Study guide

9.5 Last-Minute Exam Tips

LEED AP Building Design + Construction BD+C

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Overview

1.1 Current Exam Facts 1.2 How to Use This Guide

2 Chapter 2: Integrative Process

2.1 Integrative Process Philosophy and Workflow 2.2 Integrative Process Credit (IP) 2.3 Prerequisites and Project Setup 2.4 Certification Levels and Scorecard

3 Chapter 3: Location & Transportation + Surroundings

3.1 LEED for Neighborhood Development Location 3.2 Sensitive Land Protection & High Priority Site 3.3 Surrounding Density and Diverse Uses 3.4 Access to Quality Transit 3.5 Bicycle Facilities, Reduced Parking, Green Vehicles 3.6 Building Surroundings and Joint Use

4 Chapter 4: Sustainable Sites (SS)

4.1 SS Prerequisite: Construction Activity Pollution Prevention 4.2 Site Assessment and Site Development 4.3 Open Space and Rainwater Management 4.4 Heat Island Reduction 4.5 Light Pollution Reduction

5 Chapter 5: Water Efficiency (WE)

5.1 WE Prerequisites 5.2 Outdoor and Indoor Water Use Reduction Credits 5.3 Cooling Tower Water Use, Process Water, and Metering 5.4 Non-Potable and Reclaimed Water Strategies

6 Chapter 6: Energy & Atmosphere (EA)

6.1 EA Prerequisites 6.2 Optimize Energy Performance 6.3 Enhanced Commissioning 6.4 Advanced Energy Metering and Grid Harmonization 6.5 Renewable Energy and Carbon Offsets 6.6 ASHRAE 90.1-2016 Fundamentals

7 Chapter 7: Materials & Resources (MR)

7.1 MR Prerequisites 7.2 Building Life-Cycle Impact Reduction (BLIR) 7.3 Building Product Disclosure and Optimization (BPDO) 7.4 Construction and Demolition Waste Management 7.5 PBT Source Reduction and Furniture Material

8 Chapter 8: Indoor Environmental Quality (EQ)

8.1 EQ Prerequisites 8.2 Enhanced IAQ Strategies and Low-Emitting Materials 8.3 Construction IAQ Management and Assessment 8.4 Thermal Comfort 8.5 Interior Lighting and Daylight 8.6 Quality Views and Acoustic Performance

9 Chapter 9: Innovation, Regional Priority & Project Types

9.1 Innovation Credits 9.2 Regional Priority Credits 9.3 BD+C Project Types and Scope 9.4 Project Registration, Documentation, and Certification Process 9.5 Last-Minute Exam Tips

9.5 Last-Minute Exam Tips

Key Takeaways Explain This Topic AI

Memorize standard versions and thresholds: ASHRAE 90.1-2016 (energy), 62.1-2016 (ventilation), 55-2017 (thermal comfort); IES TM-30 with sDA ≥55% and ASE <10% (daylight); CDPH v1.2 (VOC); MERV 13 (filtration).

Memorize the key LEED numbers: 40/50/60/80 certification thresholds, 30% open space, 22,000 sf/acre density, 75% C&D waste diversion, 25% recycled content for Exemplary Performance MR, 95th-percentile rainwater event.

Allocate roughly 60 seconds per question on the 100-question, 2-hour exam — flag harder questions on the first pass and return to them rather than getting stuck.

Beware absolute words like 'always', 'never', 'only', 'must', 'all' — they often signal a wrong answer because LEED has many conditional rules and exceptions.

Bring a valid government-issued photo ID; scratch paper and pencils (or whiteboard for online proctored) are provided — no personal materials are allowed in the test area.

Last updated: May 2026

High-Yield Numbers You Must Memorize

The LEED AP BD+C exam reuses a short list of standards, thresholds, and percentages across many questions. Lock these in before exam day.

Referenced Standards (current LEED v4.1)

  • Category Standard What It Sets
  • Energy baseline ASHRAE 90.1-2016 , Appendix G Energy modeling baseline for EA Optimize Energy Performance
  • Ventilation ASHRAE 62.1-2016 Minimum outdoor air for indoor air quality
  • Thermal comfort ASHRAE 55-2017 Acceptable indoor temperature/humidity range
  • Lighting quality IES TM-30 Color rendering metric (replaces simple CRI)
  • Daylight sDA ≥55%, ASE <10% Spatial Daylight Autonomy / Annual Sunlight Exposure thresholds
  • Water fixtures EPA WaterSense Maximum flow/flush for showers, faucets, water closets
  • Indoor VOC CDPH v1.2 (California Section 01350) Emissions limits for paints, adhesives, flooring, ceilings
  • Wood sourcing FSC (Forest Stewardship Council) chain-of-custody Sustainable forest products

