Study guide
37.2 Products Liability: Theories, Defects & Defenses
Multistate Bar Examination MBE
Track your progress as you read
Finished sections get a check mark.
1 MBE Overview, Scoring & Study Strategy
0.1 About the Multistate Bar Examination 0.2 MBE Question Mechanics & Test Pacing 0.3 High-Yield Preparation & Error Analysis Strategy
2 Civil Procedure I: Subject-Matter Jurisdiction, Removal & Governing Law
1.1 Subject-Matter Jurisdiction: Federal Question & Diversity 1.2 Supplemental Jurisdiction & Removal 1.3 The Erie Doctrine & Federal Common Law
3 Civil Procedure II: Personal Jurisdiction, Venue & Provisional Relief
2.1 Personal Jurisdiction & Service of Process 2.2 Venue, Transfer & Forum Non Conveniens 2.3 Preliminary Injunctions, TROs & Pretrial Conferences
4 Civil Procedure III: Pleadings, Joinder & Class Actions
3.1 Pleadings, Amendments & Rule 11 3.2 Joinder of Claims & Parties, Intervention & Interpleader 3.3 Class Actions & the Class Action Fairness Act
5 Civil Procedure IV: Discovery, Pretrial Motions & Jury Trials
4.1 Discovery, Disclosure & Sanctions 4.2 Rule 12 Motions, Summary Judgment, Defaults & Dismissals 4.3 Jury Trials: The Right to a Jury, Selection, Instructions & Verdicts
6 Civil Procedure V: Post-Trial Motions, Preclusion & Appeals
5.1 Judgment as a Matter of Law, New Trials & Relief from Judgment 5.2 Claim & Issue Preclusion 5.3 Appealability & Standards of Review
7 Constitutional Law I: The Federal Judicial Power
6.1 Judicial Review, Federal Jurisdiction & State Sovereign Immunity 6.2 Justiciability: Standing, Ripeness, Mootness & Political Questions
8 Constitutional Law II: The Powers of Congress
7.1 Enumerated Powers: Commerce, Taxing & Spending 7.2 War, Foreign Affairs, Civil Rights Enforcement & Other Congressional Powers
9 Constitutional Law III: The Presidency & Separation of Powers
8.1 Presidential Powers: Chief Executive, Commander in Chief, Foreign Affairs & Appointments 8.2 Interbranch Relations: Nondelegation, Presentment, Legislative Limits & Immunities
10 Constitutional Law IV: Federalism & State Power
9.1 The Tenth Amendment, Anti-Commandeering & Intergovernmental Immunities 9.2 Preemption, the Dormant Commerce Clause & Congressional Authorization
11 Constitutional Law V: State Action, Due Process & Equal Protection
10.1 State Action & Procedural Due Process 10.2 Substantive Due Process: Fundamental Rights & Other Liberty Interests 10.3 Equal Protection: Classifications, Scrutiny & Fundamental Rights
12 Constitutional Law VI: Takings & Other Economic Protections
11.1 The Takings Clause 11.2 Contracts Clause, Ex Post Facto Laws, Bills of Attainder & Privileges and Immunities
13 Constitutional Law VII: First Amendment Freedoms
12.1 Freedom of Religion: Establishment & Free Exercise 12.2 Freedom of Speech: Content Regulation, Forums, Unprotected Categories & Commercial Speech 12.3 Speech in Government Settings, Expressive Conduct, Prior Restraints, Press & Association
14 Contracts I: Formation—Offer, Acceptance & Consideration
13.1 Governing Law, Offers & Termination of the Power of Acceptance 13.2 Acceptance, Silence, Unilateral Contracts & the Battle of the Forms 13.3 Consideration, Modification, Promissory Estoppel & Restitution
15 Contracts II: Defenses to Enforcement
14.1 Capacity, Duress, Undue Influence, Unconscionability, Illegality & Public Policy 14.2 Mistake, Misunderstanding, Misrepresentation & Nondisclosure 14.3 The Statute of Frauds
16 Contracts III: Contract Terms, Interpretation & Warranties
15.1 Parol Evidence, Interpretation & Implied Terms 15.2 Warranties in the Sale of Goods
