Study guide
2.1 Label Parts, Registration Numbers, and Signal Words
Massachusetts Pesticide Applicator Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: State Laws & Regulations (333 CMR 10.00)
1.1 Pesticide Licensing & Credentials (Applicator, Private, Commercial, Dealer) 1.2 Recertification, CE Credits, and ePLACE Portal 1.3 School, Daycare, and Child Care IPM Laws 1.4 Federal vs. State Jurisdictions (FIFRA, MDAR, EPA) 1.5 Recordkeeping & Reporting Requirements (333 CMR 10.14) 1.6 License Suspension, Revocation, Hearings & Financial Responsibility
2 Chapter 2: Label Compliance & Interpretation
2.1 Label Parts, Registration Numbers, and Signal Words 2.2 Directions for Use, Safety Instructions, and Restricted Entry Intervals (REI) 2.3 Safety Data Sheets (SDS) and OSHA Hazard Communication 2.4 Label Law Enforcement, Inspections & Penalties
3 Chapter 3: Pesticide Safety & PPE
3.1 Toxicity & Exposure Routes 3.2 Personal Protective Equipment (PPE) & Respirator Fit Testing 3.3 First Aid, Decontamination, and Worker Protection Standard (WPS) 3.4 Emergency Response (Spills, Fires, and Cholinesterase Monitoring)
4 Chapter 4: Environmental Protection
4.1 Pesticide Movement (Runoff, Leaching, Volatilization) & Drift Management 4.2 Groundwater, Surface Water, and Endangered Species Protection 4.3 Storage, Transport, and Disposal Regulations 4.4 Pollinator and Bee Protection
5 Chapter 5: Application Methods & Calibration
Section 5.1: Formulations, Compatibility, and Mixing/Loading Safety Section 5.2: Application Equipment, Nozzles, and Maintenance Section 5.3: Calibration Calculations and Application Rates (GPA formula) Section 5.4: Integrated Pest Management (IPM) & Resistance Management
2.1 Label Parts, Registration Numbers, and Signal Words
Key Takeaways Explain This Topic AI
Pesticide labels are legally binding documents approved by the EPA under FIFRA; using a product in a manner inconsistent with its label is a federal and state offense.
The active ingredient's common name is the standard chemical identifier that allows applicators to recognize the active chemical across different commercial brand names.
The EPA Registration Number (EPA Reg. No.) uniquely identifies the specific pesticide product and registrant, while the EPA Establishment Number (EPA Est. No.) tracks the manufacturing facility.
Signal words represent the acute toxicity category of the pesticide: DANGER-POISON (highly toxic), DANGER (severe eye/skin irritant), WARNING (moderately toxic), and CAUTION (slightly or practically non-toxic).
Last updated: July 2026
- Label Parts, Registration Numbers, and Signal Words
- The Pesticide Label as a Regulatory Standard
A pesticide label is far more than a simple product instruction sheet or a marketing brochure. It is a highly regulated, legally binding document approved by the U.S. Environmental Protection Agency (EPA) under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). Before a manufacturer can sell a pesticide in the United States, they must submit extensive scientific data demonstrating that the product will perform its intended function without causing unreasonable adverse effects on human health or the environment. The label is the official summary of these findings, translating complex laboratory data and field trials into clear instructions for safe and effective use. Under federal law and Massachusetts state regulations (specifically 333 CMR 10.00 ), using any registered pesticide in a manner inconsistent with its labeling is a violation of the law.
Core Components of the Pesticide Label
Understanding how to read and interpret every section of a pesticide label is the first and most critical step in pesticide safety. Every label contains standard components designed to provide specific information:
Brand or Trade Name : This is the commercial name created by the manufacturer for marketing purposes (e.g., "Roundup," "Temprid FX," or "Daconil"). The brand name is prominent on the front panel of the packaging. Applicators must not rely solely on the brand name, as different manufacturers may sell the exact same chemical under various trade names, or a single brand name may be reformatted to contain completely different active ingredients over time.
Common Name : The common name is the officially recognized, simplified name of the active chemical compound (e.g., glyphosate , imidacloprid , or chlorothalonil ). These names are standardized by independent scientific organizations, such as the American National Standards Institute (ANSI), to prevent confusion. Because brand names vary, looking for the common name is the only reliable way to identify what active chemical you are applying.
Chemical Name : This is the complex technical name describing the chemical structure of the active ingredient according to systematic chemical nomenclature rules (e.g., 1-(6-chloro-3-pyridylmethyl)-N-nitroimidazolidin-2-ylideneamine for imidacloprid). While essential for medical professionals and researchers, it is rarely used in routine application work.
