Study guide
6.5 Renewable Energy and Carbon Offsets
LEED AP Building Design + Construction BD+C
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 Current Exam Facts 1.2 How to Use This Guide
2 Chapter 2: Integrative Process
2.1 Integrative Process Philosophy and Workflow 2.2 Integrative Process Credit (IP) 2.3 Prerequisites and Project Setup 2.4 Certification Levels and Scorecard
3 Chapter 3: Location & Transportation + Surroundings
3.1 LEED for Neighborhood Development Location 3.2 Sensitive Land Protection & High Priority Site 3.3 Surrounding Density and Diverse Uses 3.4 Access to Quality Transit 3.5 Bicycle Facilities, Reduced Parking, Green Vehicles 3.6 Building Surroundings and Joint Use
4 Chapter 4: Sustainable Sites (SS)
4.1 SS Prerequisite: Construction Activity Pollution Prevention 4.2 Site Assessment and Site Development 4.3 Open Space and Rainwater Management 4.4 Heat Island Reduction 4.5 Light Pollution Reduction
5 Chapter 5: Water Efficiency (WE)
5.1 WE Prerequisites 5.2 Outdoor and Indoor Water Use Reduction Credits 5.3 Cooling Tower Water Use, Process Water, and Metering 5.4 Non-Potable and Reclaimed Water Strategies
6 Chapter 6: Energy & Atmosphere (EA)
6.1 EA Prerequisites 6.2 Optimize Energy Performance 6.3 Enhanced Commissioning 6.4 Advanced Energy Metering and Grid Harmonization 6.5 Renewable Energy and Carbon Offsets 6.6 ASHRAE 90.1-2016 Fundamentals
7 Chapter 7: Materials & Resources (MR)
7.1 MR Prerequisites 7.2 Building Life-Cycle Impact Reduction (BLIR) 7.3 Building Product Disclosure and Optimization (BPDO) 7.4 Construction and Demolition Waste Management 7.5 PBT Source Reduction and Furniture Material
8 Chapter 8: Indoor Environmental Quality (EQ)
8.1 EQ Prerequisites 8.2 Enhanced IAQ Strategies and Low-Emitting Materials 8.3 Construction IAQ Management and Assessment 8.4 Thermal Comfort 8.5 Interior Lighting and Daylight 8.6 Quality Views and Acoustic Performance
9 Chapter 9: Innovation, Regional Priority & Project Types
9.1 Innovation Credits 9.2 Regional Priority Credits 9.3 BD+C Project Types and Scope 9.4 Project Registration, Documentation, and Certification Process 9.5 Last-Minute Exam Tips
6.5 Renewable Energy and Carbon Offsets
Key Takeaways Explain This Topic AI
EA Credit: Renewable Energy is worth 1–5 points in LEED v4.1 and combines the former Renewable Energy Production and Green Power and Carbon Offsets credits into one tiered scale
The credit awards points based on the percentage of the building's total annual energy supplied by a tiered mix of Tier 1 (on-site), Tier 2 (off-site Power Purchase Agreements with new generation), and Tier 3 (Renewable Energy Certificates / carbon offsets)
Net-zero energy is a recognized pathway and can earn the maximum 5 points when on-site plus contracted off-site renewables equal or exceed 100% of annual energy use
EA Credit: Enhanced Refrigerant Management is worth 1 point and rewards low-ODP and low-GWP refrigerants using the formula LCGWP + LCODP × 10⁵ ≤ 100 (LEED v4) / ≤ 13 (LEED v4.1)
Compliance can also be achieved by using equipment with no refrigerants or with natural refrigerants such as ammonia (R-717), CO₂ (R-744), water (R-718), or hydrocarbons
Last updated: May 2026
Two Credits, One Mission: Lower Atmospheric Impact
EA Credit: Renewable Energy and EA Credit: Enhanced Refrigerant Management together address the climate-impact side of the EA category that the prerequisites only partially cover.
Quick Answer: Renewable Energy (1–5 pts) rewards the percentage of annual energy supplied by renewables in a tiered hierarchy (on-site > off-site PPA > RECs/offsets). Enhanced Refrigerant Management (1 pt) rewards low-ODP and low-GWP refrigerant choices using a life-cycle direct-impact formula.