17 Contracts IV: Conditions, Performance & Breach
16.1 Conditions & Excuse of Conditions 16.2 Substantial Performance, Material Breach, Repudiation & Adequate Assurance 16.3 UCC Performance: Tender, Rejection, Cure, Revocation, Installments & Risk of Loss
18 Contracts V: Excuse, Discharge & Remedies
17.1 Impossibility, Impracticability, Frustration & Discharge 17.2 Expectation Damages, Consequential Damages, Mitigation & UCC Damage Formulas 17.3 Reliance, Restitution, Liquidated Damages, Specific Performance & Rescission
19 Contracts VI: Third-Party Beneficiaries, Assignment & Delegation
18.1 Third-Party Beneficiaries 18.2 Assignment of Rights & Delegation of Duties
20 Criminal Law I: General Principles, Defenses, Inchoate Crimes & Parties
19.1 Criminal Acts, Mental States, Mistake, Causation & Jurisdiction 19.2 Responsibility & Defenses: Insanity, Intoxication, Infancy, Justification & Excuse 19.3 Inchoate Crimes: Solicitation, Conspiracy & Attempt 19.4 Parties to Crime: Principals, Accomplices & Accessories After the Fact
21 Criminal Law II: Homicide, Property Crimes & Crimes Against the Person
20.1 Homicide: Murder, Felony Murder & Manslaughter 20.2 Theft Offenses, Receiving Stolen Property, Robbery & Burglary 20.3 Assault, Battery, Sexual Offenses, Kidnapping, Arson & Possession Offenses
22 Criminal Procedure I: The Fourth Amendment & the Exclusionary Rule
21.1 Fourth Amendment: Searches, Seizures, Arrests & Warrants 21.2 Exceptions to the Warrant Requirement & Special Needs Searches 21.3 The Exclusionary Rule, Standing & Fruit of the Poisonous Tree
23 Criminal Procedure II: Confessions, Identification & the Right to Counsel
22.1 Confessions, Miranda & the Privilege Against Self-Incrimination 22.2 Pretrial Identification & the Sixth Amendment Right to Counsel
24 Criminal Procedure III: Trial Rights, Pleas, Double Jeopardy, Punishment & Appeals
23.1 Fair Trial, Jury & Confrontation Rights, Guilty Pleas & Burdens of Proof 23.2 Double Jeopardy, Cruel & Unusual Punishment, Appeal & Error
25 Evidence I: Presenting Evidence, Relevance & Witnesses
24.1 Introducing Evidence: Judge & Jury, Objections, Judicial Notice & Presumptions 24.2 Relevance, Rule 403 & Real, Demonstrative & Illustrative Evidence 24.3 Witnesses: Competency, Mode of Examination, Refreshing Recollection & Exclusion
26 Evidence II: Impeachment, Character & Other Acts
25.1 Impeachment: Bias, Inconsistent Statements, Capacity, Contradiction & Rehabilitation 25.2 Impeachment by Character for Truthfulness, Specific Instances & Criminal Convictions 25.3 Character Evidence: The Propensity Ban, Criminal-Case Exceptions & Methods of Proof 25.4 Other Crimes, Wrongs & Acts; Habit & Routine Practice; Sexual Misconduct Rules
27 Evidence III: Opinions, Authentication, Documents, Privileges & Policy Exclusions
26.1 Lay & Expert Opinion Testimony 26.2 Authentication & Identification 26.3 Best Evidence Rule, Summaries & the Rule of Completeness 26.4 Privileges: Attorney-Client, Spousal, Psychotherapist & Other Privileges 26.5 Policy Exclusions: Remedial Measures, Compromise, Medical Payments, Pleas & Insurance
28 Evidence IV: Hearsay & Its Exceptions
27.1 The Hearsay Definition & Statements That Are Not Hearsay 27.2 Hearsay Exclusions: Prior Statements of Testifying Witnesses & Opposing Party Statements 27.3 Hearsay Exceptions Not Requiring Unavailability (FRE 803) 27.4 Unavailability Exceptions, Residual Exception, Multiple Hearsay & Confrontation
29 Real Property I: Estates, Concurrent Ownership & Leaseholds
