Study guide

12.5 Chemical Equilibrium: Keq & Le Chatelier's Principle

MCAT Chemical and Physical Foundations of Biological Systems Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction

1.1 Exam Format, Scoring & the Two Foundational Concepts 1.2 Scientific Inquiry & Reasoning Skills (SIRS) and No-Calculator Rules

2 Chapter 1: Translational Motion, Forces, Work & Energy

Units, Vectors & Translational Motion Newton's Laws, Force & Friction Equilibrium: Vector Analysis of Forces & Torque Work and the Work-Energy Theorem Kinetic/Potential Energy, Conservation of Energy & Power Periodic Motion: Amplitude, Frequency, Phase & Wave Types

3 Chapter 2: Fluids & Gas Phase

3.1 Fluid Statics: Density, Buoyancy & Hydrostatic Pressure 3.2 Fluid Dynamics: Viscosity, Continuity & Bernoulli's Equation 3.3 The Circulatory System as a Fluid System 3.4 Gas Laws & the Kinetic Molecular Theory

4 Chapter 3: Electrochemistry & Circuits

4.1 Electrostatics: Charge, Coulomb's Law & Electric Fields 4.2 Circuit Elements: Current, Voltage & Resistance 4.3 Capacitance & Magnetism 4.4 Electrochemical Cells: Galvanic & Electrolytic 4.5 Nerve Cell Conduction & Electrochemical Gradients

5 Chapter 4: Light & Sound

5.1 Sound: Production, Intensity & the Doppler Effect 5.2 Light & Electromagnetic Radiation: Interference & Diffraction 5.3 Molecular Spectroscopy: IR, UV-Vis & NMR 5.4 Geometrical Optics: Mirrors, Lenses & the Eye

6 Chapter 5: Atomic Structure & the Periodic Table

6.1 The Atomic Nucleus & Radioactive Decay 6.2 Electronic Structure & Quantum Numbers 6.3 The Periodic Table: Classification of Elements 6.4 Periodic Trends: Ionization Energy, Electronegativity & Atomic Size 6.5 Stoichiometry & Chemical Equations

7 Chapter 6: Water, Solutions & Acid-Base Equilibria

7.1 Brønsted–Lowry Acids/Bases, Water Ionization & pH 7.2 Weak Acids, Weak Bases & Buffers 7.3 Ions in Solution & Solubility Equilibria 7.4 Titration: Indicators, Neutralization & Titration Curves

8 Chapter 7: Covalent Bonding & Intermolecular Forces

8.1 Lewis Structures, Resonance & Formal Charge 8.2 Hybridization, VSEPR & Molecular Geometry 8.3 Stereochemistry: Isomers, Chirality & Optical Activity 8.4 Intermolecular Forces in the Liquid Phase

9 Chapter 8: Separations & Purification Methods

9.1 Extraction, Distillation & Chromatography 9.2 Electrophoresis & Protein/Peptide Separation

10 Chapter 9: Biomolecules I — Nucleic Acids, Amino Acids & Proteins

10.1 Nucleotides & Nucleic Acid Structure 10.2 Amino Acid Structure, Classification & Synthesis 10.3 Peptide Bonds & Protein Primary Structure 10.4 Protein Secondary, Tertiary & Quaternary Structure 10.5 Protein Stability, Denaturation & Non-Enzymatic Protein Function 10.6 Lipids: Structure & Classification

11 Chapter 10: Biomolecules II — Carbohydrates & Organic Functional Groups

11.1 Carbohydrates: Structure & Nomenclature 11.2 Aldehydes & Ketones: Nucleophilic Addition Reactions 11.3 Alcohols: Reactions & Properties 11.4 Carboxylic Acids: Structure & Reactivity 11.5 Acid Derivatives: Esters, Amides & Anhydrides 11.6 Phenols & Biological Redox Centers 11.7 Polycyclic & Heterocyclic Aromatic Compounds in Biology

12 Chapter 11: Enzymes & Bioenergetics

11.1 Enzyme Structure, Mechanism & Specificity 11.2 Enzyme Kinetics: Michaelis–Menten & Cooperativity 11.3 Enzyme Inhibition Types & Regulatory Enzymes 11.4 Principles of Bioenergetics & Biological Redox

13 Chapter 12: Thermodynamics, Kinetics & Chemical Equilibrium

12.1 Thermodynamic Laws, Enthalpy & Hess's Law 12.2 Entropy, Free Energy & Spontaneity 12.3 Phase Changes & Phase Diagrams 12.4 Reaction Kinetics: Rate Laws, Arrhenius & Half-Life 12.5 Chemical Equilibrium: Keq & Le Chatelier's Principle

14 Chapter 13: Integration, Strategy & Final Review

13.1 Integrating Physics & Chemistry in Biological Passages 13.2 No-Calculator Math: Approximation & Estimation Strategies 13.3 Passage-Based Question Strategy & 95-Minute Time Management 13.4 Final Review Checklist & Full-Length Practice Plan

12.5 Chemical Equilibrium: Keq & Le Chatelier's Principle

Key Takeaways Explain This Topic AI

The equilibrium constant Keq = [products]^coefficients ÷ [reactants]^coefficients depends only on temperature — concentration, pressure, and volume changes shift the position of equilibrium but never change the numerical value of Keq.

