Study guide

11.1 Official Exam Blueprint, Logistics & Code-Edition Check

Massachusetts Journeyman Electrician Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Electrical Theory, Mathematics & Safety

1.1 Ohm's Law, Watt's Law & Circuit Mathematics 1.2 Alternating Current Theory, Reactance, Impedance & Power Factor 1.3 Electrical Safety, Deenergization & Test-Instrument Selection

2 Chapter 2: General Code Rules, Wiring Design & Protection

2.1 NEC Architecture, Article 90 & Article 100 Definitions 2.2 Branch Circuit Ratings, Sizing & Multiwire Branch Circuits 2.3 GFCI, AFCI & Tamper-Resistant Protection 2.4 Feeders & Outside Branch Circuits

3 Chapter 3: Electrical Services & Overcurrent Protection

3.1 Service Conductors, Drops, Laterals & Clearances 3.2 Service Equipment, Disconnecting Means & Massachusetts Dwelling Rules 3.3 Overcurrent Protection & Standard Fuse/Breaker Ratings 3.4 Feeder and Transformer Tap Rules

4 Chapter 4: Grounding and Bonding

4.1 Grounding Electrode System & Permitted Electrodes 4.2 Grounding Electrode Conductor (GEC) Sizing & Installation 4.3 Equipment Grounding Conductors & Bonding Jumpers 4.4 Bonding of Metal Water Piping, Gas Piping & Structural Steel

5 Chapter 5: Wiring Methods, Raceways, Boxes & Enclosures

5.1 Conductor Properties, Ampacity & Adjustment Factors 5.2 Cable Assemblies: NM, NMC, MC, AC & UF 5.3 Raceways: EMT, RMC, IMC, PVC & Flexible Conduits 5.4 Conduit Fill & Box Fill Calculations

6 Chapter 6: Equipment for General Use: Motors, Transformers & Generators

6.1 Motors: Full-Load Current, Conductor Sizing & Overload Protection 6.2 Motor Branch Circuit Short-Circuit and Ground-Fault Protection 6.3 Transformers & Generator Installations

7 Chapter 7: Special Occupancies, Equipment & Conditions

7.1 Hazardous (Classified) Locations 7.2 Healthcare Facilities & Patient Care Spaces 7.3 Swimming Pools, Spas, Fountains & Water Bodies 7.4 Emergency Systems, Legally Required & Optional Standby

8 Chapter 8: Load Calculations & Applied Practical Problems

8.1 Dwelling Unit Service Calculations: Standard Method 8.2 Dwelling Unit Service Calculations: Optional Method 8.3 Voltage Drop & Feeder Neutral Sizing Calculations

9 Chapter 9: Applied Field Skills: Schematics, Testing & Troubleshooting

9.1 Electrical Schematics, Blueprint Reading & Symbols 9.2 Testing Instruments, Meter Safety & Field Troubleshooting

10 Chapter 10: Massachusetts Electrical Code & State Regulations

10.1 Massachusetts Electrical Code, Amendments & Exam Transition 10.2 Massachusetts Licensing, Supervision, Practice & Continuing Education

11 Chapter 11: Official Blueprint, Logistics & Core Systems

11.1 Official Exam Blueprint, Logistics & Code-Edition Check 11.2 Low-Voltage Distribution: Class 1, Class 2, Class 3 & Communications 11.3 Lighting Systems, Controls & Luminaires 11.4 Fire Alarm & Signaling Systems 11.5 Solar Photovoltaic Systems 11.6 Battery & Energy Storage Systems

11.1 Official Exam Blueprint, Logistics & Code-Edition Check

Key Takeaways Explain This Topic AI

The Massachusetts Journeyman examination has two independently scored parts: Part I has 80 questions and 180 minutes; Part II has 30 questions and 60 minutes.

The passing score is 70% on each part, which means 56 correct answers on Part I and 21 on Part II; the scores are not averaged together.

The official outline has thirteen Part I subjects and six Part II subjects, totaling 110 questions across nineteen blueprint topics.

Both parts are open-book, but only approved references and annotations are allowed; loose inserted material, answers, worked solution steps, and wiring diagrams are prohibited.

The enforced state code is 2026 NEC-based, but the Board said examination changes should be reflected by November 2026, so the PSI authorization must control the edition brought to a transition-period appointment.

Last updated: September 2026

11.1 Official Exam Blueprint, Logistics & Code-Edition Check

Quick Answer: Expect 110 questions in two stand-alone parts. Part I has 80 questions in 180 minutes and requires 56 correct . Part II has 30 questions in 60 minutes and requires 21 correct . Both are open-book. Massachusetts currently enforces a 2026 NEC-based code, while the Board said the exam change should appear by November 2026; verify the edition in the current PSI authorization.

