Study guide
2.1 BOM Lines, Line Types, and Component Configurations
Microsoft Dynamics 365 Supply Chain Management Functional Consultant MB-330
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Product Master and Released Products
1.1 Product Masters, Variants, and Configuration Technologies 1.2 Product Templates, Category Hierarchies, and Product Lifecycle States 1.3 Product Attributes, Attribute Types, and Attribute Groups
2 Chapter 2: Bills of Materials (BOM) and Formulas
2.1 BOM Lines, Line Types, and Component Configurations 2.2 BOM Versions, Activation, Approvals, and Circularity Checks 2.3 BOM Calculations, Cost Group Types, Flushing Principles, and Scrap Handling
3 Chapter 3: Product Prerequisites and Dimension Groups
3.1 Product, Storage, and Tracking Dimension Groups 3.2 Item Model Groups, Inventory Models, and Physical/Financial Posting 3.3 Reservation Hierarchies and Unit Sequence Groups
4 Chapter 4: Additional Product Details and Warehouse Fit
4.1 Bar Codes, GTINs, and Product Unit Conversions 4.2 Default Order Settings and Site-Specific Order Settings 4.3 Product Filter Codes and Physical Warehouse Dimensions
5 Chapter 5: Inventory Costing and Pricing
5.1 Costing Versions, Costing Sheets, and Standard Costing 5.2 Base Item Prices, Price Groups, and Price Tolerances 5.3 Trade Agreements, Price/Discount Journals, and Smart Rounding
6 Chapter 6: Inventory Journals and Core Transactions
6.1 Movement, Adjustment, and Transfer Journals 6.2 Counting Journals, Tag Counting, and Cycle Count Adjustments 6.3 Item Arrival Journals, Output Orders, and BOM Journals
7 Chapter 7: Inventory Operations, Blocking, and Closing
7.1 Transfer Orders, In-Transit Warehouses, and Delivery Schedules 7.2 Inventory Blocking Mechanisms, Batch Disposition Codes, and Inventory Status 7.3 Inventory Closing, Recalculation, Settlement, and ABC Classification
8 Chapter 8: Quality Management and Nonconformance
8.1 Quality Control Setup: Tests, Test Groups, and Item Sampling 8.2 Quality Associations, Automatic Generation, and Quality Orders Processing 8.3 Nonconformances, Corrections, Corrective Operations, and Quarantine Orders
9 Chapter 9: Asset Management: Setup and Maintenance
9.1 Assets, Asset Types, and Functional Locations Setup 9.2 Asset Lifecycle Models, Lifecycle States, and Asset Loans 9.3 Work Orders Configuration, Work Order Settings, and Maintenance Capacity Management 9.4 Maintenance Plans, Maintenance Requests, Work Order Scheduling, and Journal Consumption
10 Chapter 10: Procurement and Sourcing Configuration
10.1 Vendors, Vendor Groups, and Procurement Category Hierarchies 10.2 Purchasing Policies, Spending Limits, Procurement Workflows, and Charge Codes 10.3 Purchase Agreements, Vendor Rebates, and Vendor Collaboration Portal
11 Chapter 11: Purchase Order Lifecycle and Consignment
11.1 Purchase Requisitions, Requests for Quotation (RFQs), and Bidding Processes 11.2 Purchase Orders Creation, Over/Under-Delivery Tolerances, Delivery Schedules, and Product Receipt 11.3 Consignment Inventory Replenishment/Ownership Change and Vendor Return Orders
12 Chapter 12: Landed Cost and Inbound Logistics
12.1 Landed Cost Architecture: Voyages, Shipping Containers, Folios, and Journey Templates 12.2 Cost Type Codes, Auto-Costs, and Allocation Methods 12.3 Tracking Control Center, Goods in Transit Orders, and Over/Under Tolerances
13 Chapter 13: Sales Management and Order Processing
13.1 Customers, Customer Groups, Sales Agreements, and Sales Quotations 13.2 Sales Order Processing, Manual and Automatic Reservation, and Sales Returns 13.3 Order Promising: ATP, CTP, Delivery Schedules, and Product Bundles 13.4 Intercompany Trading Chains, Sales Commissions, and Customer Rebates
14 Chapter 14: Warehouse Setup and Core Infrastructure
14.1 Warehouse Topology: Sites, Warehouses, Locations, Profiles, Formats, and Zones 14.2 Work Policies, Work Breaks, and Packing Dimensions 14.3 Wave Templates, Work Templates, and Location Directives Configuration 14.4 Label Layouts, Document Routing, Wave Label Printing, and GS1 Number Sequences
15 Chapter 15: Warehouse Execution Processes
15.1 Inbound Receiving Processes, Planned Cross-Docking, and Putaway 15.2 Outbound Waves, Wave Processing, Picking (Order, Cluster, Batch), and Manual Packing 15.3 Replenishment Strategies (Wave vs. Min/Max) and Inventory Movements via Warehouse Work 15.4 Cycle Counting Plans, Thresholds, Blind Counting, and Automated Containerization
16 Chapter 16: Transportation Management and Logistics
16.1 Shipping Carriers, Carrier Groups, Carrier Services, and Rate/Route Engines 16.2 Route Plans, Route Guides, Inbound/Outbound Loads, and Dock Appointment Scheduling 16.3 Freight Bills, Freight Invoicing, and Manual/Automatic Freight Reconciliation
17 Chapter 17: Warehouse Management Mobile App
17.1 Mobile App Installation, Display Settings, Connection Profiles, and Warehouse Worker Setup 17.2 Mobile Device Menus, Work-Based and Indirect Menu Items, and Inventory Inquiries 17.3 Step Detours Configuration and GS1 Barcode Scanning Implementation