28.1 Present Estates, Future Interests & Waste 28.2 Rule Against Perpetuities, Restraints on Alienation, Fair Housing & Conflicts of Law 28.3 Concurrent Ownership: Tenancy in Common, Joint Tenancy & Tenancy by the Entirety 28.4 Landlord & Tenant: Tenancies, Duties, Remedies & Transfers
30 Real Property II: Rights in Land
29.1 Easements, Profits & Licenses 29.2 Real Covenants, Equitable Servitudes & Common Interest Communities 29.3 Fixtures 29.4 Support, Water Rights & Zoning
31 Real Property III: Real Estate Contracts
30.1 Real Estate Contracts: Brokers, Formation, Performance & Remedies 30.2 Marketable Title, Equitable Conversion, Options, Disclosure & Merger
32 Real Property IV: Mortgages & Security Devices
31.1 Mortgages & Security Devices: Theories, Pre-Foreclosure Rights & Transfers 31.2 Discharge, Foreclosure, Redemption & Priorities
33 Real Property V: Titles
32.1 Adverse Possession 32.2 Deeds, Delivery, Title Covenants & Transfers at Death 32.3 Recording Acts, Title Assurance & Liens
34 Torts I: Intentional Torts
33.1 Intent & Intentional Torts Against the Person 33.2 Intentional Torts Against Property 33.3 Defenses & Privileges for Intentional Torts
35 Torts II: Negligence—Duty, Standard of Care & Proof
34.1 Duty: Foreseeable Plaintiffs, Failure to Act & Control of Others 34.2 Standard of Care, Custom, Negligence Per Se & Res Ipsa Loquitur
36 Torts III: Negligence—Causation, Damages & Limits on Liability
35.1 Actual Cause, Joint & Several Liability, Contribution & Indemnity 35.2 Proximate Cause, Damages, Survival & Wrongful Death 35.3 Owners & Occupiers of Land 35.4 Negligent Infliction of Emotional Distress, Intangible Harms & Pure Economic Loss
37 Torts IV: Vicarious Liability & Negligence Defenses
36.1 Vicarious Liability: Employees, Independent Contractors & Others 36.2 Defenses to Negligence: Comparative Fault, Assumption of Risk & Immunities
38 Torts V: Strict Liability & Products Liability
37.1 Strict Liability: Animals & Abnormally Dangerous Activities 37.2 Products Liability: Theories, Defects & Defenses
39 Torts VI: Nuisance, Defamation, Privacy & Economic Torts
38.1 Private & Public Nuisance 38.2 Defamation & Invasion of Privacy 38.3 Misrepresentation & Interference with Business Relations
37.2 Products Liability: Theories, Defects & Defenses
Key Takeaways Explain This Topic AI
A commercial seller is strictly liable for physical harm caused by a product that was defective when it left the seller's control, and privity is not required, so users, consumers, and bystanders may sue anyone in the commercial chain of distribution.
A manufacturing defect is a departure from the product's intended design; a design defect is judged by consumer expectations or, in most courts, by risk-utility balancing that usually requires a reasonable alternative design; and a warning defect exists when reasonable instructions or warnings of non-obvious risks were omitted.
Under the learned intermediary doctrine, a maker of a prescription drug or medical device generally satisfies its duty to warn by adequately warning the prescribing physician.
Negligence claims focus on the defendant's conduct, and a retailer ordinarily has no duty to inspect sealed goods, while warranty claims under UCC Article 2 cover express warranties, the implied warranty of merchantability, and the implied warranty of fitness for a particular purpose.
Recovery may be reduced for comparative fault or barred by unforeseeable misuse or substantial alteration, strict tort liability does not cover damage only to the product itself, and federal law may preempt some claims involving medical devices and generic drugs.
