Study guide
1.4 Scoring, Results, Retakes, and Maintenance
LEED Green Associate Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: Current Exam Format, v5 Transition, and Study Model
1.1 Current Credential Purpose and Owner 1.2 Registration, Fees, Delivery, and Appointment Planning 1.3 Exam Format, Cognitive Levels, and Closed-Book Conditions 1.4 Scoring, Results, Retakes, and Maintenance 1.5 v4/v5 Transition Dates and Exam Version Choice 1.6 Domain Specifications and Study Model
2 LEED Process: Certification Workflow and Rating System Structure
2.1 USGBC, GBCI, and Official Process Sources 2.2 Rating System Selection and Structure 2.3 Prerequisites, Credits, Points, and Certification Levels 2.4 Registration, Submittal, Review, and Results Workflow 2.5 Addenda, Interpretations, and Current Policy Control 2.6 Documentation Mindset and Process Scenario Reasoning
3 Integrative Process Planning, Assessments, and Team Collaboration
3.1 Early Assessment and Integrative Mindset 3.2 Systems Thinking and Cross-Credit Synergies 3.3 Charrettes and Team Collaboration 3.4 OPR and BOD Concepts 3.5 Life-Cycle Cost Thinking and Prioritization 3.6 Decision Sequencing and Exam Scenarios
4 Location, Transportation, Site Selection, and Equitable Access
4.1 Sensitive Land Avoidance and Existing Infrastructure 4.2 Compact Development and Diverse Uses 4.3 Transit Access, Bicycle Facilities, and Human-Powered Trips 4.4 Parking Demand and Alternative Fuel Vehicles 4.5 VMT, Emissions, and Location Tradeoffs 4.6 Equitable Access and Scenario Reasoning
5 Sustainable Sites: Resilience, Rainwater, Heat Island, and Light
5.1 Site Assessment and Disturbance Boundaries 5.2 Habitat, Open Space, and Ecosystem Services 5.3 Construction Pollution Prevention and Erosion Controls 5.4 Rainwater Management and Site Hydrology 5.5 Heat Island Reduction and Light Pollution Control 5.6 Resilience, Synergies, and Exam Scenario Reasoning
6 Water Efficiency: Indoor, Outdoor, Process Water, and Metering
6.1 Water Efficiency Domain and Water Budget Thinking 6.2 Outdoor Water Use, Irrigation, and Planting Strategy 6.3 Indoor Water Use, Fixtures, and Occupant Demand 6.4 Process Water, Cooling Towers, and Equipment 6.5 Nonpotable Sources, Water Quality, and Leak Detection 6.6 Metering, Submetering, and Cross-Category Water Strategy
7 Energy and Atmosphere: Loads, Efficiency, Renewables, and Performance
Building Loads, Envelope, and Passive Design HVAC Efficiency, Controls, and Operations Energy Modeling, Performance, and Metering Commissioning and Ongoing Verification Renewable Energy, RECs, and Demand Response Refrigerants, Decarbonization, and Grid Context
8 Materials and Resources: Life Cycle, Embodied Carbon, Products, and Waste
Life-Cycle Thinking and Material Strategy Embodied Carbon, Reuse, and Low-Impact Selection EPDs, Product Disclosure, and Sourcing Signals Material Ingredients, VOCs, and Health Context Construction Waste Planning and Diversion Operations Waste, Recycling, and Purchasing Habits
9 Indoor Environmental Quality: Air, Light, Sound, Comfort, and Inclusion
9.1 IAQ, Ventilation, and Filtration Foundations 9.2 Low-Emitting Materials and Source Control 9.3 Construction IAQ and Occupancy Readiness 9.4 Daylight, Electric Lighting, and Views 9.5 Acoustics, Thermal Comfort, and Occupant Controls 9.6 Accessibility, Biophilia, and Inclusive IEQ
10 Project Surroundings, Public Outreach, and Sustainable Value
10.1 Domain Frame and v5 Transition 10.2 Regional Priority and Local Context 10.3 Innovation and the LEED AP Role 10.4 Social Equity, Public Health, and Community Value 10.5 Triple Bottom Line and Sustainable Value 10.6 Public Outreach, Documentation, and Exam Reasoning
11 Cross-Category Scenarios, Synergies, Tradeoffs, and Exam Reasoning
11.1 Mapping Mixed-Domain Scenarios 11.2 Synergy Chains Across Domains 11.3 Tradeoffs and Best-Action Judgment 11.4 Green-Sounding Distractors 11.5 v4/v5 Terminology Bridges 11.6 Scenario Drills and Review Debriefs
12 Timed Practice, Final Review, Maintenance, and Next Credentials
12.1 Two-Hour Test Strategy 12.2 Flag and Review Workflow 12.3 Beta, Final Results, and Remediation 12.4 Final Seven-Day Review 12.5 Credential Maintenance and CMP 12.6 Next Credentials and Study Continuity
1.4 Scoring, Results, Retakes, and Maintenance
Key Takeaways Explain This Topic AI
Scores are reported on a scaled range of 125-200, and 170 or higher passes.
