Study guide
7.5 PBT Source Reduction and Furniture Material
LEED AP Building Design + Construction BD+C
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 Current Exam Facts 1.2 How to Use This Guide
2 Chapter 2: Integrative Process
2.1 Integrative Process Philosophy and Workflow 2.2 Integrative Process Credit (IP) 2.3 Prerequisites and Project Setup 2.4 Certification Levels and Scorecard
3 Chapter 3: Location & Transportation + Surroundings
3.1 LEED for Neighborhood Development Location 3.2 Sensitive Land Protection & High Priority Site 3.3 Surrounding Density and Diverse Uses 3.4 Access to Quality Transit 3.5 Bicycle Facilities, Reduced Parking, Green Vehicles 3.6 Building Surroundings and Joint Use
4 Chapter 4: Sustainable Sites (SS)
4.1 SS Prerequisite: Construction Activity Pollution Prevention 4.2 Site Assessment and Site Development 4.3 Open Space and Rainwater Management 4.4 Heat Island Reduction 4.5 Light Pollution Reduction
5 Chapter 5: Water Efficiency (WE)
5.1 WE Prerequisites 5.2 Outdoor and Indoor Water Use Reduction Credits 5.3 Cooling Tower Water Use, Process Water, and Metering 5.4 Non-Potable and Reclaimed Water Strategies
6 Chapter 6: Energy & Atmosphere (EA)
6.1 EA Prerequisites 6.2 Optimize Energy Performance 6.3 Enhanced Commissioning 6.4 Advanced Energy Metering and Grid Harmonization 6.5 Renewable Energy and Carbon Offsets 6.6 ASHRAE 90.1-2016 Fundamentals
7 Chapter 7: Materials & Resources (MR)
7.1 MR Prerequisites 7.2 Building Life-Cycle Impact Reduction (BLIR) 7.3 Building Product Disclosure and Optimization (BPDO) 7.4 Construction and Demolition Waste Management 7.5 PBT Source Reduction and Furniture Material
8 Chapter 8: Indoor Environmental Quality (EQ)
8.1 EQ Prerequisites 8.2 Enhanced IAQ Strategies and Low-Emitting Materials 8.3 Construction IAQ Management and Assessment 8.4 Thermal Comfort 8.5 Interior Lighting and Daylight 8.6 Quality Views and Acoustic Performance
9 Chapter 9: Innovation, Regional Priority & Project Types
9.1 Innovation Credits 9.2 Regional Priority Credits 9.3 BD+C Project Types and Scope 9.4 Project Registration, Documentation, and Certification Process 9.5 Last-Minute Exam Tips
7.5 PBT Source Reduction and Furniture Material
Key Takeaways Explain This Topic AI
PBT Source Reduction — Mercury (1 point) applies to Healthcare and Schools BD+C projects and rewards specifying low-mercury lamps that meet a project-weighted mercury cap.
PBT Source Reduction — Lead, Cadmium, and Copper (1-2 points) applies primarily to Healthcare projects and rewards substitution of these heavy metals in plumbing, roofing, and electrical components.
Furniture and Medical Furnishings (1-2 points) is Healthcare-only and requires at least 30% by cost of furniture to meet sustainability criteria such as multi-attribute certifications, ingredient disclosure, and salvaged/reused content.
Not all MR credits apply to every BD+C rating system — PBT and Furniture credits are mostly restricted to Healthcare and, in limited cases, Schools.
Persistent, Bioaccumulative, Toxic (PBT) chemicals like mercury, lead, and cadmium remain in the environment and accumulate up the food chain, justifying source reduction even at small quantities.
Last updated: May 2026
Why PBT Chemicals Are Singled Out
Persistent, Bioaccumulative, Toxic (PBT) chemicals are pollutants identified by the U.S. Environmental Protection Agency (EPA) and the Stockholm Convention that resist environmental degradation, build up in tissues over time, and pose long-term human-health risks. The MR category includes credits that explicitly reduce three of the most common building-related PBTs — mercury, lead, and cadmium — plus copper (added because of aquatic toxicity from copper roofing and copper plumbing leachate).