Last updated: September 2026
37.2 Products Liability: Theories, Defects & Defenses
Products liability claims can be brought under strict liability, negligence, or warranty theories. Identify the type of defect first, then confirm that the defendant is a commercial seller, that the product was defective when it left the defendant's control, and whether any defense applies.
- The Three Competing Products Liability Theories ┌────────────────────────────────┐
- │ Products Liability Theories │
- └───────────────┬────────────────┘
- │
- ┌──────────────────────────────────┼──────────────────────────────────┐
- ▼ ▼ ▼
- ┌──────────────────────┐ ┌──────────────────────┐ ┌──────────────────────┐
- │Strict Tort Liability │ │ Negligence │ │ UCC Warranties │
- │(Restatement § 402A) │ │ (Conduct of Def.) │ │ (Contractual / UCC) │
- └──────────┬───────────┘ └──────────┬───────────┘ └──────────┬───────────┘
- │ │ │
- ┌──────────┴───────────┐ ┌──────────┴───────────┐ ┌──────────┴───────────┐
- │- Commercial merchant │ │- Duty of due care │ │- Express warranty │
- │- Defective product │ │- Breach (careless) │ │- Implied merchantab. │
- │- No privity needed │ │- Inspection duties │ │- Fitness for purpose │
- │- Focus on PRODUCT │ │- Res ipsa loquitur │ │- Disclaimers / UCC │
- └──────────────────────┘ └──────────────────────┘ └──────────────────────┘
- 1. Strict Products Liability in Tort (Restatement § 402A)
Strict products liability focuses exclusively on the condition of the product , rather than the reasonableness of the defendant's conduct. Under Restatement (Second) of Torts § 402A and the Restatement (Third), a plaintiff must establish five cumulative elements:
Commercial Supplier / Merchant Seller: The defendant must be a commercial supplier who regularly engages in selling, leasing, or distributing products of the type that caused the harm. This includes component manufacturers, assemblers, wholesalers, distributors, and retail store operators.
Casual Sellers Excluded: An individual who sells a used car to a neighbor or sells a lawnmower at a garage sale is a casual seller and is not strictly liable in tort (the plaintiff must prove negligence or fraud). Courts also often limit strict liability for commercial sellers of used goods.
Pure Service Providers Excluded: Professionals who render services (e.g., a surgeon implanting a medical device, a dentist applying an anesthetic, or a blood bank providing blood transfusions) are providing services, not selling goods; strict products liability does not apply.
Hybrid Sales-Service Transactions: If a transaction involves both goods and services, courts apply the "predominant purpose" test. If services predominate (e.g., an auto mechanic installing brake pads during a brake repair), strict liability may be withheld unless the defective part was independently sold.
Defective Condition Unreasonably Dangerous: The product was defective when it left the defendant's hands (manufacturing, design, or warning defect).
Absence of Substantial Alteration: The product reached the user or consumer without substantial change in the condition in which it was sold. If a third party or the plaintiff substantially alters, tampers with, or modifies the product after it leaves the manufacturer's control, and that alteration creates the hazard, the original manufacturer is relieved of strict liability.
Causation:
Actual Cause: But-for causation (or substantial factor). The defect was a cause-in-fact of the injury.
Proximate Cause: Foreseeable use or foreseeable misuse of the product.
Damages: Actual physical personal injury or property damage to property other than the product itself .
The Economic Loss Rule
A critical MBE rule: Strict products liability in tort does NOT permit recovery for pure economic loss.
If a defective product malfunctions, fails to work, or destroys only itself (e.g., a commercial truck engine catches fire due to an electrical defect and ruins only the engine and cab, causing lost shipping profits), the plaintiff cannot recover under strict tort liability.
The economic loss rule confines pure economic loss (repair costs, replacement cost of the product, lost business revenue, commercial disappointment) to contract and warranty remedies under the UCC .