- EA Credit: Renewable Energy (1–5 points)
- What Changed in LEED v4.1
LEED v4 had two separate credits: Renewable Energy Production (up to 3 pts for on-site generation) and Green Power and Carbon Offsets (up to 2 pts for off-site contracts). LEED v4.1 combined them into a single EA Credit: Renewable Energy with a tiered scale up to 5 points .
Tiered Renewable Sources
Tier Source Why It Scores Highest
Tier 1 On-site renewables (PV, wind, geothermal, eligible biofuels, solar thermal) Direct displacement of purchased energy; verifiable
Tier 2 Off-site renewables via Power Purchase Agreements (PPAs) with new generation, with bundled RECs Adds new capacity to the grid
Tier 3 Unbundled Renewable Energy Certificates (RECs) and certified carbon offsets Lowest additionality; cheapest path
Tiered Point Table (v4.1 simplified)
- % of Total Annual Energy from Renewables Points (NC)
- 5% 1
- 10% 2
- 15% 3
- 20% 4
- 50% 5
- 100% (Net Zero) 5 + recognition
RECs and carbon offsets must be Green-e Energy certified or equivalent and have at least a five-year contract commitment.
Net-Zero Pathway
The credit explicitly recognizes the net-zero energy building — one whose on-site plus contracted off-site renewables equal or exceed total annual energy consumption. Net zero earns the full 5 points and unlocks recognition under the LEED Zero program.
How This Stacks With Optimize Energy Performance
On-site renewable generation reduces purchased energy in the Appendix G model, which raises the percent savings reported under Optimize Energy Performance. The same kWh of solar therefore contributes to both credits — a multiplier effect that makes PV one of the highest-leverage LEED investments.
- EA Credit: Enhanced Refrigerant Management (1 point)
- What It Adds Beyond the Prerequisite
The fundamental prerequisite addresses ozone depletion potential (ODP) only. The enhanced credit adds global warming potential (GWP) so that refrigerants are evaluated on both atmospheric impacts.
Three Compliance Paths
No refrigerants at all — typical of natural-ventilation projects or small all-electric heat-source systems.
Natural refrigerants with ODP = 0 and GWP ≤ 50:
- R-717 Ammonia (NH₃) — industrial chilled water plants
- R-744 Carbon Dioxide (CO₂) — transcritical refrigeration and heat pumps
- R-718 Water (H₂O) — absorption chillers, evaporative cooling
- R-290 Propane, R-600a Isobutane , other hydrocarbons — small refrigeration
Refrigerant impact calculation — evaluate each refrigerant's life-cycle direct atmospheric impact using: LCGWP + LCODP × 10⁵ ≤ 100 (LEED v4 NC)
LCGWP + LCODP × 10⁵ ≤ 13 (LEED v4.1 simplified threshold)
Where:
- LCGWP = life-cycle direct global warming potential (lb CO₂e/ton-yr) = GWPᵣ × [(Lr × Life + Mr) × Rc / Life]
- LCODP = life-cycle ozone depletion potential (lb CFC-11/ton-yr) = ODPᵣ × [(Lr × Life + Mr) × Rc / Life]
- Lr = annual refrigerant leakage rate (default 2%)
- Mr = end-of-life refrigerant loss (default 10%)
- Life = equipment lifetime (default 10 years for unitary, 20 years for chillers)
- Rc = refrigerant charge (lb of refrigerant per ton of cooling capacity)
- Common Refrigerants on the Exam
- Refrigerant ODP GWP Status
- CFC-11 / CFC-12 1.0 / 1.0 High Prohibited (prerequisite)
- HCFC-22 (R-22) 0.04 1,810 Phasing out globally
- HFC R-134a 0 1,430 Common; usually fails enhanced threshold
- HFC R-410A 0 2,088 Common; usually fails enhanced threshold
- HFO R-1234yf, R-1234ze 0 < 10 Passes
- R-717 NH₃ 0 0 Natural; passes
- R-744 CO₂ 0 1 Natural; passes