Study guide
2.4 Pavement Markings: Line Types, Word Markings & Bicycle and Pedestrian Markings
Maryland DMV Driver License Knowledge Test Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: MVA Testing, Rookie Driver Licensing & Medical Standards
1.1 MVA Knowledge Test, Skills Test & Testing Accommodations 1.2 Vision Screening, Reportable Medical Conditions & Medical Review 1.3 Rookie Driver GLS & the Learner's Instructional Permit 1.4 Provisional License Restrictions, Sanctions & the 18-Month Clean Record 1.5 Full Driver's License, Co-Signers & Out-of-Country Licenses
2 Chapter 2: Traffic Signs, Signals & Pavement Markings
2.1 Sign Colors, Shapes & Regulatory Signs 2.2 Warning Signs & Guide, Route, Service and Mile Marker Signs 2.3 Traffic Signals, Arrows, Flashing Signals & Lane-Use Signals 2.4 Pavement Markings: Line Types, Word Markings & Bicycle and Pedestrian Markings
3 Chapter 3: Basic Driving, Right-of-Way, Speed, Passing, Turning & Parking
3.1 Defensive Driving, Visual Search & Risk Management 3.2 Right-of-Way Rules, Intersections & Funeral Processions 3.3 Speed Limits, Following Distance & Stopping Distance 3.4 Lane Driving, Lane Changes & Passing Rules 3.5 Turning, Hand Signals, U-Turns & Roundabouts 3.6 Parking Rules, No-Parking Zones & Disability Parking
4 Chapter 4: Driving Situations, Weather & Special Roadways
4.1 Reduced Visibility, Headlight Rules & Night Driving 4.2 Fog, Rain, Snow, Ice & Winter Emergency Kits 4.3 Skids, Hydroplaning, Anti-Lock Brakes & Driver-Assistance Technology 4.4 Highway-Railroad Grade Crossings 4.5 Work Zone Safety, Flaggers & Speed Cameras 4.6 Interstate & Limited-Access Highways: Entering, Exiting & Stopping
5 Chapter 5: Impaired, Distracted, Aggressive & Drowsy Driving
5.1 Alcohol, Drugs, BAC Limits & Open Container Rules 5.2 Implied Consent, Administrative Suspensions, DUI/DWI Penalties & Noah's Law 5.3 Distracted Driving, Cell Phone & Texting Laws, and Headsets 5.4 Aggressive Driving, Road Rage & Drowsy Driving
6 Chapter 6: Sharing the Road
6.1 Pedestrian Right-of-Way, Crosswalks & Vulnerable Pedestrians 6.2 Bicycles, Bicyclist Rules, E-Bikes & Electric Low-Speed Vehicles 6.3 Large Trucks, Buses & the No-Zones 6.4 School Buses, Emergency Vehicles & the Move Over Law 6.5 Motorcycles, Mopeds, Scooters & Slow-Moving Vehicles
7 Chapter 7: Occupant Safety, Crashes, Traffic Stops, Penalties & MVA Requirements
7.1 Seat Belts, Child Safety Seats & Air Bags 7.2 Crash Duties: Injuries, Information Exchange & Unattended Property 7.3 Roadside Emergencies & Law Enforcement Traffic Stops 7.4 MVA Points, Suspension, Revocation, Cancellation & False Identification 7.5 Insurance Requirements, Organ Donation & Voter Registration
2.4 Pavement Markings: Line Types, Word Markings & Bicycle and Pedestrian Markings
Key Takeaways Explain This Topic AI
Yellow lines separate traffic moving in opposite directions, and yellow should always be on your left; white lines separate same-direction lanes and mark the right edge.
A broken line means crossing or passing is permitted with care; a solid line on your side means you may not pass; double solid yellow means no passing in either direction.
You may make a left turn across a double solid yellow line, for example into a driveway.
Double broken yellow lines mark reversible lanes, and a solid line plus a broken line on each side marks a two-way left-turn lane.
