Study guide
3.2 Sensitive Land Protection & High Priority Site
LEED AP Building Design + Construction BD+C
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 Current Exam Facts 1.2 How to Use This Guide
2 Chapter 2: Integrative Process
2.1 Integrative Process Philosophy and Workflow 2.2 Integrative Process Credit (IP) 2.3 Prerequisites and Project Setup 2.4 Certification Levels and Scorecard
3 Chapter 3: Location & Transportation + Surroundings
3.1 LEED for Neighborhood Development Location 3.2 Sensitive Land Protection & High Priority Site 3.3 Surrounding Density and Diverse Uses 3.4 Access to Quality Transit 3.5 Bicycle Facilities, Reduced Parking, Green Vehicles 3.6 Building Surroundings and Joint Use
4 Chapter 4: Sustainable Sites (SS)
4.1 SS Prerequisite: Construction Activity Pollution Prevention 4.2 Site Assessment and Site Development 4.3 Open Space and Rainwater Management 4.4 Heat Island Reduction 4.5 Light Pollution Reduction
5 Chapter 5: Water Efficiency (WE)
5.1 WE Prerequisites 5.2 Outdoor and Indoor Water Use Reduction Credits 5.3 Cooling Tower Water Use, Process Water, and Metering 5.4 Non-Potable and Reclaimed Water Strategies
6 Chapter 6: Energy & Atmosphere (EA)
6.1 EA Prerequisites 6.2 Optimize Energy Performance 6.3 Enhanced Commissioning 6.4 Advanced Energy Metering and Grid Harmonization 6.5 Renewable Energy and Carbon Offsets 6.6 ASHRAE 90.1-2016 Fundamentals
7 Chapter 7: Materials & Resources (MR)
7.1 MR Prerequisites 7.2 Building Life-Cycle Impact Reduction (BLIR) 7.3 Building Product Disclosure and Optimization (BPDO) 7.4 Construction and Demolition Waste Management 7.5 PBT Source Reduction and Furniture Material
8 Chapter 8: Indoor Environmental Quality (EQ)
8.1 EQ Prerequisites 8.2 Enhanced IAQ Strategies and Low-Emitting Materials 8.3 Construction IAQ Management and Assessment 8.4 Thermal Comfort 8.5 Interior Lighting and Daylight 8.6 Quality Views and Acoustic Performance
9 Chapter 9: Innovation, Regional Priority & Project Types
9.1 Innovation Credits 9.2 Regional Priority Credits 9.3 BD+C Project Types and Scope 9.4 Project Registration, Documentation, and Certification Process 9.5 Last-Minute Exam Tips
3.2 Sensitive Land Protection & High Priority Site
Key Takeaways Explain This Topic AI
LT Credit: Sensitive Land Protection (1-2 pts) discourages building on prime farmland, floodplains, habitat for protected species, water-body buffers, and wetland buffers.
Prime farmland is defined by NRCS soil classes I, II, and III (sometimes referenced as 'unique farmland' and 'farmland of statewide importance').
Floodplain protection uses the FEMA 100-year (1% annual chance) floodplain; some references also include the 500-year (0.2% annual chance) zone.
Required water-body and wetland setbacks are 100 feet from a water body and 50 feet from a wetland.
LT Credit: High Priority Site (2-3 pts) rewards development on brownfields, EPA-designated priority sites, historic districts, Low-Income Housing Tax Credit areas, or local-equivalent priority zones.
Last updated: May 2026
Sensitive Land Protection (1-2 points)
The purpose of LT Credit: Sensitive Land Protection is to avoid the development of environmentally sensitive land and to reduce the ecological impact from the location of a building on a site. The credit offers two compliance options.
Option 1 — Locate on previously developed land (1 pt)
The entire development footprint must sit on land that was already altered by paving, construction, or land-clearing prior to project planning. Greenfields do not qualify.
Option 2 — Avoid sensitive land (1-2 pts)
The project may build on previously undeveloped land only if none of the development footprint falls on any of the following five categories of sensitive land.
Sensitive Land Category Definition / Threshold
Prime farmland Soils classified by the USDA Natural Resources Conservation Service (NRCS) as Class I, II, or III prime farmland, unique farmland, or farmland of statewide/local importance
Floodplain Land inside the FEMA 100-year floodplain (1% annual chance). The 500-year floodplain (0.2% annual chance) is treated more leniently in v4.1 but still triggers review
Habitat Land identified as habitat for species listed as threatened or endangered under the federal Endangered Species Act, NatureServe G1/G2, or state/local equivalent
- Water body Land within 100 feet of any water body — perennial or intermittent stream, lake, pond, ocean
- Wetland Land within 50 feet of any wetland (as defined by the federal Code of Federal Regulations)
Minor exceptions apply for shore-dependent infrastructure (e.g., a small footbridge crossing a stream), but the rule of thumb for the exam is: 100 ft from water, 50 ft from wetland, no prime farmland, no 100-yr floodplain, no protected habitat .
High Priority Site (2-3 points)
LT Credit: High Priority Site is the conceptual mirror of Sensitive Land Protection. Instead of avoiding harm, it rewards going to sites that need investment. There are three primary compliance pathways.
Option 1 — Historic district (2 pts)
Locate the project in an infill location within a historic district listed on the National Register or a state/local equivalent.
Option 2 — Priority designation (2 pts)
Locate on a site that the EPA, state, or local government has formally designated as a priority for redevelopment. Common designations include EPA Brownfields Program areas, Federal Empowerment Zones, Federal Enterprise Communities, Federal Renewal Communities, and state-designated Low-Income Housing Tax Credit (LIHTC) qualified census tracts.
Option 3 — Brownfield remediation (3 pts)
Locate on a site identified as contaminated by means of an ASTM E1903-11 Phase II Environmental Site Assessment or a local equivalent, and complete remediation under a federal, state, or local voluntary cleanup program. This pathway earns the maximum 3 points because the project removes existing contamination rather than merely redeveloping clean land.
Strategic reading
For the exam, internalize the asymmetry: Sensitive Land = avoid; High Priority Site = seek . Watch the distractors: previously developed land qualifies for Sensitive Land Protection Option 1, but a previously developed greenfield is not automatically a high-priority site — the high-priority award requires a formal government designation or a documented contamination + cleanup record.
Synergies and conflicts
A brownfield that was historically a factory typically satisfies BOTH credits: it is previously developed (Sensitive Land Option 1) and it carries contamination eligible for remediation (High Priority Site Option 3). This is the highest-leverage location strategy short of an ND plan. Conflict: a pristine wetland adjacent to a federal empowerment zone cannot earn High Priority Site without violating Sensitive Land Protection — the wetland buffer rule wins.