Study guide
6.3 Concrete & Masonry
Massachusetts General Contractor Construction Supervisor License
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Massachusetts Licensing System
1.1 Exam Facts & Format at a Glance 1.2 CSL vs. HIC vs. "General Contractor License": Getting the Terminology Right 1.3 License Categories: Unrestricted, Restricted, and Specialty CSL 1.4 Eligibility, Experience Credit & the Application Process
2 Chapter 2: Exam Strategy & Test-Day Logistics
Mastering the Open-Book Exam: Tabbing & Reference Strategy Exam Day at PSI: Rules, Materials & What to Expect
3 Chapter 3: Administrative Law & Code Enforcement
3.1 BBRS Authority, 780 CMR & Building Code Administration 3.2 Permits, Inspections & Local Building Departments 3.3 License Renewal & Continuing Education Requirements 3.4 Violations, Penalties & Board Disciplinary Actions
4 Chapter 4: Business Law & Consumer Protection
4.1 Home Improvement Contractor Law (MGL c. 142A) 4.2 Construction Contracts: Types, Terms & Required Provisions 4.3 Massachusetts Mechanics Lien Law (MGL c. 254) 4.4 Payment Practices, Change Orders & Public Bidding
5 Chapter 5: Business Operations & Financial Management
5.1 Business Entities, Insurance & Workers' Compensation 5.2 Project Planning, Scheduling & Delivery Methods 5.3 Plan Reading & Cost Estimating 5.4 Construction Accounting, Taxes, Payment Management & Project Closeout
6 Chapter 6: General Building Construction & Sitework
6.1 Building Basics: MA Amendments to IBC/IRC (780 CMR, 10th Edition) 6.2 Sitework & Foundations 6.3 Concrete & Masonry 6.4 Structural Framing: Wood & Steel, Including Decks
7 Chapter 7: Building Envelope Systems
7.1 Roofing Systems 7.2 Exterior Walls & Cladding 7.3 Windows & Doors 7.4 Moisture Intrusion & Protection
8 Chapter 8: Interior, Mechanical & Fire Protection Systems
8.1 Interior Environment & Ventilation 8.2 Fire Protection Systems 8.3 Finishes & Coordinating Associated Trades
9 Chapter 9: Energy Code & Accessibility
9.1 Energy Efficiency & the Massachusetts Energy Code (225 CMR / IECC) 9.2 Accessibility Requirements (521 CMR)
10 Chapter 10: Safety & Lead-Safe Practices
10.1 OSHA Construction Safety Requirements (29 CFR 1926) 10.2 Fire Codes & Environmental Regulations 10.3 Lead-Safe Renovation Requirements
11 Chapter 11: After You Pass: Career Path & Final Review
11.1 Specialty License Upgrades, Career Paths & Related Credentials 11.2 Final Review: Common Exam Traps & Last-Mile Prep Checklist
6.3 Concrete & Masonry
Key Takeaways Explain This Topic AI
Concrete is a mix of cement (the binder), aggregate (sand/stone), and water, which chemically hydrates rather than simply drying.
Concrete is strong in compression but weak in tension and flexure, which is why steel reinforcement (rebar) is embedded in members that will be stressed in tension.
Concrete gains strength gradually after placement through curing; strength gain is fastest in the first several days and continues over an extended period, commonly benchmarked around 28 days.
Masonry units (brick, block, stone) are bonded together with mortar, a distinct mix from concrete formulated for joint bond and workability.
Structural masonry carries building loads; masonry veneer is a non-load-bearing facing attached to a separate structural backup wall -- confusing the two is a common, consequential error.
Last updated: July 2026
What Is Concrete? Composition Basics
Concrete is a manufactured building material made by combining three basic ingredients: cement (typically portland cement, the binder), aggregate (sand and crushed stone or gravel, which provide bulk and most of the finished volume), and water (which chemically reacts with the cement in a process called hydration, not simple drying). The ratio of these ingredients, along with any admixtures added for workability, air entrainment (important for freeze-thaw durability in Massachusetts's climate), or set time, determines the final properties of the hardened concrete.
