Study guide
1.2 Current Format, Cost, Time, and Passing Score
Master Electrician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Master Exam Orientation and Source Control
1.1 ICC R16, T16, G16, and Jurisdiction Variance 1.2 Current Format, Cost, Time, and Passing Score 1.3 Master License Scope vs. Exam Provider 1.4 Official References, Open-Book Rules, and Calculators 1.5 Domain Weights and Master-Level Study Map 1.6 Using the Practice Bank, Error Log, and Code Index
2 Chapter 2: Master-Level Electrical Theory, Plans, and Calculations
2.1 Plan Reading, Specifications, and Supervisory Review 2.2 Ohms Law, Power Factor, and Three-Phase Review 2.3 Fault Current, Available Fault Current, and Equipment Ratings 2.4 Demand Loads, Continuous Loads, and Calculation Setup 2.5 Voltage Drop and Design Judgment 2.6 Coordination, Selectivity, and Master-Level Decision-Making 2.7 Theory, Plans, and Calculation Case Lab
3 Chapter 3: Services, Service Equipment, and Main Distribution
3.1 Service Point, Service Conductors, and Utility Boundaries 3.2 Service Load Calculations and Demand-Factor Workflow 3.3 Service Disconnects, Overcurrent Protection, and Grouping 3.4 Service Equipment Ratings, Clearances, and Working Space 3.5 Transformers and Separately Derived System Decisions 3.6 Temporary Services and Construction Power 3.7 Services and Main Distribution Case Lab
4 Chapter 4: Grounding, Bonding, and Fault-Current Paths
4.1 Grounding vs. Bonding and Exam Language 4.2 Grounding Electrode Systems and Grounding Electrode Conductors 4.3 Main Bonding Jumpers, System Bonding, and Equipment Bonding 4.4 Separately Derived Systems Grounding and Bonding 4.5 Fault-Current Paths, Clearing Time, and Equipment Ratings 4.6 Special Bonding Patterns: Pools, Services, and Metal Systems 4.7 Grounding and Bonding Case Lab
5 Chapter 5: Feeders, Branch Circuits, and Conductor Engineering
5.1 Feeder vs. Branch Boundaries and Load Flow 5.2 Conductor Ampacity, Temperature Ratings, and Terminal Limits 5.3 Adjustment, Correction, and Neutral Counting 5.4 Overcurrent Protection, Tap Conductors, and Next-Size Rules 5.5 Required Outlets, GFCI/AFCI, and Occupancy Patterns 5.6 Multiwire Branch Circuits, Shared Neutrals, and Voltage Drop 5.7 Feeders, Branch Circuits, and Conductor Case Lab
6 Chapter 6: Wiring Methods, Raceways, Box Fill, and Installation Judgment
6.1 Raceway Selection and Installation Conditions 6.2 Raceway Fill, Conductor Protection, and Bending Limits 6.3 Boxes, Enclosures, and Conduit Bodies 6.4 Box Fill: Device Yokes, Equipment Grounds, and Clamps 6.5 Underground, Wet, Corrosive, and Physical-Damage Locations 6.6 Cabinets, Panelboards, Switchboards, and Working Clearance 6.7 Wiring Methods Installation Case Lab
7 Chapter 7: Equipment, Devices, Controls, and Utilization Equipment
7.1 Luminaires, Receptacles, Switches, and Device Placement 7.2 Appliances, Utilization Equipment, and Nameplate Data 7.3 Heating, Cooling, and HVAC Equipment Branch-Circuit Decisions 7.4 Disconnects, Switches, Controllers, and Control-Circuit Logic 7.5 Panelboards, Switchboards, Cabinets, and Equipment Labeling 7.6 Working Space, Accessibility, and Maintenance Judgment 7.7 Equipment, Devices, and Controls Case Lab
8 Chapter 8: Motors, Generators, Transformers, and Power Systems
8.1 Motor Loads, Full-Load Current, and Nameplate Boundaries 8.2 Motor Conductors, Overloads, and Short-Circuit/Ground-Fault Protection 8.3 Motor Controllers, Disconnects, and Group Installations 8.4 Generators, Transfer Equipment, and Optional Standby Systems 8.5 Emergency, Legally Required, and Critical Power Distinctions 8.6 Transformer Primary, Secondary, and Grounding Decisions 8.7 Motors, Generators, and Power Systems Case Lab
9 Chapter 9: Special Occupancies, Emergency Systems, and Safety
9.1 Hazardous Classified Locations and Boundary Thinking 9.2 Healthcare, Places of Assembly, and Commercial Special Rules 9.3 Pools, Spas, Marinas, and Corrosive/Wet Environments 9.4 RV Parks, Mobile Homes, Data Centers, and Special Equipment 9.5 Emergency Systems, Signaling, and Fire Alarm Interfaces 9.6 OSHA Electrical Safety, Lockout, and Field Risk Control 9.7 Special Occupancies and Safety Case Lab
10 Chapter 10: Master Electrician Integrated Code and Calculation Labs
10.1 Residential Service Upgrade Integrated Lab 10.2 Small Commercial Tenant Improvement Integrated Lab 10.3 Motor Shop and Industrial Equipment Integrated Lab 10.4 Mixed-Occupancy Special Condition Integrated Lab 10.5 Generator, Transfer, and Emergency Load Integrated Lab 10.6 Plan Review, Redline, and Supervisory Correction Lab 10.7 Five-Hour Open-Book Simulation Strategy
11 Chapter 11: Final Review, Test Day, Licensing, and Business Next Steps
11.1 Final 30-Day Master Electrician Review Plan 11.2 Reference Tab, Index, and Open-Book Speed Drills 11.3 Test-Day Checklist: Pearson VUE, PRONTO, and Retake Rules 11.4 After the Score: Jurisdiction Application and License Next Steps 11.5 Business, Supervision, Permit, and Compliance Readiness 11.6 Master Electrician Final Mixed Review
1.2 Current Format, Cost, Time, and Passing Score
Key Takeaways Explain This Topic AI
R16-N and T16-N are listed as 100-question, open-book, Pearson VUE exams with a 5-hour limit and a $120 Pearson VUE fee in the current bulletin.