Ingredient Statement : This statement is a legally mandated table on the front of the label that lists the percentage of each active ingredient and the total percentage of inert ingredients by weight. The active ingredient is the chemical that actually controls the pest. Inert ingredients (such as solvents, surfactants, propellants, or carriers) do not target the pest directly but are added to improve product performance, stability, mixing, or ease of application.
Net Contents : Indicates the total weight (for dry formulations) or volume (for liquid formulations) of the pesticide in the container.
Name and Address of Manufacturer/Registrant : Lists the contact details of the registrant responsible for the product.
EPA Numbers: Registration vs. Establishment
Every registered pesticide container carries two distinct identification numbers that are vital for regulatory compliance, product tracking, and emergency response.
EPA Registration Number (EPA Reg. No.) : This number is proof that the product has been registered with the federal government and approved for sale.
Standard Two-Part Number : A typical registration number consists of two sets of digits separated by a hyphen (e.g., 12345-67 ). The first set ( 12345 ) represents the manufacturer or registrant ID. The second set ( 67 ) represents the specific product registration code assigned by the EPA.
Distributor (Three-Part) Number : When a product is manufactured by one company but sold by another distributor under a separate trade name, it carries a three-part registration number (e.g., 12345-67-8910 ). The third set of numbers ( 8910 ) represents the distributor’s unique company ID. This is known as a distributor registration or sub-registration.
EPA Establishment Number (EPA Est. No.) : This number identifies the specific manufacturing facility or packaging plant where that particular batch of pesticide was produced (e.g., 12345-MA-001 ). The letters in the middle represent the state abbreviation (such as MA for Massachusetts) where the facility is located. If a batch of pesticide is contaminated, formulated incorrectly, or subject to a recall, regulatory agencies use the establishment number to trace the product back to its source factory.
Toxicity Categories and Signal Words
Pesticide products are grouped into four acute toxicity categories based on laboratory tests of oral, dermal, and inhalation exposure, as well as eye and skin irritation. The EPA requires a specific signal word to be displayed prominently on the front of the label to communicate this level of hazard to the applicator. Signal words reflect acute toxicity (the hazard from a single short-term exposure) and do not indicate chronic toxicity (long-term effects like cancer or reproductive issues).
Toxicity Category Signal Word Toxicity Level Oral LD50 (mg/kg) Estimated Lethal Dose for 150lb Adult Hazard Description
Category I (Highly Toxic) DANGER-POISON High systemic toxicity 0 to 50 A few drops to 1 teaspoon Can be fatal if swallowed, absorbed through the skin, or inhaled. Must display the skull and crossbones symbol (usually in red).
Category I (Corrosive) DANGER Severe tissue damage N/A (corrosive) N/A Corrosive; causes irreversible eye damage or severe skin burns, though systemic oral toxicity may be low.
Category II WARNING Moderate toxicity 50 to 500 1 teaspoon to 2 tablespoons (approx. 1 ounce) Harmful or fatal if swallowed; causes moderate skin or eye irritation.
Category III CAUTION Slight toxicity 500 to 5,000 1 ounce to 1 pint Harmful if swallowed or absorbed; causes mild skin or eye irritation.
Category IV CAUTION (optional) Low toxicity Greater than 5,000 Greater than 1 pint Practically non-toxic; minimal or no skin/eye irritation.
The signal word DANGER-POISON must always be accompanied by the word POISON and the Skull and Crossbones symbol. This represents severe systemic hazard. If the product is classified as Category I due to its corrosive physical properties (such as blindness or skin chemical burns) rather than systemic poisoning, it will carry the word DANGER alone, without the skull and crossbones or the word POISON.
Precautionary and Hazard Statements
Labels contain precautionary statements that advise the applicator on how to minimize risks to humans, animals, and the environment:
Hazards to Humans and Domestic Animals : This section warns of specific bodily hazards (e.g., "causes eye irritation," "harmful if absorbed through skin"), details required medical monitoring, and identifies the routes of entry that are most dangerous.
Environmental Hazards : This section warns of off-target environmental damage. It includes warnings about pesticide runoff, water contamination (e.g., "do not apply directly to water"), and hazards to non-target wildlife (e.g., "highly toxic to bees," "toxic to fish").
Physical or Chemical Hazards : Highlights hazards such as flammability, explosive reactions, or chemical incompatibilities (e.g., "do not store near heat or open flame," "corrosive to aluminum").