Complete Abolition of Privity of Contract
At early common law ( Winterbottom v. Wright ), an injured plaintiff could not sue a manufacturer without contractual privity. This barrier was dismantled in negligence by Benjamin Cardozo's opinion in MacPherson v. Buick Motor Co. (217 N.Y. 382 (1916)) and eliminated in strict tort by Greenman v. Yuba Power Products, Inc. (59 Cal. 2d 57 (1963)).
Foreseeable Plaintiffs: Privity is entirely abolished. Any foreseeable user, consumer, passenger, borrower, or innocent bystander (such as a pedestrian struck when an automobile's steering linkage snaps) can maintain a strict products liability action.
Vertical Distribution Chain Liability: The injured plaintiff may sue any commercial entity in the stream of commerce —the component part manufacturer, the final assembler, the regional distributor, the wholesaler, and the retail shopkeeper.
Exam Tip — The Innocent Retailer: A small retail shopkeeper who sells a sealed can of soup containing a dead insect, or sells a power tool in an unopened factory box with an internal wiring flaw, is strictly liable to the injured consumer. The fact that the retailer had no opportunity to inspect the interior and exercised perfect care is wholly irrelevant. The retailer's remedy is to seek full indemnity from the manufacturer. Some states, however, have statutes that shield nonmanufacturing sellers when the manufacturer is solvent and subject to suit.
2. Negligence Theory in Products Liability
When a products liability claim is brought under negligence , the analytical focus shifts from the product's condition to the reasonableness of the defendant's conduct :
Standard of Care: Did the defendant exercise reasonable care in designing, manufacturing, assembling, testing, inspecting, and labeling the product?
Manufacturers: Owe a duty of reasonable care throughout the production cycle. In assembly-line failures where the direct evidence of carelessness is destroyed, plaintiffs frequently utilize res ipsa loquitur to infer negligence against the manufacturer.
Wholesalers and Retailers: Unlike strict liability, a non-manufacturing retailer or wholesaler is not automatically liable in negligence. A retailer owes only a duty to perform a reasonable visual inspection of the exterior for obvious, patent defects. A retailer has no duty to unseal packages, disassemble machines, or perform scientific laboratory tests on goods received from reputable manufacturers unless the retailer has actual knowledge or reason to suspect a hidden defect.
3. Breach of Warranty Theories (Uniform Commercial Code)
Warranty claims sound in contract and the law of sales under Article 2 of the Uniform Commercial Code (UCC):
Express Warranty (UCC § 2-313): Any affirmation of fact, promise, description of the goods, or sample/model that becomes part of the "basis of the bargain." If the product fails to conform to that affirmation, the seller is strictly liable for breach of express warranty regardless of fault or lack of scienter.
Implied Warranty of Merchantability (UCC § 2-314): Automatically implied into every contract for the sale of goods where the seller is a merchant with respect to goods of that kind . Warrants that the goods are "merchantable"—meaning they are fit for the ordinary purposes for which such goods are used.
Implied Warranty of Fitness for a Particular Purpose (UCC § 2-315): Created when: (1) the seller has reason to know the particular, non-ordinary purpose for which the buyer requires the goods; and (2) the seller has reason to know that the buyer is relying on the seller's skill or judgment to select or furnish suitable goods; and (3) the buyer actually relies on that expertise.
UCC Privity Alternatives (§ 2-318): Most states have adopted Alternative A of UCC § 2-318, which extends express and implied warranties beyond the immediate buyer to any natural person in the buyer's family or household, or a guest in the home, who suffers personal injury.
Disclaimers and Contractual Limitations: Under UCC § 2-719(3), limiting consequential damages for injury to the person in the case of consumer goods is prima facie unconscionable . Warranty disclaimers are governed by UCC § 2-316; for example, a written disclaimer of the implied warranty of merchantability must mention merchantability and be conspicuous. Under the federal Magnuson-Moss Warranty Act, a seller that gives a written warranty on consumer goods may not disclaim implied warranties.