The 170 passing score is a scaled score and must not be converted into a raw percentage of correct answers.
Final exams display a pass/fail result on screen at the end; beta exam results are delayed until item analysis is complete.
LEED Green Associates must earn 15 continuing education hours every 2 years, including at least 3 LEED-specific hours, under the CMP.
Last updated: June 2026
Score facts without score myths
LEED Green Associate scores are reported on a scaled range of 125 to 200 , and 170 or higher passes . The single most important guardrail here is that 170 is a scaled score, not a percentage of correct answers . Scaled scoring (an equating model) adjusts for small differences in form difficulty so that every candidate faces an equivalent bar. Because of that, you cannot say 'I need to get X out of 100 right.' Any prep source claiming 'you need about 85%' or 'roughly 60 of 100 correct' is inventing a conversion that GBCI does not publish. Memorize the two numbers — 125-200 and 170 — and stop there.
- Topic Fact or guardrail
- Scaled range 125-200
- Passing scaled score 170
- Raw-percentage claim Not published; do not convert
- Final exam result timing On-screen pass/fail at exam end
- Beta exam result timing Delayed until item analysis is complete
- CMP maintenance 15 CE hours / 2 years, incl. 3 LEED-specific
- Result timing
For a final (live) exam , your unofficial pass/fail appears on screen immediately when you finish, and GBCI processes the official credential update afterward; a numeric scaled score follows in your USGBC account. For a beta exam , results are delayed until GBCI completes item analysis — often weeks — because the whole purpose of beta is to gather performance data before scoring is finalized. This is a reporting consequence, not a sign that beta exams are harder or easier. If you sit the v5 beta in 2026, do not expect an instant result.
Retake policy
Every attempt is paid. You may retest after a brief interval, but three unsuccessful attempts within 12 months trigger a 90-calendar-day waiting period before you may register and pay again. Treat retakes as risk management, not a free improvement: diagnose which domains failed you, rebuild 120-minute endurance, and only re-pay once the gaps are closed. Nothing in the policy promises that simply retesting raises your score.
Credential maintenance (CMP)
Earning the credential is not the finish line. Under the Credentialing Maintenance Program (CMP) , a LEED Green Associate must earn 15 continuing education (CE) hours every 2 years, including at least 3 LEED-specific hours (the remaining 12 may be general or LEED-specific). A renewal fee applies at reporting. You do not need to master CMP before testing, but recognize that maintenance is part of the candidate agreement and the credential's life cycle. Use this checklist:
Memorize the scaled range 125-200 and the passing score of 170.
Refuse to convert the scaled score into a raw percentage.
Expect on-screen results for final exams and delayed results for beta exams.
Treat each attempt as a paid attempt and respect the 90-day cooldown after three fails in 12 months.
Plan to log 15 CE hours (3 LEED-specific) every two years once credentialed.
The smartest practice goal is not a promised score; it is a repeatable pattern: finish 100 one-best-answer items inside 120 minutes, explain every miss, and shrink repeated errors in official facts and domain reasoning. That respects the published model without inventing pass rates.
Understanding scaled scoring with a concrete illustration
Scaled scoring exists because no two exam forms are exactly equal in difficulty. Imagine two candidates: one draws a slightly harder form and answers 78 raw items correctly; another draws a slightly easier form and answers 80 correctly. Equating may convert both to a scaled 172 — both pass — because the model corrects for the form difference. This is precisely why a fixed raw-percentage cutoff cannot be published: the raw count needed varies by form. Your job is to study so thoroughly that you clear the bar comfortably regardless of which form you draw, rather than aiming at a phantom percentage.
The CMP timeline after you pass
- CMP requirement Detail
- Reporting period Every 2 years from the credential date
- Total CE hours 15
- LEED-specific hours At least 3 of the 15
- Remaining hours 12, general or LEED-specific
- Renewal fee Paid at reporting (separate from exam fee)
CE hours come from approved education — USGBC courses, conference sessions, and many third-party providers that map activities to LEED CMP categories. You log them in your USGBC account. Letting the credential lapse means re-establishing it, so candidates often front-load a few LEED-specific hours early in each cycle rather than scrambling at the deadline.
A failed-attempt diagnosis routine
If an attempt does not pass, resist re-booking immediately. Instead: (1) review your domain-level performance feedback and identify the two weakest categories; (2) rebuild those topics from the official references, not from memory; (3) take at least two fresh full-length 120-minute practice exams scoring above your target before re-paying; and (4) confirm you are not still mixing v4 and v5 facts, a frequent cause of avoidable misses during the 2026 transition. Only then schedule the paid retake — and remember the 90-day cooldown looms after a third failure within 12 months.