Study guide
11.3 Test-Day Checklist: Pearson VUE, PRONTO, and Retake Rules
Master Electrician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Master Exam Orientation and Source Control
1.1 ICC R16, T16, G16, and Jurisdiction Variance 1.2 Current Format, Cost, Time, and Passing Score 1.3 Master License Scope vs. Exam Provider 1.4 Official References, Open-Book Rules, and Calculators 1.5 Domain Weights and Master-Level Study Map 1.6 Using the Practice Bank, Error Log, and Code Index
2 Chapter 2: Master-Level Electrical Theory, Plans, and Calculations
2.1 Plan Reading, Specifications, and Supervisory Review 2.2 Ohms Law, Power Factor, and Three-Phase Review 2.3 Fault Current, Available Fault Current, and Equipment Ratings 2.4 Demand Loads, Continuous Loads, and Calculation Setup 2.5 Voltage Drop and Design Judgment 2.6 Coordination, Selectivity, and Master-Level Decision-Making 2.7 Theory, Plans, and Calculation Case Lab
3 Chapter 3: Services, Service Equipment, and Main Distribution
3.1 Service Point, Service Conductors, and Utility Boundaries 3.2 Service Load Calculations and Demand-Factor Workflow 3.3 Service Disconnects, Overcurrent Protection, and Grouping 3.4 Service Equipment Ratings, Clearances, and Working Space 3.5 Transformers and Separately Derived System Decisions 3.6 Temporary Services and Construction Power 3.7 Services and Main Distribution Case Lab
4 Chapter 4: Grounding, Bonding, and Fault-Current Paths
4.1 Grounding vs. Bonding and Exam Language 4.2 Grounding Electrode Systems and Grounding Electrode Conductors 4.3 Main Bonding Jumpers, System Bonding, and Equipment Bonding 4.4 Separately Derived Systems Grounding and Bonding 4.5 Fault-Current Paths, Clearing Time, and Equipment Ratings 4.6 Special Bonding Patterns: Pools, Services, and Metal Systems 4.7 Grounding and Bonding Case Lab
5 Chapter 5: Feeders, Branch Circuits, and Conductor Engineering
5.1 Feeder vs. Branch Boundaries and Load Flow 5.2 Conductor Ampacity, Temperature Ratings, and Terminal Limits 5.3 Adjustment, Correction, and Neutral Counting 5.4 Overcurrent Protection, Tap Conductors, and Next-Size Rules 5.5 Required Outlets, GFCI/AFCI, and Occupancy Patterns 5.6 Multiwire Branch Circuits, Shared Neutrals, and Voltage Drop 5.7 Feeders, Branch Circuits, and Conductor Case Lab
6 Chapter 6: Wiring Methods, Raceways, Box Fill, and Installation Judgment
6.1 Raceway Selection and Installation Conditions 6.2 Raceway Fill, Conductor Protection, and Bending Limits 6.3 Boxes, Enclosures, and Conduit Bodies 6.4 Box Fill: Device Yokes, Equipment Grounds, and Clamps 6.5 Underground, Wet, Corrosive, and Physical-Damage Locations 6.6 Cabinets, Panelboards, Switchboards, and Working Clearance 6.7 Wiring Methods Installation Case Lab
7 Chapter 7: Equipment, Devices, Controls, and Utilization Equipment
7.1 Luminaires, Receptacles, Switches, and Device Placement 7.2 Appliances, Utilization Equipment, and Nameplate Data 7.3 Heating, Cooling, and HVAC Equipment Branch-Circuit Decisions 7.4 Disconnects, Switches, Controllers, and Control-Circuit Logic 7.5 Panelboards, Switchboards, Cabinets, and Equipment Labeling 7.6 Working Space, Accessibility, and Maintenance Judgment 7.7 Equipment, Devices, and Controls Case Lab
8 Chapter 8: Motors, Generators, Transformers, and Power Systems
8.1 Motor Loads, Full-Load Current, and Nameplate Boundaries 8.2 Motor Conductors, Overloads, and Short-Circuit/Ground-Fault Protection 8.3 Motor Controllers, Disconnects, and Group Installations 8.4 Generators, Transfer Equipment, and Optional Standby Systems 8.5 Emergency, Legally Required, and Critical Power Distinctions 8.6 Transformer Primary, Secondary, and Grounding Decisions 8.7 Motors, Generators, and Power Systems Case Lab
9 Chapter 9: Special Occupancies, Emergency Systems, and Safety
9.1 Hazardous Classified Locations and Boundary Thinking 9.2 Healthcare, Places of Assembly, and Commercial Special Rules 9.3 Pools, Spas, Marinas, and Corrosive/Wet Environments 9.4 RV Parks, Mobile Homes, Data Centers, and Special Equipment 9.5 Emergency Systems, Signaling, and Fire Alarm Interfaces 9.6 OSHA Electrical Safety, Lockout, and Field Risk Control 9.7 Special Occupancies and Safety Case Lab
10 Chapter 10: Master Electrician Integrated Code and Calculation Labs
10.1 Residential Service Upgrade Integrated Lab 10.2 Small Commercial Tenant Improvement Integrated Lab 10.3 Motor Shop and Industrial Equipment Integrated Lab 10.4 Mixed-Occupancy Special Condition Integrated Lab 10.5 Generator, Transfer, and Emergency Load Integrated Lab 10.6 Plan Review, Redline, and Supervisory Correction Lab 10.7 Five-Hour Open-Book Simulation Strategy
11 Chapter 11: Final Review, Test Day, Licensing, and Business Next Steps
11.1 Final 30-Day Master Electrician Review Plan 11.2 Reference Tab, Index, and Open-Book Speed Drills 11.3 Test-Day Checklist: Pearson VUE, PRONTO, and Retake Rules 11.4 After the Score: Jurisdiction Application and License Next Steps 11.5 Business, Supervision, Permit, and Compliance Readiness 11.6 Master Electrician Final Mixed Review
11.3 Test-Day Checklist: Pearson VUE, PRONTO, and Retake Rules
Key Takeaways Explain This Topic AI
ICC contractor and trades exams are administered through Pearson VUE, and candidates should confirm the current delivery rules before the appointment.