Pure solids and pure liquids are omitted from equilibrium constant expressions because their effective concentrations remain constant.

Le Chatelier's Principle predicts equilibrium shifts from added or removed species and from volume/pressure changes, which shift equilibrium toward the side with fewer moles of gas under compression.

Temperature is the one Le Chatelier stress that actually changes the numerical value of Keq itself; raising temperature always favors the endothermic direction of a reaction.

A catalyst speeds the approach to equilibrium but never shifts its position or changes Keq, because it lowers activation energy for the forward and reverse reactions equally.

Last updated: July 2026

Most reactions relevant to the MCAT don't run to completion — they reach equilibrium , a dynamic state where the forward and reverse reaction rates become equal. At equilibrium, reactant and product concentrations stop changing, but the reaction itself hasn't stopped: molecules continue converting in both directions at exactly matched rates. This section builds on the thermodynamic favorability discussed in Sections 12.1–12.3 by supplying the quantitative tool for describing exactly where that balance point sits: the equilibrium constant. In physiology, the same ideas govern hemoglobin-oxygen binding, the CO2/bicarbonate buffer, and reversible metabolic steps near equilibrium in glycolysis.

Dynamic Equilibrium vs. Completion

A reaction that "goes to completion" has such a large Keq that leftover reactants are negligible; still, that is a limiting case of equilibrium, not a separate law. Dynamic equilibrium emphasizes that both directions continue: for A ⇌ B at equilibrium, rate_forward = rate_reverse, so d[A]/dt = 0 even though molecules still convert. Confusing static "stopped" with dynamic balance is a common wording trap.

The Law of Mass Action and the Equilibrium Constant

For a general reversible reaction aA + bB ⇌ cC + dD, the Law of Mass Action states that at equilibrium, the ratio of product concentrations to reactant concentrations — each raised to its own stoichiometric coefficient — is constant at a given temperature:

Keq = [C]^c[D]^d / ([A]^a[B]^b)

Two rules govern what belongs inside this expression. First, pure solids and pure liquids are omitted , because their effective concentration never changes and is instead folded into the constant itself. Second, only species that can actually vary in concentration — typically aqueous solutes or gases — appear in the expression. When every species is a gas, chemists often use Kp , written in terms of partial pressures instead of concentrations; Kp and Kc relate through Kp = Kc(RT)^Δn , where Δn is the change in moles of gas (moles of gaseous product minus moles of gaseous reactant).

Keq depends only on temperature. This is one of the most important traps on this topic: adding more reactant, removing product, or changing volume or pressure never changes the numerical value of Keq — those stresses shift the actual concentrations present at equilibrium, but the ratio the system settles back into is unchanged unless temperature itself changes.

The magnitude of Keq tells you where equilibrium lies without any arithmetic at all: Keq ≫ 1 means products dominate at equilibrium, Keq ≪ 1 means reactants dominate, and Keq ≈ 1 means comparable amounts of both are present. Remember from Section 12.2 that this magnitude maps onto ΔG° through ΔG° = −RT ln Keq.

Worked Example: Calculating Keq from Equilibrium Concentrations

For the Haber process, N2(g) + 3 H2(g) ⇌ 2 NH3(g), suppose equilibrium concentrations are measured as [N2] = 0.50 M, [H2] = 0.50 M, and [NH3] = 2.0 M. Write the expression and substitute directly:

Keq = [NH3]² / ([N2][H2]³) = (2.0)² / (0.50 × 0.50³) = 4.0 / (0.50 × 0.125) = 4.0 / 0.0625 = 64

Because Keq is much greater than 1, this equilibrium strongly favors ammonia — the product side — under these particular conditions.

Heterogeneous Equilibria

For CaCO3(s) ⇌ CaO(s) + CO2(g), the expression collapses to Keq = P_CO2 (or [CO2] if written as Kc), because pure solids drop out. Adding more solid CaCO3 does nothing to Keq or to equilibrium P_CO2 as long as some solid remains. This is a classic MCAT item pattern for solid-gas decompositions and for solubility equilibria written with solid pure phases omitted.

ICE Tables (Brief)

When only initial concentrations and Keq are known, an ICE table (Initial, Change, Equilibrium) tracks how concentrations move to equilibrium. For aA ⇌ bB with known Keq, define the change as x, write equilibrium concentrations as [A]0 − ax and [B]0 + bx, substitute into Keq, and solve for x. The MCAT rarely demands messy quadratic algebra; expect clean numbers, approximations when Keq is very small (x ≪ [A]0), or qualitative questions about the direction of shift rather than a full numerical solve.