These credits apply to building types where occupant vulnerability and material quantities are highest: Healthcare projects (newborns, immunocompromised patients) and, for mercury, Schools (children).
- MR Credit: PBT Source Reduction — Mercury (1 point)
- Applies to: BD+C Healthcare, BD+C Schools
Intent: Reduce mercury releases associated with the manufacture, installation, operation, maintenance, and disposal of lamps.
Requirements: Specify lamps that meet a project-weighted average mercury content limit. The most common path uses a calculation expressed in picograms of mercury per lumen-hour (pg Hg/lm-hr) weighted by lamp count and rated life. LED lamps generally contain no mercury and easily satisfy the credit; older T8 and T5 fluorescents need to be low-mercury (typically TCLP-compliant).
- MR Credit: PBT Source Reduction — Lead, Cadmium, and Copper (1-2 points)
- Applies to: BD+C Healthcare
Intent: Reduce releases of lead, cadmium, and copper to the indoor and outdoor environment through substitution in building products.
Sample requirements:
Product Category Strategy
Plumbing pipes & fittings Use no-lead alloys (NSF 372 compliant); avoid copper for high-velocity domestic water where possible
- Roofing & flashing Avoid copper roofs that discharge into stormwater; use coated alternatives
- Solder Lead-free solder for potable water and electrical work
- Electrical wiring Aluminum or insulated alternatives where allowed; minimize exposed copper
- Batteries (back-up power) Avoid sealed lead-acid where lithium or nickel alternatives meet specs
Points scale with the breadth of substitution; achieving substitution across all major listed categories typically earns the full 2 points.
- MR Credit: Furniture and Medical Furnishings (1-2 points)
- Applies to: BD+C Healthcare
Intent: Promote furniture and medical furnishings that minimize exposure to toxic chemicals and source materials responsibly.
Requirements: At least 30% by cost of the total furniture and medical furnishings on the project (permanently installed and movable) must meet one or more of these criteria:
Multi-attribute sustainability certification — for example, ANSI/BIFMA e3 Level 2 or higher , Cradle to Cradle Silver or higher , or equivalent.
Salvaged, refurbished, or reused content above a threshold.
Recycled content that meets the BPDO recycled content rule (post-consumer + ½ pre-consumer ≥ 25%).
Bio-based content certified to the USDA BioPreferred program or Sustainable Agriculture Network's Sustainable Agriculture Standard .
FSC-certified wood for any wood components.
Material ingredient disclosure via HPD, Declare, C2C, or Product Lens.
A second point is available at a higher threshold (often 60% by cost) or for a deeper combination of criteria.
Which Credits Apply to Which Rating System?
Not every MR credit applies to every BD+C project. The applicability table below summarizes the headline cases.
- Credit NC Core & Shell Schools Retail Hospitality Data Centers Warehouse Healthcare
- MR Prereq: Storage & Collection of Recyclables ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
- MR Prereq: C&D Waste Management Planning ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
- MR Prereq: PBT Source Reduction — Mercury ✓
- Building Life-Cycle Impact Reduction ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
- BPDO — EPDs ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
- BPDO — Sourcing of Raw Materials ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
- BPDO — Material Ingredients ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
- C&D Waste Management ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
- PBT Source Reduction — Mercury (credit) ✓ ✓
- PBT Source Reduction — Lead, Cadmium, Copper ✓
- Furniture and Medical Furnishings ✓
- Exam Cue
If a question says "a LEED BD+C: NC office tower wants to specify low-lead plumbing fittings," the project can adopt the strategy but cannot earn the PBT Lead/Cadmium/Copper credit — that credit only exists in Healthcare. The point-bearing path in NC is Building Product Disclosure and Optimization — Material Ingredients (Section 7.3).