Material disclosure EPD (Environmental Product Declaration) / HPD (Health Product Declaration) Transparency for MR Building Product Disclosure

  • Filtration MERV 13 Particulate filter minimum for EQ Enhanced IAQ Strategies
  • Key Percentage and Threshold Numbers
  • Topic Threshold
  • Certification levels Certified 40 / Silver 50 / Gold 60 / Platinum 80 (out of 110)
  • Total available points 100 base + 6 IN + 4 RP = 110
  • Open Space 30% of site as open space (60% for Exemplary Performance)
  • Surrounding Density 22,000 sf of building area per acre within ½-mile radius
  • C&D Waste Diversion 75% diversion (Exemplary at ~95%)
  • Rainwater Management 95th-percentile rainfall event managed on site
  • Indoor Water Reduction 25% mandatory (prerequisite) / up to 50% reduction for full points
  • Outdoor Water Reduction 50% reduction baseline (prerequisite); 100% for full points
  • Energy Reduction Up to 24% for top tier in EA Optimize Energy Performance (Exemplary doubles to 48–50%)
  • Heat Island — non-roof SR ≥0.33 at installation, 0.28 after 3 years (or SRI 29/15)
  • Heat Island — roof SRI 82 for low-slope, 39 for steep-slope
  • Daylight sDA ≥55% (good); sDA ≥75% (best); ASE <10% to limit glare
  • Acoustic — Schools Background noise ≤35 dBA in core learning spaces
  • Recognizing Question Patterns

LEED AP BD+C questions tend to fall into four shapes:

Definition questions — "What is a Credit Interpretation Ruling?" → Answer is the textbook definition.

Numeric questions — "What is the maximum SRI required for a low-slope roof to meet the Heat Island credit?" → Memorized number wins.

Scenario questions — "A project team discovers... what is their BEST next step?" → Pick the answer that follows GBCI process correctly.

Synergy questions — "Which credit MOST DIRECTLY supports this one?" → Look for the category pair you have seen repeated (e.g., daylight + lighting controls, rainwater + open space).

  • Test-Taking Strategies
  • Time Management

The exam is 100 questions in 2 hours — that is 72 seconds per question on average, often rounded to 60 seconds as a target with buffer time.

Flag and skip questions you cannot answer in 90 seconds; return to them after the first pass.

Plan to leave 15 minutes at the end for flagged questions and a final scan.

Eliminating Wrong Answers

Eliminate clearly wrong options first — many questions have one absurd answer and one almost-right distractor.

Watch for absolute words : 'always', 'never', 'only', 'must', 'all', 'every'. LEED rarely operates in absolutes because credits include exceptions, alternate paths, and thresholds.

Watch for answer pairs — when two options are mirror opposites, one of them is usually correct.

Reading the Question Fully

Read every word — qualifiers like 'BEST', 'MOST', 'EXCEPT', 'NOT', 'FIRST' change the right answer.

Re-read the question after picking an answer if you have time.

The stem and answers must agree — do not pick an answer because the option itself is true; pick the one that answers the specific question .

Guessing Strategy

There is no penalty for wrong answers — answer every question.

If forced to guess, eliminate two clearly wrong options first; the remaining two give you a 50% shot rather than 25%.

  • What to Bring to the Test
  • Allowed

Two forms of ID — one government-issued photo ID (driver's license, passport) and one secondary ID with matching name

  • A confirmation email or appointment number (Prometric or online proctored)
  • Provided at the Test Center
  • Scratch paper and pencils (in-person testing centers)
  • A whiteboard and marker (online proctored testing)
  • A calculator is built into the exam interface — no personal calculators allowed
  • NOT Allowed
  • Personal notes, the LEED Reference Guide, or any printed material
  • Phones, smartwatches, fitness trackers, or other electronics
  • Food, beverages, hats, jackets, or bags inside the test area (storage lockers provided)
  • Online Proctoring Specifics
  • A clean, quiet, private room is required — no other people, no second monitors, no posters with text
  • The proctor will scan the room via webcam before the exam begins
  • Bathroom breaks are not allowed during the 2-hour LEED AP BD+C exam
  • Final 48-Hour Plan
  • When Do
  • 2 days before Review the high-yield numbers table above, run a final timed practice exam
  • 1 day before Light review only — quizlet of standards versions, a walk, full meal, early sleep
  • Morning of Eat protein, hydrate moderately, arrive 30 minutes early, bring both IDs
  • During exam First pass at 60 sec/Q, flag the hard ones, then second pass, then 15-min review
  • After exam Score is shown immediately on screen; passing score is 170 of 200 scaled

A reminder: the BD+C exam is 170 of 200 scaled score to pass — that translates to roughly 70–75% correct, depending on item difficulty weighting.