The Three Recognized Product Defect Types
To recover in strict products liability, the plaintiff must establish that the product contained one of three distinct defects: ┌────────────────────────────────────────────────────────────────────────────┐
- │ THE THREE PRODUCT DEFECT CATEGORIES │
- ├────────────────────────────────────────────────────────────────────────────┤
- │ 1. MANUFACTURING DEFECT │
- │ - Departs from intended design blueprints. │
- │ - Unique 'one-in-a-thousand' assembly flaw; differs from other units. │
- │ - Strict liability applies even if manufacturer exercised all due care.│
- │ │
- │ 2. DESIGN DEFECT │
- │ - Entire product line is manufactured correctly to blueprint, but the │
- │ underlying design itself is unreasonably dangerous. │
- │ - Evaluated under Consumer Expectations Test or Risk-Utility Balancing.│
- │ - Requires proof of feasible Reasonable Alternative Design (RAD). │
- │ │
- │ 3. INADEQUATE WARNINGS / FAILURE TO WARN │
- │ - Foreseeable risks could have been avoided by reasonable instructions.│
- │ - Inconspicuous, vague, or absent warnings of non-obvious dangers. │
- │ - Learned Intermediary Doctrine governs prescription drugs/devices. │
- └────────────────────────────────────────────────────────────────────────────┘
- 1. Manufacturing Defects
A manufacturing defect exists when a product departs from its intended design specifications and blueprints, even though all possible care was exercised in preparation and marketing (Restatement (Third) § 2(a)).
Mechanism: A single unit or batch comes off the assembly line defective (e.g., missing a crucial cotter pin, improper bolt torque, contaminated medication batch, glass fragment inside a sealed soda bottle).
Proof: Easiest defect to prove because the plaintiff merely compares the failed product against the manufacturer's own design drawings and specifications.
The Malfunction Doctrine: Similar to res ipsa loquitur, a plaintiff may circumstantially establish a manufacturing defect without proving the exact specific mechanical failure if: (1) the incident that harmed the plaintiff was of a kind that ordinarily occurs only as a result of a product defect; and (2) the evidence rules out other causes, such as plaintiff misuse or secondary impact.
2. Design Defects
A design defect exists when all products in the entire product line are manufactured perfectly according to blueprint specifications, but the design itself creates an unreasonable hazard to human safety.
Courts utilize two primary tests to determine whether a product has a design defect:
A. The Consumer Expectations Test
The product is defectively designed if it fails to perform as safely as an ordinary consumer would reasonably expect when used in an intended or reasonably foreseeable manner. While intuitive, this test is often criticized for failing to address complex, technical machinery where ordinary consumers lack informed expectations regarding safety engineering.
B. The Risk-Utility Balancing Test (Dominant Modern Standard)
The product is defectively designed if the magnitude of the foreseeable risks and danger of the design outweighs the product's inherent utility, manufacturing cost, and functional benefits .
Under the Restatement (Third) of Torts: Products Liability § 2(b), the plaintiff in a design defect case must establish a feasible Reasonable Alternative Design (RAD) by proving that:
A safer alternative design was technologically feasible and commercially available at the time of manufacture;
The alternative design was economically practical (did not drastically inflate the price or render the product unmarketable);
The alternative design would have prevented or significantly reduced the plaintiff's injuries; and
The alternative design would not have substantially impaired the product's primary utility or functionality.
MBE Tip — Inherent and Unavoidable Dangers: Products with obvious, inherent dangers that cannot be engineered out without destroying the product's core utility (e.g., sharp kitchen butcher knives, chainsaws, whiskey, tobacco) are generally not defectively designed if there is no feasible alternative design that preserves their essential function.
3. Inadequate Warnings / Failure to Warn
A product is defective due to inadequate instructions or warnings when the foreseeable risks of harm posed by the product could have been reduced or avoided by the provision of reasonable instructions or warnings, and the omission renders the product not reasonably safe (Restatement (Third) § 2(c)).