R16-N and T16-N are open-book, 100-question, 5-hour exams in the current bulletin, with four-option multiple-choice questions and no guessing penalty.
Electronic results are generally available immediately, but a passing result does not by itself create a license unless the jurisdiction says so.
The ICC bulletin states a 10-day retake wait after a failed exam unless the licensing board says otherwise.
Test-day execution should include arrival, ID, materials, calculator, timing checkpoints, answer-every-question discipline, and post-score record handling.
Last updated: May 2026
Treat test day like a controlled job start
A master electrician candidate should approach test day the same way a responsible supervisor approaches an energized shutdown, service change, or inspection-critical rough-in. The technical work matters, but the job can fail before the first calculation if the setup is wrong. Your setup includes appointment details, identification, reference materials, calculator, travel time, testing rules, timing plan, and the jurisdiction's post-score process.
ICC contractor and trades exams are administered through Pearson VUE. Some candidates may encounter PRONTO or other remote-proctored options depending on the current program and exam availability, but the safe rule is to confirm the delivery method and rules from the current ICC bulletin, Pearson VUE appointment information, and jurisdiction instructions before the appointment. Do not assume that a testing rule from a coworker, old forum post, or prior exam still applies.
For R16-N and T16-N, the source brief identifies a 100-question, open-book, 5-hour exam with a $120 Pearson VUE fee in the current bulletin. The questions are four-option multiple choice with one correct answer. There is no guessing penalty. Those facts create two nonnegotiable behaviors: answer every question and manage time against 300 minutes. A blank answer has no upside. A slow lookup that prevents you from seeing ten later questions is a bad trade even if the lookup eventually proves one answer.
Build a day-before checklist:
- Item Verification
- Appointment Date, time, delivery method, location or remote setup
- Identification Names match appointment requirements and IDs are current
- References Correct exam edition, bound books, permanent tabs, no loose papers
Calculator Battery-operated, nonprogrammable, no stored exam information, PRONTO basic four-function if applicable
- Jurisdiction Application number, score-submission instructions, retake rule caveat
- Timing Three-pass plan and checkpoint targets written into scratch routine if allowed
For an in-person Pearson VUE appointment, plan arrival with a margin. Traffic, parking, check-in, locker procedures, and reference inspection can consume time and attention. For a remote option such as PRONTO where available, check equipment, internet, camera, room conditions, calculator rule, and reference handling before the test window. A remote proctoring failure is not an electrical knowledge problem, but it can still derail the attempt.
Once the exam begins, run the timing plan. In the first pass, answer direct recognition questions and quick lookups. If you know that a dwelling small-appliance branch-circuit rule lives in Article 210, go there and answer. If a service calculation requires several steps and you do not immediately see the path, mark a provisional answer if possible, flag it, and move on. In the second pass, attack flagged questions where you know the route. In the final pass, eliminate impossible options, use broad NEC structure, and make sure every question has an answer.
Use the reference book with restraint. The question stem usually tells you whether it wants a definition, a general installation rule, a table value, a calculation, a special occupancy modification, or a supervision judgment. If the question includes a specific equipment type, occupancy, voltage, conductor material, insulation, continuous load, or location condition, underline those facts mentally before opening the book. Many wrong answers come from finding a true rule that does not apply to the exact condition in the stem.
Electronic results are generally available immediately. A passing candidate is typically told PASS and may not receive a numerical score. A failing result may provide diagnostic information depending on the program, but the brief does not support inventing a universal report format. Save or record the result exactly as instructed by ICC, Pearson VUE, and the jurisdiction. Some boards receive scores directly. Others require the applicant to upload proof, complete an application, or satisfy experience and business requirements.
Retake rules matter if the result is not passing. The ICC bulletin states a failed exam retake wait of 10 days unless the licensing board says otherwise. That caveat is important. A local board can impose a different rule or additional process. After a failed attempt, do not immediately rebook without reading the score information, updating the miss log, and checking whether the jurisdiction limits attempts or requires additional waiting. Ten days is enough time for focused repair, not enough time for vague rereading.
A pass is not the end of the licensing process unless the jurisdiction explicitly says it is. ICC provides exam information to licensing agencies, but the state, county, city, or board decides whether the score satisfies a requirement and what else is needed. The safest post-score action is to follow the jurisdiction packet in order: submit score proof if required, complete application steps, pay fees, document experience, provide bond or insurance if required, and wait for license issuance before advertising or performing work that requires the license.
The test-day mindset should be calm but disciplined. You do not need to know every answer from memory. You do need to know when to look, where to look, when to stop, and when to move. You need to protect against avoidable losses: wrong book, prohibited material, dead calculator, late arrival, blank answers, changing answers without evidence, and assuming the score automatically changes your legal authority to work. Those controls are as master-level as any calculation.