18 Chapter 18: Master Planning and Planning Optimization
18.1 Master Planning Parameters, Coverage Groups, and Planning Optimization Cloud Service Architecture 18.2 Item Coverage Settings, Positive/Negative Days, Time Fences, and Action Messages 18.3 Running Master Planning, Analyzing Results, Planned Orders Firming, and Supply Schedule 18.4 Safety Stock Journals, Safety Margins, and Copilot in Dynamics 365 Supply Chain Management
2.1 BOM Lines, Line Types, and Component Configurations
Key Takeaways Explain This Topic AI
Bills of Materials (BOMs) govern discrete manufacturing by defining structural parent-child relationships, whereas process manufacturing uses formulas with co-products, by-products, and batch balancing.
The five D365 SCM BOM line types (Item, Phantom, Pegged supply, Vendor, and Dimension group) control how Master Planning and production order estimation explode demand and consume inventory.
Phantom BOM lines dissolve intermediate subassembly boundaries during order estimation, injecting child components and route operations directly into the parent production order without generating separate production orders.
Total component consumption combines variable consumption (scaled by order quantity and per-series) with constant consumption, constant scrap, and variable scrap percentage.
BOM lines support dynamic product dimension inheritance (Configuration, Size, Color, Style) and site-specific validity date windows for engineering phase-in and phase-out.
Last updated: September 2026
2.1 BOM Lines, Line Types, and Component Configurations
In Microsoft Dynamics 365 Supply Chain Management (D365 SCM), Bills of Materials (BOMs) form the engineering and operational backbone of discrete manufacturing . A BOM specifies the complete hierarchical structure of raw materials, subassemblies, parts, and packaging required to assemble an end product.
Understanding how BOM headers, BOM versions, and individual BOM lines interact is critical for passing the MB-330 exam and designing robust manufacturing solutions.
1. Discrete Manufacturing Architecture vs. Process and Lean
D365 SCM segregates production methodologies into three distinct operating models based on the Production type field configured on the Engineer FastTab of the Released Product:
Discrete Manufacturing : Governed by Bills of Materials (BOMs) and Routes executed via Production Orders . Items are distinct, countable physical units (such as machinery, electronics, and vehicles) that can be assembled, disassembled, and repaired.
Process Manufacturing : Governed by Formulas and Recipes executed via Batch Orders . Items are blended, mixed, or chemically transformed (such as liquids, bulk solids, paints, and pharmaceuticals). Formulas support ingredient potency, catch-weight handling, variable batch sizing, and the simultaneous creation of co-products and by-products .
Lean Manufacturing : Governed by Production Flows and Kanbans . Material movement and replenishment are pull-driven based on takt time without production work orders.
- Navigation Paths
- BOM Master Maintenance : Product information management > Bills of materials and formulas > Bills of materials
Released Product BOM Lines : Product information management > Products > Released products > Action Pane > Engineer tab > BOM group > Lines
Visual BOM Designer : Product information management > Products > Released products > Action Pane > Engineer tab > BOM group > Designer
The BOM Designer provides an interactive graphical tree view of the finished good. It allows functional consultants and engineers to visually navigate multi-level product structures, drag and drop components across subassembly tiers, align components to routing operations, and analyze operational lead times.
2. BOM Line Types
Each line on a BOM must be assigned one of five Line types , which instructs Master Planning (Planning Optimization) and the production estimation engine how to source, consume, and cost the component:
Line Type Order & Inventory Behavior Master Planning (MRP) Treatment Typical Operational Use Case
Item Deducts stocked inventory from warehouse via picking list. Generates planned purchase, production, or transfer orders. Standard raw materials, purchased hardware, or pre-built stocked subassemblies.
Phantom Dissolves subassembly node during order estimation. Injects child lines into parent order. Never plans orders for the phantom parent; explodes net requirements directly to child lines. Transient engineering subassemblies built on-line but never stocked in inventory.
Pegged supply Directly creates a child production or purchase order linked to parent order. Generates pegged supply orders linked directly via parent lot ID ( InventRefTransId ). Custom made-to-order subassemblies or dedicated parts synchronized to a specific parent run.