Elements of an Adequate Warning: A warning must be: (1) prominently placed and conspicuous; (2) comprehensible to an ordinary user; and (3) clearly communicate the nature, severity, and magnitude of the specific risk (e.g., a warning stating "use in ventilated area" may be legally inadequate if the fumes cause fatal pulmonary edema, requiring a bold skull-and-crossbones warning).
Open and Obvious Dangers: Manufacturers have no legal duty to warn of open, obvious, or universally known dangers (e.g., that matches cause fire, carving knives cut fingers, or BB guns can shoot out an eye).
The Learned Intermediary Doctrine: In actions involving prescription pharmaceuticals and specialized medical devices , the manufacturer discharges its legal duty to warn by providing comprehensive, adequate warnings of adverse side effects and contraindications to the prescribing physician , rather than directly to the ultimate patient.
Rationale: The physician is a "learned intermediary" who evaluates the patient's diagnostic history, weighs pharmacological risks, and determines which warnings to convey.
Exceptions: Some courts require direct warnings to patients for mass immunizations given without individualized physician involvement, for oral contraceptives ( MacDonald v. Ortho Pharmaceutical Corp. , Mass. 1985), and for drugs marketed directly to consumers ( Perez v. Wyeth Laboratories Inc. , N.J. 1999).
- Defenses to Products Liability ┌────────────────────────────────────────────────────────────────────────────┐
- │ DEFENSES IN STRICT PRODUCTS LIABILITY │
- ├────────────────────────────────────────────────────────────────────────────┤
- │ - COMPARATIVE FAULT: Plaintiff's negligence reduces damages in majority. │
- │ - ASSUMPTION OF RISK: Knowing, voluntary encounter of defect bars/reduces.│
- │ - FORESEEABLE MISUSE: NO DEFENSE; manufacturer must warn or design safe. │
- │ - UNFORESEEABLE MISUSE: Complete defense (breaks proximate causation). │
- │ - SUBSTANTIAL ALTERATION: Aftermarket tampering relieves original maker. │
- │ - CONTRACTUAL DISCLAIMERS: VOID for personal injury in strict tort. │
- │ - STATE-OF-THE-ART: Conforming to existing technology is strong defense. │
- └────────────────────────────────────────────────────────────────────────────┘
- 1. Comparative Negligence and Assumption of Risk
Modern Comparative Fault (Majority Rule): Almost all comparative fault jurisdictions apply comparative negligence principles to strict products liability actions. If the plaintiff acted carelessly (e.g., failing to read instructions, failing to wear safety goggles, or operating machinery while drowsy), the jury assigns a percentage of comparative fault, reducing the plaintiff's recovery proportionally.
Knowing Assumption of the Risk: If the plaintiff discovered the specific defect, fully appreciated the unreasonable danger, and nevertheless voluntarily and unreasonably continued to use the product , this constitutes assumption of the risk. In traditional common law states, this is a complete bar to recovery; in comparative fault states, it usually reduces recovery as a form of comparative fault.
2. Product Misuse (Foreseeable vs. Unforeseeable)
Foreseeable Misuse Is NO Defense: A manufacturer is legally obligated to anticipate and design against, or adequately warn against, all reasonably foreseeable misuses of the product.
Example: Standing on the top rung of a household stepstool to reach a high ceiling, driving 10 mph over the speed limit, or an infant chewing on a colorful plastic toy are all foreseeable misuses. The manufacturer must design safety margins or provide prominent warnings.
Unforeseeable (Abnormal) Misuse Is a Complete Bar: If the consumer uses the product in an abnormal, bizarre, or unforeseeable manner (e.g., using a gasoline-powered chainsaw as a meat carver, or using an electric hairdryer to thaw frozen meat in a bathtub), this unforeseeable misuse severs proximate causation and bars recovery.
3. Substantial Post-Sale Alteration
A manufacturer is not liable if a third party or consumer makes a substantial, unauthorized modification after the product leaves the manufacturer's control, and that alteration was the proximate cause of the failure (e.g., removing an integrated mechanical blade guard from a table saw).