1. Exact Examination Structure

  • Part Questions Time Passing result
  • Part I — Trade 80 180 minutes 70% = 56 correct
  • Part II — Applied 30 60 minutes 70% = 21 correct
  • Total testing 110 240 minutes Each part must pass separately

A 90% Part I score cannot offset a 60% Part II score. The candidate retakes only the failed part while the passed result and application approval remain valid. Both parts must be completed successfully within the 12-month approval period.

The average pace is 2 minutes 15 seconds per Part I item and 2 minutes per Part II item. Code lookups can consume that quickly. A productive strategy is to answer known items first, mark uncertain lookups, and reserve time to review calculations and ensure every response is recorded.

2. Official Part I Outline

  • Subject Items
  • General Knowledge 8
  • Services 11
  • Grounding and Bonding 7
  • Wiring Methods and Devices 18
  • Motors 4
  • Transformers 1
  • Low-Voltage Distribution 2
  • Special Occupancies and Equipment 5
  • Overcurrent Protection 6
  • Lighting 2
  • Alarm Systems 6
  • Solar 6
  • Battery Storage 4
  • Part I total 80

Wiring Methods and Devices is the largest domain, followed by Services. The systems domains are not optional: alarms, solar, and battery storage together contribute 16 questions, one fifth of Part I.

3. Official Part II Outline

  • Subject Items
  • Circuit Calculations (Ohm's Law) 5
  • Electrical Schematics and Plans 5
  • Materials and Components 5
  • Troubleshooting and Testing 6
  • Massachusetts Amendments 5
  • Licensing Laws and Regulations 4
  • Part II total 30

Part II rewards field reasoning. For a calculation, write the formula and units before inserting numbers. For a plan, start with the legend, one-line, schedule, and notes. For troubleshooting, identify the expected reading before measuring. For state-law questions, choose the correct statute or 237 CMR chapter before scanning.

4. Open-Book Rules

The Board policy permits only approved references. The candidate bulletin lists the NEC edition, Massachusetts amendments, relevant M.G.L. and 237 CMR material, NFPA 72, and other references applicable to a license part. The exact list can change.

Permitted preparation includes tabs, highlighting, underlining, handwritten notes in the margins, and formulas on blank pages as the policy allows. Prohibited material includes loose inserted pages, copied publisher content, answers, step-by-step worked calculations, wiring configurations, and drawings beyond symbols used in formulas. Only PSI-provided scratch paper is used during the test.

Build a navigation system, not a miniature answer key. Tab Article numbers and state-regulation subjects, practice the index, and know whether the Massachusetts amendment deletes, revises, or inserts text.

5. Code Transition

Massachusetts adopted 527 CMR 12.00 based on the 2026 NEC effective April 24, 2026. The CIB says new items may be added seven months after a code, regulation, or law becomes enforceable. The Board's May 18, 2026 minutes say exam changes should be reflected by November.

Those statements mean the legal installation code and the tested reference can differ during a transition. They do not guarantee which edition a particular September or November appointment uses. PSI says it maintains the most current application and examination information. Check the authorization letter, current bulletin, PSI portal, and Board notices shortly before the appointment.

6. Eligibility, Fees, and Reexamination

The current Board application page requires a Journeyman candidate to document:

  • 600 hours of Board-approved education;
  • a 15-hour Code Update class;
  • 8,000 work hours over at least four years under a licensed Massachusetts Journeyman;

the education, experience, identity, and other documentation required by 237 CMR 13.

Current application and examination fees total $226 : $60 PSI processing, $80 Part I administration, $55 Part II administration, and $31 Massachusetts processing. The state fee is waived for the military categories named by the state page. The license fee after passing is separate.

A failed candidate must wait at least 24 clock hours to reschedule. After three unsuccessful attempts, 237 CMR 14 requires proof of reviewing deficiencies with a Board-approved provider, an examination-preparation course, or a Board-approved 15-hour continuing-education course if not previously taken. After six unsuccessful attempts, the full applicable initial education must be repeated. If the exam basis changes after a failure, code-update education may also be required.

7. Day-of-Test Method

Arrive with the identification and references specified by PSI. Use the on-screen flag feature intentionally. On calculation questions, estimate the answer's magnitude before selecting an option. On code questions, read the parent text, exceptions, and Massachusetts change. On law questions, distinguish an individual license from a business license.

The last check before submitting is mechanical: no blank responses, units are correct, line-to-line versus line-to-neutral voltage is correct, continuous-load multipliers are not applied twice without a rule, and every state-code answer uses the tested edition.