ICC contractor and trades questions are four-option multiple-choice questions with one correct answer and no guessing penalty.
The Master Electrician passing score guidance is 75%, not the general 70% contractor/trades rule used for many other exams.
Passing candidates generally receive PASS rather than a numerical score, so practice analytics must be built before test day.
The 5-hour format gives about 3 minutes per question, but lookup-heavy questions require a triage plan.
Last updated: May 2026
Format facts that shape strategy
For the current ICC national master electrician contractor exams, the logistics are direct but important. R16-N and T16-N are listed as 100 multiple-choice questions, open book, administered through Pearson VUE, with a 5-hour time limit. The current bulletin lists the Pearson VUE fee for each as $120. The source brief flags G16-N as listed on the current national exam list as a 2017 NEC master exam, but candidates using G16 must confirm the current bulletin and jurisdiction instructions because older-cycle exams may be treated differently by local boards.
The question format is four options with one correct answer. There is no penalty for guessing, so unanswered questions are self-inflicted losses. A master candidate should never run out of time with blanks. If you cannot solve a question after a controlled attempt, mark the best answer, flag it if the delivery system allows, and move on. The exam rewards correct answers, not proof that you found every citation.
The passing score deserves special attention. ICC guidance says contractor and trades exams generally require 70% correct, but Master Electrician requires 75%. Do not import a journeyman rule into a master exam plan. On a 100-question exam, a 75% target means 75 correct answers if the exam is scored as raw percentage. Your practice target should be higher than that because test day adds fatigue, unfamiliar wording, navigation delay, and occasional topics that are not represented well in your practice bank.
Passing candidates are generally told PASS and do not receive a numerical score. That means the diagnostic work must be done during study. Build your own score history by domain, reference article, time spent, and error type. If your final week practice says 82% overall but 52% on services and service equipment, the overall number is hiding a licensing risk. A master candidate needs enough margin across the heavy domains to survive a lopsided form.
Five hours for 100 questions sounds generous until you convert it to behavior. It averages 3 minutes per question. Some direct recognition questions take 30 seconds. A service calculation, motor conductor question, box fill problem, or special occupancy search can consume 6 to 10 minutes if you wander. Your strategy is not to spend exactly 3 minutes on every item. Your strategy is to bank time on familiar questions and spend the bank only on questions that justify it.
Use a three-pass timing model. Pass 1 is fast confidence: answer direct knowledge, obvious article-navigation, and simple table questions. Do not open a long calculation unless you see the path. Pass 2 is controlled lookup: return to flagged questions where a known article, table, or index route should solve the problem. Pass 3 is damage control: use elimination, jurisdiction-neutral code principles, and your best remaining lookup opportunities. In practice, train this as 100 questions in 300 minutes, with checkpoints at question 25, 50, and 75.
A useful checkpoint table looks like this:
- Time elapsed Minimum progress Action if behind
- 75 minutes 25 questions seen Stop deep lookups and clear easier items
- 150 minutes 50 questions seen Shift from perfect proof to controlled answers
- 225 minutes 75 questions seen Reserve final hour for flagged high-value items
- 285 minutes All questions answered Fill every blank and review only changed-risk items
Do not over-review correct instincts. Many candidates lose points by changing a correct first answer after rereading an option under fatigue. Change an answer only when you found a controlling reference, discovered a calculation error, or realized you answered a different question than the one asked. Vague discomfort is not evidence.
Retake friction also belongs in orientation. The ICC bulletin indicates a failed exam retake wait of 10 days unless the licensing board says otherwise. That delay may affect job bids, license renewals, business openings, or local application windows. It is not just an inconvenience. Build a schedule that allows a full practice exam, domain repair, reference tab audit, and rest before the first attempt.
The cost number is small compared with lost time, but it still matters. A $120 Pearson VUE fee does not include code books, tabs, local application fees, travel, or missed work. Treat the fee as a reminder to test your process before paying for the seat. If you have never completed a 100-question open-book practice set with the same references, timing rules, calculator, and mark-and-return discipline, you have not rehearsed the actual event.
The logistics are not trivia. They determine the study architecture. A 100-question, 5-hour, open-book, 75% master exam is a reference-navigation and judgment exam under time pressure. The candidate who understands the format can build a plan. The candidate who only knows the NEC may still lose points to time, scoring assumptions, and source confusion.