Yield lines are rows of small triangles that show where you must yield, and the stop line is a solid white line showing where to stop.
Last updated: October 2026
Why Markings Matter
Pavement markings give "important guidance and information without requiring you to look away from the road." Some lines are extra wide or have reflective markers to draw attention. Two rules hold everything together:
Yellow separates traffic moving in opposite directions and marks the left edge of the road. Yellow should never be on your right .
White separates lanes moving in the same direction and marks the right edge of the road.
In fog, rain or darkness, use these colors as a guide: the right edge line (white) and the yellow line on your left keep you in your lane.
Line Types in the Maryland Manual
Marking Meaning
Single broken white Separates same-direction lanes; changing lanes is permitted. Used on roads with more than one lane each way.
Single solid white Marks the right edge of the road. Between same-direction lanes it means changing lanes is discouraged .
Double solid white Same-direction lanes where changing lanes is not allowed ; may separate general lanes from HOV lanes, or appear before an obstruction you may pass on either side.
Single broken yellow Center line on a two-lane, two-way road; passing with care is permitted in either direction .
Single solid yellow Marks the left edge of divided highways, one-way roads and ramps.
Double solid yellow Opposing traffic; passing is not allowed in either direction . You may turn left across it, for example into a driveway.
Solid plus broken yellow Passing is allowed for traffic on the broken-line side and not allowed for traffic on the solid-line side .
Double broken yellow Marks the edges of reversible lanes ; enter and exit as signs and signals permit.
Two-way left-turn lane edges Solid yellow on the outside and broken yellow on the inside of a center lane used for left turns from both directions.
Single dotted (yellow or white) Continues lane lines through intersections ; stay inside them while you turn or cross.
Using a Two-Way Left-Turn Lane
Enter the center lane only to slow down and wait for a gap before turning left, or to wait after turning out of a driveway. Do not use it as a travel lane or a passing lane. Drivers from the opposite direction use the same lane, so watch for them ahead.
Passing and the Center Line
Passing is legal only where the line on your side is broken and the road ahead is clear. Even with a broken line, the passing rules in Section 3.4 still apply: no passing near hilltops, curves, intersections, railroad crossings or obstructed bridges. Maryland law makes one narrow exception for bicycles : you may cross into the left side of a no-passing zone just enough to pass a bicycle at a safe distance, while yielding to the cyclist and to oncoming traffic.
Other Pavement Markings
Stop line: a solid white line showing where to stop for a STOP sign or a red signal.
Yield line: a row of small triangles across the lane showing where to yield to vehicles or pedestrians.
Word and symbol markings tell you how to use a lane, warn of lane reductions , show direction of travel, combine arrows with words to show permitted moves, and give advance warning with "SCHOOL" and "RxR" (railroad crossing) markings.
Pedestrian and Bicycle Markings
Most Maryland roads that bicycles share with cars have no special signs or markings, but some, mostly in cities, have:
Shared-use lane markings (a bicycle symbol with chevrons). They alert drivers that bicyclists may be on the road, show cyclists where to ride, and discourage riding the wrong way.
Bike lanes , separated from motor-vehicle lanes by solid or broken white lines and marked with bike-lane signs or bicycle symbols and arrows. Similar lines may separate a bike lane from a parking lane. You must yield to bicyclists in a bike lane when you enter or cross it (see Section 6.2).
Crosswalk lines: solid white lines showing where pedestrians cross. Some crosswalks add lines between or instead of the two edge lines. Remember that most intersections have a crosswalk even if it is not marked.
Practice Scenarios
On a two-lane road the center has a solid yellow line on your side and a broken yellow line on the other side. You may not pass, but oncoming drivers may.
You want to turn left into a store driveway across a double solid yellow line. This is allowed when it is safe.
You see triangles painted across your lane before a roundabout. They are yield lines, so stop there if needed and yield to traffic in the circle.
Lanes are separated by double solid white lines near a tunnel. Stay in your lane until the lines become broken.