Study guide

2.1 License Classes & Restrictions Under 230 CMR 6.10

Massachusetts Crane Operator Hoisting Engineer License

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Massachusetts Hoisting Law (MGL Chapter 146)

1.1 MGL Chapter 146 §§ 53–54A: The Hoisting License Mandate, Exemptions & Penalties 1.2 MGL Chapter 146 §§ 57–67: Applications, Examinations, Appeals, License Term & Renewal

2 Chapter 2: Licensing Under 230 CMR 6.00

2.1 License Classes & Restrictions Under 230 CMR 6.10 2.2 Applying, Medical Qualification, the OPSI Exam & Renewal (230 CMR 6.02) 2.3 Temporary Permits, Continuing Education, Apprentices & Company Exemptions (230 CMR 6.03–6.07)

3 Chapter 3: 230 CMR 6.00 Definitions, Operating Rules & Enforcement

3.1 230 CMR 6.01: Scope, Key Definitions, Exempt Equipment & Adopted Standards 3.2 Operating Procedures Under 230 CMR 6.08: Inspections, Attention, Signals & Stop Authority 3.3 Special Requirements Under 230 CMR 6.09: Cranes, Derricks, Pile Drivers, Forklifts & Excavators 3.4 Incident Reporting, Investigations, Discipline & Variances (230 CMR 6.11–6.13)

4 Chapter 4: Crane Types, Working Parts & Load Charts

4.1 Crane Types & Working Parts by Restriction: Lattice, Derrick, Tower, Telescopic & Hydraulic Machines 4.2 Load Chart Fundamentals: Structural Strength vs. Stability Limits 4.3 Capacity Deductions & Calculating Net Allowable Capacity 4.4 Quadrants of Operation, Working Radius & Boom Angle Dynamics

5 Chapter 5: Advanced Lift Calculations & Multi-Crane Operations

5.1 Boom Deflection, Ground Leveling & Side-Loading Hazards 5.2 Wire Rope Reeving, Parts of Line & Single-Line Pull Limits 5.3 Center of Gravity, Weight Distribution & Multi-Crane (Tandem) Lifts

6 Chapter 6: Dig Safe, Underground Utilities & Trench Safety

6.1 Massachusetts Dig Safe Law (MGL c. 82 §§ 40–40E, 220 CMR 99.00): Premarking & Notice 6.2 Utility Color Codes, the 18-Inch Safety Zone, Excavating Near Facilities & Damage Response 6.3 Trench Safety Law, Excavation Hazards, Setbacks & Utility-Strike Emergencies

7 Chapter 7: Power Lines, Ground Conditions & Weather

7.1 Power Line Safety: OSHA 1926.1408–1411, Table A & Table T 7.2 Ground Bearing Pressure, Outrigger Setup & Cribbing Sizing 7.3 Wind, Storms, Lightning, Ice & Cold: Weather Limits for Crane Work

8 Chapter 8: Rigging Principles, Slings & Hardware

8.1 Sling Types: Synthetic, Wire Rope, and Alloy Steel Chain Slings 8.2 Sling Angle Calculations & Tension Formulas 8.3 Rigging Hardware, Shackles, Hooks & Below-the-Hook Lifting Devices

9 Chapter 9: Wire Rope & Crane Inspection

9.1 Wire Rope Construction, Damage Assessment & Removal Criteria (OSHA 1926.1413) 9.2 Crane Inspections, Safety Devices & Operational Aids (230 CMR 6.08; OSHA 1926.1412, 1415, 1416)

10 Chapter 10: Hand Signals & Personnel Hoisting

10.1 Standard Hand Signals, Voice & Radio Signals and Signal Person Qualification 10.2 Crane-Suspended Personnel Platforms (230 CMR 6.09(6) & OSHA 29 CFR 1926.1431)

2.1 License Classes & Restrictions Under 230 CMR 6.10

Key Takeaways Explain This Topic AI

230 CMR 6.10 sorts hoisting licenses into Class 1 (Hoisting), Class 2 (Excavating), Class 3 (Electric and Pneumatic) and Class 4 (Specialty), plus apprentice and state/municipal-limited licenses.

A 1A license covers all friction clutch machines, all derricks including tower cranes, lattice boom machinery, and everything in 1B, 1C, 1D, 4B, 4C, 4D, 4E, 4F and 4G.

A 1B license covers all equipment with a telescoping boom and wire rope plus 1C, 1D, 4B, 4C, 4E and 4F, but not 4D concrete pumps or 4G side boom mowers.

A 1C license covers hydraulic telescoping booms and other hydraulic hoisting equipment without wire rope hoist lines, plus 1D warehouse forklifts.

The state/municipal-limited license (HEML) lets state or municipal public works employees operate 1C, 2B and 4G equipment only within the scope of that employment.

Last updated: October 2026

Restrictions, classes and why they matter

OPSI calls each license grade a restriction . The application fee is $75 per restriction , each restriction is a separate exam, and a license must carry at least one restriction. Dropping a restriction means re-taking that exam to get it back. Operating equipment outside the restrictions held is "practicing beyond the scope of the license," a ground for discipline under 230 CMR 6.12(1)(l).

