Study guide

1.4 Official References, Open-Book Rules, and Calculators

Master Electrician Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Master Exam Orientation and Source Control

1.1 ICC R16, T16, G16, and Jurisdiction Variance 1.2 Current Format, Cost, Time, and Passing Score 1.3 Master License Scope vs. Exam Provider 1.4 Official References, Open-Book Rules, and Calculators 1.5 Domain Weights and Master-Level Study Map 1.6 Using the Practice Bank, Error Log, and Code Index

2 Chapter 2: Master-Level Electrical Theory, Plans, and Calculations

2.1 Plan Reading, Specifications, and Supervisory Review 2.2 Ohms Law, Power Factor, and Three-Phase Review 2.3 Fault Current, Available Fault Current, and Equipment Ratings 2.4 Demand Loads, Continuous Loads, and Calculation Setup 2.5 Voltage Drop and Design Judgment 2.6 Coordination, Selectivity, and Master-Level Decision-Making 2.7 Theory, Plans, and Calculation Case Lab

3 Chapter 3: Services, Service Equipment, and Main Distribution

3.1 Service Point, Service Conductors, and Utility Boundaries 3.2 Service Load Calculations and Demand-Factor Workflow 3.3 Service Disconnects, Overcurrent Protection, and Grouping 3.4 Service Equipment Ratings, Clearances, and Working Space 3.5 Transformers and Separately Derived System Decisions 3.6 Temporary Services and Construction Power 3.7 Services and Main Distribution Case Lab

4 Chapter 4: Grounding, Bonding, and Fault-Current Paths

4.1 Grounding vs. Bonding and Exam Language 4.2 Grounding Electrode Systems and Grounding Electrode Conductors 4.3 Main Bonding Jumpers, System Bonding, and Equipment Bonding 4.4 Separately Derived Systems Grounding and Bonding 4.5 Fault-Current Paths, Clearing Time, and Equipment Ratings 4.6 Special Bonding Patterns: Pools, Services, and Metal Systems 4.7 Grounding and Bonding Case Lab

5 Chapter 5: Feeders, Branch Circuits, and Conductor Engineering

5.1 Feeder vs. Branch Boundaries and Load Flow 5.2 Conductor Ampacity, Temperature Ratings, and Terminal Limits 5.3 Adjustment, Correction, and Neutral Counting 5.4 Overcurrent Protection, Tap Conductors, and Next-Size Rules 5.5 Required Outlets, GFCI/AFCI, and Occupancy Patterns 5.6 Multiwire Branch Circuits, Shared Neutrals, and Voltage Drop 5.7 Feeders, Branch Circuits, and Conductor Case Lab

6 Chapter 6: Wiring Methods, Raceways, Box Fill, and Installation Judgment

6.1 Raceway Selection and Installation Conditions 6.2 Raceway Fill, Conductor Protection, and Bending Limits 6.3 Boxes, Enclosures, and Conduit Bodies 6.4 Box Fill: Device Yokes, Equipment Grounds, and Clamps 6.5 Underground, Wet, Corrosive, and Physical-Damage Locations 6.6 Cabinets, Panelboards, Switchboards, and Working Clearance 6.7 Wiring Methods Installation Case Lab

7 Chapter 7: Equipment, Devices, Controls, and Utilization Equipment

7.1 Luminaires, Receptacles, Switches, and Device Placement 7.2 Appliances, Utilization Equipment, and Nameplate Data 7.3 Heating, Cooling, and HVAC Equipment Branch-Circuit Decisions 7.4 Disconnects, Switches, Controllers, and Control-Circuit Logic 7.5 Panelboards, Switchboards, Cabinets, and Equipment Labeling 7.6 Working Space, Accessibility, and Maintenance Judgment 7.7 Equipment, Devices, and Controls Case Lab

8 Chapter 8: Motors, Generators, Transformers, and Power Systems

8.1 Motor Loads, Full-Load Current, and Nameplate Boundaries 8.2 Motor Conductors, Overloads, and Short-Circuit/Ground-Fault Protection 8.3 Motor Controllers, Disconnects, and Group Installations 8.4 Generators, Transfer Equipment, and Optional Standby Systems 8.5 Emergency, Legally Required, and Critical Power Distinctions 8.6 Transformer Primary, Secondary, and Grounding Decisions 8.7 Motors, Generators, and Power Systems Case Lab

9 Chapter 9: Special Occupancies, Emergency Systems, and Safety

9.1 Hazardous Classified Locations and Boundary Thinking 9.2 Healthcare, Places of Assembly, and Commercial Special Rules 9.3 Pools, Spas, Marinas, and Corrosive/Wet Environments 9.4 RV Parks, Mobile Homes, Data Centers, and Special Equipment 9.5 Emergency Systems, Signaling, and Fire Alarm Interfaces 9.6 OSHA Electrical Safety, Lockout, and Field Risk Control 9.7 Special Occupancies and Safety Case Lab

10 Chapter 10: Master Electrician Integrated Code and Calculation Labs

10.1 Residential Service Upgrade Integrated Lab 10.2 Small Commercial Tenant Improvement Integrated Lab 10.3 Motor Shop and Industrial Equipment Integrated Lab 10.4 Mixed-Occupancy Special Condition Integrated Lab 10.5 Generator, Transfer, and Emergency Load Integrated Lab 10.6 Plan Review, Redline, and Supervisory Correction Lab 10.7 Five-Hour Open-Book Simulation Strategy

11 Chapter 11: Final Review, Test Day, Licensing, and Business Next Steps

11.1 Final 30-Day Master Electrician Review Plan 11.2 Reference Tab, Index, and Open-Book Speed Drills 11.3 Test-Day Checklist: Pearson VUE, PRONTO, and Retake Rules 11.4 After the Score: Jurisdiction Application and License Next Steps 11.5 Business, Supervision, Permit, and Compliance Readiness 11.6 Master Electrician Final Mixed Review

1.4 Official References, Open-Book Rules, and Calculators

Key Takeaways Explain This Topic AI

Open book does not mean unlimited notes; ICC computer-based exams generally restrict materials to approved bound references with allowed ink notes, highlighting, and permanent tabs.