Vendor Generates an external subcontract purchase order linked to a routing service operation. Plans subcontract purchase order requirements for outside vendor processing. Subcontracted plating, painting, heat-treating, machining, or vendor-supplied tooling.
Dimension group Dynamically resolves component variant dimensions from parent finished good. Plans specific variant SKU requirements based on inherited dimension parameters. Configurable products where components inherit color, size, style, or configuration from parent.
Operational Deep Dive on Key Line Types
Phantom BOMs : Engineering departments frequently group components into logical subassemblies that are never placed into warehouse inventory. When a production order is estimated, D365 SCM explodes the phantom: the phantom parent item disappears from the production BOM, and its child components and route operations are promoted directly to the parent production order. This eliminates unnecessary reporting as finished, warehouse putaway, and picking transactions.
Pegged Supply : Used when subassembly inventory must not be commingled with general warehouse stock. Estimating the parent order immediately generates a dedicated child production order (for manufactured items) or pegged purchase order (for purchased items). The finished output of the child order is reserved directly for the parent production order upon completion.
Vendor Subcontracting : Configured with an outside service item and vendor account. Estimating the production order generates a linked subcontract purchase order, automating outside processing tracking and cost capitalization.
3. Consumption Calculations and Scrap Handling
D365 SCM provides precise mathematical controls on BOM lines to scale material consumption and account for production waste.
Variable vs. Per-Series (Constant) Consumption
Variable Consumption : Consumption scales proportionally with the order batch size. The formula is: Variable Component Qty = Consumption Quantity × ( Production Order Quantity Per (Series) ) \text{Variable Component Qty} = \text{Consumption Quantity} \times \left( \frac{\text{Production Order Quantity}}{\text{Per (Series)}} \right) Variable Component Qty = Consumption Quantity × ( Per (Series) Production Order Quantity )
Per (Series) : Specifies the base parent unit quantity against which the consumption quantity applies (default is 1 ). If an adhesive requires 250 mL per 50 finished units, enter Consumption = 0.25 L and Per = 50 .
Constant Consumption : Consumed as a fixed quantity for the batch regardless of the order volume. Ideal for machine setup materials, primer coats in dipping vats, or sacrificial calibration test coupons.
Constant vs. Variable Scrap
Material scrap on BOM lines is divided into two distinct parameters:
Constant Scrap : A fixed physical quantity lost during initial machine setup, tooling run-in, or calibration, completely independent of batch size (e.g., 5 feet of steel ruined during lathe chuck alignment).
Variable Scrap : Scrap expressed as a percentage of net consumption that scales linearly with order volume (e.g., 3% metal swarf or cutting waste).
Total Gross Line Consumption Formula Total Gross Consumption = ( Consumption × Order Quantity Per + Constant Scrap ) × ( 1 + Variable Scrap 100 ) \text{Total Gross Consumption} = \left( \text{Consumption} \times \frac{\text{Order Quantity}}{\text{Per}} + \text{Constant Scrap} \right) \times \left( 1 + \frac{\text{Variable Scrap}}{100} \right) Total Gross Consumption = ( Consumption × Per Order Quantity + Constant Scrap ) × ( 1 + 100 Variable Scrap )
Important
Constant scrap is added before the variable scrap percentage is calculated. For example, if an order requires 100 net units, constant scrap is 10 units, and variable scrap is 10%, the total gross demand is ( 100 + 10 ) × 1.10 = 121 (100 + 10) \times 1.10 = 121 ( 100 + 10 ) × 1.10 = 121 units.
4. Product Dimensions and Inheritance on BOM Lines
When producing configurable items (using Product dimension groups: Configuration, Size, Color, and Style):
Fixed Dimensions : The BOM line explicitly hardcodes a specific component variant.
Dimension Inheritance : On the BOM line Setup tab, enabling dimension inheritance allows child components to automatically inherit matching dimensions (such as Color or Size) from the parent finished good during order creation.
Storage and Tracking Dimensions : While BOM lines dictate physical items and product dimensions, storage dimensions (Site, Warehouse, Location) and tracking dimensions (Batch number, Serial number) are determined by the item default order settings and warehouse reservation hierarchies.
5. Site-Specific BOMs and Validity Dates
Multisite BOM Architecture : A BOM Header can be assigned to a specific Site , or left blank to serve as a shared template across all corporate facilities. If assigned to a site, all component lines must consume inventory from that site.
Line Validity Dates (From date / To date) : Individual lines feature effectivity dates. This enables engineering teams to execute component phase-in and phase-out on specific dates directly on the BOM header without requiring a new BOM version.
Exam Tips and Common Traps
Phantom vs. Pegged Supply : Phantom dissolves the subassembly node and injects lines into the parent order without generating a child production order. Pegged supply explicitly generates a dedicated, linked child production order.
Constant Scrap Scaling : Constant scrap does not scale when production order quantity changes. Variable scrap always scales proportionally with volume.
Dimension Group Line Type : Used when component variants must resolve dynamically based on parent product dimensions, avoiding redundant static BOM lines.