It is worth being precise about terminology here because the exam will test it directly: concrete is not the same thing as cement (cement is one ingredient within concrete), and concrete is not the same thing as mortar (mortar, discussed below, is a different mix used to bond masonry units rather than to form structural mass).
Why Concrete Needs Reinforcement: Compression vs. Tension
Plain, unreinforced concrete has a very useful but very lopsided structural personality: it is strong in compression (being squeezed or crushed) but comparatively weak in tension (being pulled or stretched) and in resisting bending (flexure), which produces both compression on one face of a member and tension on the opposite face. A concrete element loaded only in pure compression can perform well unreinforced; almost nothing in real construction loads concrete that way.
This is why reinforcement , most commonly steel reinforcing bar ( rebar ), is embedded within concrete members. Steel is strong in tension, so placing rebar in the zones of a concrete member that will be stressed in tension allows the composite material -- reinforced concrete -- to resist both compression (handled by the concrete) and tension (handled by the steel) as a single working system. A concrete footing, foundation wall, or slab expected to span, cantilever, or resist bending is a strong candidate for reinforcement; a purely compression-loaded element may not require it to the same degree. Recognizing which situation you are looking at, and recognizing that concrete and reinforced concrete are not interchangeable terms, is a recurring exam theme.
Curing: How Concrete Gains Strength Over Time
Concrete does not achieve its design strength the moment it is placed and finishes setting. Curing is the process of maintaining adequate moisture and temperature in freshly placed concrete so the hydration reaction between cement and water can continue and the material can keep gaining strength. Concrete allowed to dry out too quickly, or exposed to freezing temperatures before it has gained adequate strength, will not reach its intended design strength and may be permanently weakened or damaged.
Strength development in concrete follows a predictable curve: strength gain is most rapid in the first several days after placement and continues, at a slowing rate, for an extended period afterward, which is why the concrete industry commonly benchmarks design strength at a standard age (widely referenced as 28 days after placement) rather than at the moment of initial set. The practical implication for a contractor is timing-related: concrete should not be loaded, backfilled against, or built upon before it has gained sufficient strength for that specific use, and cold-weather placement in Massachusetts requires additional protective measures (such as insulating blankets or heated enclosures) to keep curing concrete from freezing before it has developed adequate strength.
Masonry Construction Basics: Units, Mortar, and Joints
Masonry construction assembles individual units -- brick, concrete masonry units (block, or CMU), or stone -- into a wall or other element, bonded together with mortar . Mortar is a distinct mix from concrete: it typically combines cement (or a cement-lime blend), sand, and water, formulated for workability and bond strength at a joint rather than for mass structural strength. The mortar joints between units are not merely a gap-filler; joint quality, thickness, and tooling directly affect the wall's structural performance and its resistance to water penetration.
- Masonry Concept What It Means
- Masonry unit The individual brick, block, or stone that makes up the wall
- Mortar joint The bonding layer between units; governs both structural bond and water resistance
- Wythe A continuous vertical section of masonry one unit thick
Structural masonry Masonry designed and detailed to carry building loads (its own weight plus loads transferred to it)
Masonry veneer A non-structural facing of masonry units attached to and supported by a separate structural backup wall (wood frame, steel frame, or CMU backup); it carries only its own weight, not building loads
Structural Masonry vs. Masonry Veneer
This distinction is one of the most commonly tested, and most commonly confused, concepts in the masonry portion of the exam. Structural masonry is engineered and detailed to be part of the building's load path: it carries loads from floors, roofs, or walls above, in addition to its own weight, similar in role to a load-bearing wall discussed in Section 6.1. Masonry veneer , by contrast, is an aesthetic and protective facing -- brick veneer on a wood-framed house is the most common Massachusetts example -- attached to a separate structural wall behind it and not designed to carry building loads. Treating a veneer wall as if it were structurally load-bearing, or vice versa, is exactly the kind of error the exam is designed to catch, because it has serious real-world safety and code-compliance consequences.