Study guide
4.2 Site Assessment and Site Development
LEED AP Building Design + Construction BD+C
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Exam Overview
1.1 Current Exam Facts 1.2 How to Use This Guide
2 Chapter 2: Integrative Process
2.1 Integrative Process Philosophy and Workflow 2.2 Integrative Process Credit (IP) 2.3 Prerequisites and Project Setup 2.4 Certification Levels and Scorecard
3 Chapter 3: Location & Transportation + Surroundings
3.1 LEED for Neighborhood Development Location 3.2 Sensitive Land Protection & High Priority Site 3.3 Surrounding Density and Diverse Uses 3.4 Access to Quality Transit 3.5 Bicycle Facilities, Reduced Parking, Green Vehicles 3.6 Building Surroundings and Joint Use
4 Chapter 4: Sustainable Sites (SS)
4.1 SS Prerequisite: Construction Activity Pollution Prevention 4.2 Site Assessment and Site Development 4.3 Open Space and Rainwater Management 4.4 Heat Island Reduction 4.5 Light Pollution Reduction
5 Chapter 5: Water Efficiency (WE)
5.1 WE Prerequisites 5.2 Outdoor and Indoor Water Use Reduction Credits 5.3 Cooling Tower Water Use, Process Water, and Metering 5.4 Non-Potable and Reclaimed Water Strategies
6 Chapter 6: Energy & Atmosphere (EA)
6.1 EA Prerequisites 6.2 Optimize Energy Performance 6.3 Enhanced Commissioning 6.4 Advanced Energy Metering and Grid Harmonization 6.5 Renewable Energy and Carbon Offsets 6.6 ASHRAE 90.1-2016 Fundamentals
7 Chapter 7: Materials & Resources (MR)
7.1 MR Prerequisites 7.2 Building Life-Cycle Impact Reduction (BLIR) 7.3 Building Product Disclosure and Optimization (BPDO) 7.4 Construction and Demolition Waste Management 7.5 PBT Source Reduction and Furniture Material
8 Chapter 8: Indoor Environmental Quality (EQ)
8.1 EQ Prerequisites 8.2 Enhanced IAQ Strategies and Low-Emitting Materials 8.3 Construction IAQ Management and Assessment 8.4 Thermal Comfort 8.5 Interior Lighting and Daylight 8.6 Quality Views and Acoustic Performance
9 Chapter 9: Innovation, Regional Priority & Project Types
9.1 Innovation Credits 9.2 Regional Priority Credits 9.3 BD+C Project Types and Scope 9.4 Project Registration, Documentation, and Certification Process 9.5 Last-Minute Exam Tips
4.2 Site Assessment and Site Development
Key Takeaways Explain This Topic AI
SS Credit: Site Assessment is worth 1 point and requires documenting topography, hydrology, climate, vegetation, soils, human use, and human health effects before schematic design completes.
The Site Assessment must influence design decisions — documenting findings without applying them to the project does not earn the credit.
SS Credit: Site Development — Protect or Restore Habitat is worth 1–2 points and offers two compliance paths: on-site restoration or financial support to a land trust.
On-site Option 1 requires native or adapted vegetation on a minimum of 30% of the vegetated and non-roof area for greenfield sites (and 30% of the total site area, including the building footprint, for previously developed sites) for 1 point; 2 points require restoring 40% of the total site area.
Option 2 requires financial support of at least $0.40 per square foot of total site area to a nationally or locally recognized land trust within the same EPA Level III Ecoregion.
Last updated: May 2026
Once the Construction Activity prerequisite is locked in, the SS category rewards teams for knowing the site before they design and then acting on that knowledge. Sections 4.2 covers the first two SS credits: Site Assessment and Site Development — Protect or Restore Habitat .
- SS Credit: Site Assessment (1 point)
- Intent
To assess site conditions before design to evaluate sustainable options and inform related decisions about site design. In plain language: don't draw the building first and then discover the wetland.
What the Assessment Must Cover
LEED requires the team to assess and document seven categories of site conditions. Each must include findings, an interpretation, and how the design responds to them. A line-item table without a design-response column will not earn the point.
- # Category Examples of What to Document
- 1 Topography Contours, slopes, drainage divides, unique landforms
- 2 Hydrology Floodplain delineation, wetlands, water bodies, stormwater patterns, FEMA flood zones
- 3 Climate Solar exposure, prevailing winds, heat island context, microclimates
- 4 Vegetation Primary plant communities, invasive species, threatened species, tree inventory
- 5 Soils NRCS soil survey data, prime/unique soils, contamination, infiltration capacity
- 6 Human use Adjacent land uses, transportation, viewsheds, cultural resources
- 7 Human health effects Demographic vulnerability, access to nature, daylight access, exposure to pollutants
- Timing Requirement
The assessment must be performed during the predesign or schematic design phase and must measurably influence the project. Documenting a wetland and then paving it does not satisfy the credit.
- Documentation
- Site assessment narrative
- Annotated site plan or GIS overlay
- Statement of how each category influenced the design
- SS Credit: Site Development — Protect or Restore Habitat (1–2 points)
This credit shifts focus from understanding the site to taking action on it. The intent is to conserve existing natural areas and restore damaged areas to provide habitat and promote biodiversity.
Option 1: On-Site Restoration
Use native or adapted plants — species that occur naturally in the region or are well-suited without irrigation — to restore site area damaged by previous development or to retain undisturbed habitat. The percentage threshold depends on whether the site is greenfield or previously developed.
- Site Type Restoration Area Required Points
- Greenfield (previously undisturbed) Preserve 40% of greenfield area on the site 1
Previously developed site Use native/adapted vegetation on 30% of the total site area (including the building footprint) 1
All sites — enhanced threshold Restore 40% of the total site area using native/adapted vegetation 2
The phrase "vegetated and non-roof area" in older references applies to projects where the building footprint is excluded from the calculation; the v4 standard uses total site area including the footprint for previously developed sites. Always confirm against the latest LEED v4.1 reference guide.
What Counts as "Native or Adapted"?
Native plants — species that occur naturally in the region (state plant atlas or regional native plant society lists)
Adapted plants — non-invasive species that perform well in the local climate with minimal supplemental water, fertilizer, or pest control after establishment
- Invasive species are explicitly excluded and may not be counted
- Vegetated Roofs
A vegetated (green) roof may count toward Option 1 only when planted with native or adapted vegetation. If the green roof is needed to meet this credit, it must also be designed to support habitat — a thin sedum mat with no biodiversity value typically does not qualify on its own.
Option 2: Financial Support
Projects that cannot meet Option 1 on the site itself may provide financial support of at least $0.40 per square foot of total site area to a nationally or locally recognized land trust or conservation organization. Conditions:
- The land trust must be accredited by the Land Trust Accreditation Commission or a recognized equivalent
- The conserved land must lie within the same EPA Level III Ecoregion as the project
- A signed letter of intent and proof of payment are required
- This option earns 1 point — it does not stack to 2 points by itself
- Calculation Example
A 50,000 sq ft total-site-area project pursuing Option 2 must contribute:
50,000 × $0.40 = $20,000 to a qualifying land trust.
Common Exam Traps
Site Assessment is 1 point , not a prerequisite. Many candidates confuse it with the prerequisite — it is not.
The assessment must influence design , not just describe the site.
Site Development — Protect or Restore Habitat is worth up to 2 points ; Option 2 alone caps at 1 point.
Financial support is calculated on total site area at $0.40/sq ft , not on building floor area.
Turfgrass lawn is rarely native or adapted in most regions and typically does not count toward the restoration percentage.