Study guide
1.2 How to Use This Guide
LEED AP Building Design + Construction BD+C
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 Current Exam Facts 1.2 How to Use This Guide
2 Chapter 2: Integrative Process
2.1 Integrative Process Philosophy and Workflow 2.2 Integrative Process Credit (IP) 2.3 Prerequisites and Project Setup 2.4 Certification Levels and Scorecard
3 Chapter 3: Location & Transportation + Surroundings
3.1 LEED for Neighborhood Development Location 3.2 Sensitive Land Protection & High Priority Site 3.3 Surrounding Density and Diverse Uses 3.4 Access to Quality Transit 3.5 Bicycle Facilities, Reduced Parking, Green Vehicles 3.6 Building Surroundings and Joint Use
4 Chapter 4: Sustainable Sites (SS)
4.1 SS Prerequisite: Construction Activity Pollution Prevention 4.2 Site Assessment and Site Development 4.3 Open Space and Rainwater Management 4.4 Heat Island Reduction 4.5 Light Pollution Reduction
5 Chapter 5: Water Efficiency (WE)
5.1 WE Prerequisites 5.2 Outdoor and Indoor Water Use Reduction Credits 5.3 Cooling Tower Water Use, Process Water, and Metering 5.4 Non-Potable and Reclaimed Water Strategies
6 Chapter 6: Energy & Atmosphere (EA)
6.1 EA Prerequisites 6.2 Optimize Energy Performance 6.3 Enhanced Commissioning 6.4 Advanced Energy Metering and Grid Harmonization 6.5 Renewable Energy and Carbon Offsets 6.6 ASHRAE 90.1-2016 Fundamentals
7 Chapter 7: Materials & Resources (MR)
7.1 MR Prerequisites 7.2 Building Life-Cycle Impact Reduction (BLIR) 7.3 Building Product Disclosure and Optimization (BPDO) 7.4 Construction and Demolition Waste Management 7.5 PBT Source Reduction and Furniture Material
8 Chapter 8: Indoor Environmental Quality (EQ)
8.1 EQ Prerequisites 8.2 Enhanced IAQ Strategies and Low-Emitting Materials 8.3 Construction IAQ Management and Assessment 8.4 Thermal Comfort 8.5 Interior Lighting and Daylight 8.6 Quality Views and Acoustic Performance
9 Chapter 9: Innovation, Regional Priority & Project Types
9.1 Innovation Credits 9.2 Regional Priority Credits 9.3 BD+C Project Types and Scope 9.4 Project Registration, Documentation, and Certification Process 9.5 Last-Minute Exam Tips
1.2 How to Use This Guide
Key Takeaways Explain This Topic AI
The guide follows the GBCI content outline across 9 chapters, with study weight concentrated in Energy & Atmosphere, Materials & Resources, and Indoor Environmental Quality.
Plan for 60-100 hours of focused study, biased upward if you are not currently working on active LEED projects.
Use the loop of read, in-section quizzes, /practice/leed-ap-bdc, flashcards, and timed 100-question simulations to build both recall and exam stamina.
Last updated: May 2026
The 9-Chapter Roadmap
This guide mirrors the official GBCI content outline so the chapter numbers match the same domains you will see on your score report. Read chapters in order on a first pass - each one assumes the vocabulary established in the prior chapter.
- Chapter Title Aligns To
- 1 Introduction & Exam Overview Exam logistics, scoring, registration
- 2 Integrative Process & LEED Process LEED Process + Integrative Strategies (~20%)
- 3 Location & Transportation + Project Surroundings LT + Project Surroundings & Outreach (~16%)
- 4 Sustainable Sites SS credit category (~11%)
- 5 Water Efficiency WE credit category (~11%)
- 6 Energy & Atmosphere EA credit category (~17%) - largest domain
- 7 Materials & Resources MR credit category (~14%)
- 8 Indoor Environmental Quality EQ credit category (~13%)
- 9 Innovation, Regional Priority & Exam-Day Strategy Process bonuses + scoring tradeoffs
If you are short on time, do not skip chapters - but front-load Chapters 6, 7, and 8 . Those three categories alone account for roughly 44% of scored items .
Recommended Workflow
A single pass through a study guide rarely produces a passing score on a scenario-based exam. Use the loop below:
Read the chapter end-to-end, taking notes on credit names, intent statements, and threshold values (percentages, square footage, distances).
Answer in-section quizzes without looking back. Quizzes are short by design so that a wrong answer is a signal, not a setback.
Drill on /practice/leed-ap-bdc for the domain you just finished. The practice surface mixes scenario items across rating systems (NC, CS, Schools, Healthcare, etc.) the way the real exam does.
Cycle flashcards for credit names, prerequisite vs. credit distinctions, and threshold numbers - the category where most candidates lose points.
Take timed full-length 100-question simulations in the final 2 weeks. Sit for the full 120 minutes; train your pacing at roughly 1 minute 12 seconds per item .
How Long Should You Study?
GBCI does not publish an official study-hour requirement. Based on candidate-reported norms and our internal review:
60-80 hours is typical for candidates actively working on LEED-registered projects who already use the rating system day-to-day.
80-100+ hours is more realistic for candidates who passed the LEED Green Associate recently but are not currently on LEED project teams .
Spread study over 5-9 weeks rather than cramming. The exam tests recognition of subtle tradeoffs - distributed practice improves retention more than block study.
Where BD+C Sits Among the LEED AP Specialties
LEED AP is offered in five specialty tracks , each tied to a different LEED rating-system family:
LEED AP BD+C - Building Design + Construction (this guide). The most pursued specialty.
LEED AP ID+C - Interior Design + Construction (commercial interiors, retail, hospitality fit-outs).
LEED AP O+M - Building Operations + Maintenance (existing buildings).
LEED AP ND - Neighborhood Development (district and master-planned scale).
LEED AP Homes - residential single-family and low-rise multifamily.
The Green Associate foundation knowledge is shared across all five; only the specialty layer differs. If you later decide to add ID+C or O+M, you only sit for the additional Specialty exam - the GA does not need to be retaken.
What This Guide Will Not Replace
This guide is a structured, exam-focused companion - not a substitute for the LEED v4.1 BD+C Reference Guide , which remains the primary source of truth for credit intents, requirements, and calculation paths. When the Reference Guide and any third-party material disagree, trust the Reference Guide. Your goal is to be able to read a 4-sentence scenario, recognize which credit category and credit it maps to, and identify the threshold the project must meet.