Class 1: Hoisting

Restriction Prerequisites (beyond 230 CMR 6.02) May operate

1A Knowledge of the crane operator ASME hand signals ; able to read and comprehend load charts and manufacturer's specifications All friction clutch machines and all derricks , including tower cranes, guy derricks, stiff legs, Chicago booms and gin poles ; lattice boom machinery ; and all equipment in 1B, 1C, 1D, 4B, 4C, 4D, 4E, 4F and 4G

1B Knowledge of the crane operator hand signals; load charts and manufacturer's specifications All equipment having a telescoping boom and wire rope ; and all equipment in 1C, 1D, 4B, 4C, 4E and 4F

1C Load charts and manufacturer's specifications Equipment with hydraulic telescoping booms and any other hydraulic equipment designed for hoisting, excluding those with wire rope hoist lines ; and all equipment in 1D

1D 230 CMR 6.02 only General industrial warehouse fork lift equipment primarily used in indoor facilities

The application form labels the boxes in plain terms: 1A "Derricks / Lattice Cranes," 1B "Telescoping Boom w/cables cranes," 1C "Telescoping booms w/o cables, forklifts," 1D "General industrial warehouse Fork Lift equipment."

The wire rope test

The question that separates 1B from 1C is whether the machine has a wire rope hoist line :

A hydraulic truck crane or rough-terrain crane that lifts with a winch and wire rope is 1B .

A boom truck with a winch and wire rope hoist line is 1B .

A hydraulic telescopic machine that lifts without a wire rope hoist line, such as a typical telehandler with forks, is 1C .

A lattice boom crane or any derrick or tower crane is 1A , whatever its size.

Important

1B includes Class 4 specialty work only for 4B, 4C, 4E and 4F . A 1B licensee may not run a 4D concrete pump or a 4G side boom mower unless that person also holds 4D or 4G, or holds 1A, which includes all seven Class 4 restrictions.

Class 2: Excavating

Restriction Prerequisites May operate

2A Knowledge of hand signals for crawler/excavator operations All crawler and rubber-tired excavators and backhoes with manufacturer-approved attachments; equipment in 2B, 2C and 2D

  • 2B 230 CMR 6.02 Combination loader/backhoe machines with approved attachments; equipment in 2C and 2D
  • 2C 230 CMR 6.02 Front-end loaders with approved attachments; equipment in 2D

2D 230 CMR 6.02 Compact hoisting machinery with a gross vehicle weight not exceeding 10,000 pounds , excluding Class 1, 3 and 4 machinery, with approved attachments

Excavator hand signals come from SAE J1307 , reproduced as Appendix B of 230 CMR 6.00. The excavating classes do not include any Class 1 crane restriction, and Class 1 restrictions do not include excavators. A candidate who runs both a boom truck and an excavator needs both a Class 1 and a Class 2 restriction.

Class 3: Electric and Pneumatic

Restriction Prerequisites May operate

3A Able to read and comprehend manufacturer's specifications Overhead gantry cranes , marine lifts , jib cranes with no load charts , and electric or air-driven "tugger" hoists

Class 3 is separate from Class 1. A 1A license does not include 3A.

Class 4: Specialty

  • Restriction Equipment Also covered by
  • 4A Eliminated in 2016 —
  • 4B Drill rigs and pile drivers (including crawler rock drills and top hammer drill rigs) 1A, 1B
  • 4C Pipeline side booms 1A, 1B
  • 4D Concrete pumps 1A only
  • 4E Catch basin cleaner 1A, 1B
  • 4F Sign hanging equipment lifting loads less than 1,000 pounds (½ ton) 1A, 1B
  • 4G Specialty side boom mower 1A only (also HEML)
  • Other license types

HA – Hoisting Apprentice. Issued to an unlicensed person who is at least 16 and registered as an apprentice with the state apprenticeship authority (the Division of Apprentice Standards). The apprentice may operate only under the direct guidance and supervision of a licensed person who is not an apprentice , is exempt from the exam, and holds a license valid for up to two years (Section 2.3).

HEML – State/Municipal Limited. For operators employed by a state or municipal public works department . It allows equipment normally covered by 1C, 2B and 4G , solely within the scope of that state or municipal employment . It does not authorize private-sector work.

Decision practice

  • Machine on the job Minimum restriction
  • 150-ton lattice boom crawler crane 1A
  • Hammerhead tower crane 1A
  • 60-ton hydraulic all-terrain crane lifting on wire rope 1B
  • Boom truck with winch and wire rope 1B
  • Rough-terrain telehandler with forks, no winch 1C
  • Hydraulic knuckle-boom loader crane without a wire rope hoist line 1C
  • Indoor warehouse sit-down forklift 1D
  • Truck-mounted concrete boom pump 4D (or 1A)
  • Overhead gantry crane in a fabrication shop 3A
  • Pile driver on a foundation job 4B (or 1A/1B)
  • 8,500-lb GVW mini excavator 2D (or any higher Class 2)

Loading diagram... Which Class 1 restriction does a crane need?