Loose papers are prohibited under the current source brief, so candidates should not build a strategy around removable cheat sheets.

Calculator rules require battery-operated, nonprogrammable calculators that cannot store exam information; PRONTO allows a basic four-function nonprogrammable calculator.

Questions and appeals are based on the listed references, so the exam catalog reference list is the controlling book list.

Reference strategy should emphasize index routes, article maps, table triggers, and repeated lookup drills instead of decorating a book with tabs that are never used.

Last updated: May 2026

Open book is a controlled environment

The ICC master electrician exam is open book, but open book is not the same as open notes. The current source brief states that computer-based exams generally allow copyrighted bound material with ink notes, highlighting, and permanently attached tabs. Loose papers are prohibited. That rule should shape your entire reference strategy. If your study system depends on removable formula sheets, loose article maps, printed practice explanations, or sticky notes that can be detached, you are training with materials you may not be allowed to use.

Start with the official reference list in the exam catalog. The catalog tells you which books and editions support the questions and any appeal. Do not assume your field copy is acceptable just because it is the NEC. The edition must match the exam. R16 is tied to the 2023 NEC and 2021 International Codes, while T16 is tied to the 2020 NEC and 2018 International Codes. If your jurisdiction uses G16, confirm the current listed references. A clean book list prevents both study drift and test-day rejection.

Permitted markings should help navigation, not replace knowledge. Highlight definitions, scope triggers, table titles, exceptions, and calculation steps that you actually use. Ink notes should be brief labels or cross-reference reminders, such as service load calc route, motor branch short-circuit protection, box fill volume path, or classified location wiring method check. A margin note that becomes a private textbook may be challenged depending on test-center interpretation, and it usually slows you down anyway.

Tabs need the same discipline. Permanent tabs are useful only when they support a practiced route. Tab Article 100, 110, 210, 215, 220, 225, 230, 240, 250, 300, 310, 314, 334, 358, 408, 422, 430, 445, 517, 600, 680, 690, 700, 701, 702, and Chapter 9 only if those are part of your exam edition and study route. Do not over-tab every article. Too many tabs turn the book edge into visual noise. The point is not to prove you prepared; it is to reach the controlling rule quickly.

A master lookup has a sequence. First, classify the problem: definition, installation rule, ampacity, overcurrent protection, grounding and bonding, working space, box or raceway fill, motor, generator, special occupancy, or calculation. Second, identify the likely article or chapter. Third, use the article table of contents, section headings, index, or known table number. Fourth, read the rule with the question facts in mind. Fifth, check exceptions, notes, and cross-references only if they are triggered. Wandering through adjacent sections is the enemy.

For example, a question about a feeder conductor is not automatically an Article 215-only question. It may require conductor ampacity in Article 310, overcurrent protection in Article 240, grounding and bonding in Article 250, voltage drop as an informational design issue if referenced, or load calculation in Article 220. A master candidate learns to separate the object of the question from the controlling rule. The phrase feeder tells you the system part, not necessarily the final article.

Calculator rules also deserve rehearsal. The source brief states that the calculator must be battery-operated, nonprogrammable, not capable of storing examination information, and without ribbon or paper printing. PRONTO allows a basic four-function nonprogrammable calculator. Even if you test at Pearson VUE rather than PRONTO, train on a simple compliant calculator. Do not rely on a construction calculator with stored functions unless the current rules clearly allow it. On exam day, the safest calculator is boring, familiar, and accepted.

Practice calculations should be written in the same form you can reproduce under pressure. Use units and intermediate values. For a conductor ampacity question, write: load amps, continuous factor if applicable, terminal temperature limit, conductor insulation column, adjustment or correction, final ampacity, overcurrent rule. For a box fill question, write: conductor count, device yoke count, internal clamp count if applicable, equipment grounding conductor allowance, volume allowance, selected box volume. This is not extra schoolwork. It prevents arithmetic from becoming guesswork.

Reference strategy must include what not to look up. Direct facts, such as no guessing penalty or 100-question format, come from the bulletin and should be memorized. Common code routes should be automatic enough that the book confirms rather than discovers. If you open the NEC for every basic GFCI, working space, conductor color, or box fill concept, the open-book advantage becomes a time penalty.

Before scheduling, perform a reference audit. Confirm the correct editions, remove loose papers, inspect tabs for permanence, check that notes are in ink and within the allowed style, verify the calculator, and practice packing only what the rules allow. Then take a timed practice set using those materials only. The first time you feel the limits of open book should be in practice, not while the exam clock is running.

Structured Decision Aid

Confirm the exact approved reference list for R16, T16, G16, or the state-specific master exam.

Use only bound references, permanent tabs, and allowed notes under the current ICC/Pearson VUE or PRONTO rules.

Practice with the same nonprogrammable calculator style you will bring to the test center or remote session.

Build an index route for definitions, services, grounding, conductors, wiring methods, motors, and special occupancies.