4. Contractual Disclaimers and Exculpatory Clauses
In strict products liability actions seeking compensation for personal injury , contractual disclaimers (e.g., "sold as is", "manufacturer disclaims all tort liability") are wholly void as contrary to public policy . A consumer cannot contract away strict tort protection before injury occurs.
5. State-of-the-Art Defense
In design defect and failure-to-warn cases, manufacturers may introduce evidence of the "state of the art"—establishing that at the time the product was manufactured and sold, no safer alternative design or warning was scientifically or technologically discoverable or feasible.
Products Liability Comparison Table
Feature Strict Tort Liability (§ 402A) Negligence UCC Implied Warranty (Merchantability)
Primary Focus Condition of the product (defect) Conduct of the defendant (fault) Fitness of goods for ordinary purpose
Privity Required? No (any foreseeable bystander/user) No ( MacPherson v. Buick ) No (under UCC § 2-318 Alt A for household)
Pure Economic Loss? No (Economic Loss Rule applies) No (generally barred in tort) Yes (Contract/UCC damages available)
Non-Manufacturing Retailer? Strictly Liable throughout chain Liable only for negligent inspection Liable as a merchant seller
Contract Disclaimers? Void for personal injury Disclaimers disfavored Disclaimers valid if conspicuous (§ 2-316)
- More on Products Liability
- Choosing a Design Defect Test
California's approach: California lets a plaintiff prove a design defect either by showing that the product failed to perform as safely as an ordinary consumer would expect or by showing that the design caused the injury, after which the defendant must prove that the design's benefits outweigh its risks ( Barker v. Lull Engineering Co. , Cal. 1978). The consumer expectations test applies only when everyday experience allows ordinary consumers to form safety expectations ( Soule v. General Motors Corp. , Cal. 1994).
Restatement (Third) approach: The Restatement (Third) of Torts: Products Liability generally requires proof of a reasonable alternative design, with a narrow exception for designs that are manifestly unreasonable.
Other Defendants and Transactions
Component makers: A maker of a component is liable if the component itself is defective or if it substantially participates in integrating the component into a defective product design.
Commercial lessors: Many courts apply strict liability to businesses that lease products, such as car rental companies.
Successor companies: A company that buys another's assets generally is not liable for the seller's defective products unless it expressly or impliedly assumed that liability, the deal was a de facto merger, the buyer is a mere continuation of the seller, or the transaction was fraudulent. A few states add a product-line exception ( Ray v. Alad Corp. , Cal. 1977).
Post-Sale Duties
A seller may have a duty to warn after sale when it knows or should know that a product poses a substantial risk of harm and a warning can be effectively communicated to those at risk. There is generally no common-law duty to recall a product unless a statute or regulation requires a recall or the seller voluntarily undertakes one.
Federal Preemption
Medical devices: State-law claims challenging the safety or effectiveness of a medical device that received FDA premarket approval are preempted ( Riegel v. Medtronic, Inc. , 2008).
Brand-name drugs: Failure-to-warn claims against brand-name drug makers generally are not preempted, because they can strengthen their labels ( Wyeth v. Levine , 2009), unless the FDA would not have approved the warning ( Merck Sharp & Dohme Corp. v. Albrecht , 2019).
Generic drugs: Failure-to-warn and design defect claims against generic drug makers are generally preempted because federal law requires generic drugs to match the brand-name drug's label and formulation ( PLIVA, Inc. v. Mensing , 2011; Mutual Pharmaceutical Co. v. Bartlett , 2013).
Proving the Case
Defect Test Typical Proof
Manufacturing The product departed from its intended design Comparison with specifications or circumstantial evidence under the malfunction doctrine
Design Consumer expectations, or risk-utility with a reasonable alternative design Expert testimony about feasible, safer designs
Warning Reasonable instructions or warnings would have reduced foreseeable risks Evidence that an adequate warning would have been read and followed; some states presume it would have been
Defect at the time of sale: The plaintiff must show that the defect existed when the product left the defendant's control, often through circumstantial evidence.
Statutes of repose: Many states bar products claims brought more than a set number of years after the product was first sold.