{ to }0.05 C = 0.10 to 0.05

Temporary straw mulch ( 2 tons/acre 2\text{ tons/acre} 2 tons/acre ): C = 0.05 to 0.02 C = 0.05\text{ to }0.02 C = 0.05 to 0.02

Erosion Control Blankets (ECBs): C = 0.02 to 0.005 C = 0.02\text{ to }0.005 C = 0.02 to 0.005

Dense mature perennial turf / native forest: C = 0.005 to 0.001 C = 0.005\text{ to }0.001 C = 0.005 to 0.001 ( 99.9 % 99.9\% 99.9% reduction in soil loss).

Landscape Architecture Intervention: The C C C factor is the single most powerful tool under designer control on a construction site.

P P P = Support Practice Factor: The ratio of soil loss with a specific structural conservation practice (contouring, terracing, silt fences, sediment basins) to up-and-down slope cultivation ( P = 1.0 P = 1.0 P = 1.0 ).

3. Regulatory Framework: Clean Water Act, NPDES & SWPPP Mandates

Under Section 402 of the federal Clean Water Act (CWA) , the US Environmental Protection Agency (EPA) established the National Pollutant Discharge Elimination System (NPDES) to control pollutant discharges from point sources into Waters of the United States.

NPDES Permitting Thresholds

NPDES Phase I (1990): Mandated permit coverage for large construction activities disturbing 5.0 acres or more of total land area.

NPDES Phase II (1999 / 2003): Expanded regulatory oversight to small construction activities disturbing between 1.0 and 5.0 acres of total land area.

The Common Plan Rule: Any site disturbance less than 1.0 acre is legally subject to NPDES permitting if the activity is part of a "larger common plan of development or sale" that collectively disturbs 1.0 acre or more (e.g., grading a 0.25-acre outparcel within a 10-acre commercial subdivision).

Construction General Permit (CGP) & SWPPP Workflow

To legally discharge stormwater from a regulated construction site, the owner/operator must secure authorization under the EPA or state-delegated Construction General Permit (CGP) :

Develop a SWPPP: Author a comprehensive, site-specific Stormwater Pollution Prevention Plan (SWPPP) prior to turning a single shovel of earth.

File Notice of Intent (NOI): Submit a formal electronic Notice of Intent (NOI) to the regulatory authority (EPA or state environmental agency) at least 7 to 14 days prior to commencing ground-disturbing construction.

Post Public Notice: Post the CGP permit tracking number and site contact info publicly at the construction entrance.

Implement Phased BMPs: Install perimeter controls, stabilized entrances, and sediment basins before clearing and grubbing interior areas.

Inspect & Maintain: Execute certified site inspections, log maintenance repairs, and update the SWPPP as field conditions evolve.

Achieve Final Stabilization & File NOT: When construction is finished and the site reaches statutory final stabilization, submit a Notice of Termination (NOT) to legally extinguish permit liability.

Final Stabilization Criteria for Notice of Termination (NOT)

Under EPA CGP standards, a site has achieved Final Stabilization only when:

All bare, disturbed soil areas have established a uniform, perennial native vegetative cover with a density of at least 70% of the background natural vegetative cover (or permanent structural equivalent such as asphalt, concrete, or permanent riprap armoring).

All temporary structural BMPs (silt fences, sandbags, inlet baskets, sediment traps) have been completely dismantled and removed, and any soil disturbed during removal has been stabilized.