Study guide

10.1 OSHA Employer Duties and Enforcement

Maryland General Contractor Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Overview and Maryland Licensing Landscape

1.1 Current Exam Facts 1.2 How Maryland Licenses Contractors 1.3 What Counts as Home Improvement

2 Licensing Categories and Qualifications

2.1 Contractor and Salesperson Licenses 2.2 Experience and Character Requirements 2.3 Financial Solvency, Credit Reports, and Surety Bonds 2.4 Insurance Requirements

3 Fees, Renewal, and License Maintenance

3.1 Application Process and Current Fees 3.2 The Two-Year License Cycle 3.3 Displaying the License and Advertising Rules

4 Home Improvement Contract Requirements

4.1 Mandatory Contract Contents 4.2 Deposits and Payment Rules 4.3 Required Notices, Mortgage Clauses, and Arbitration 4.4 Special Rules: Rooftop Solar and Insurance-Claim Work

5 Guaranty Fund, Penalties, and Enforcement

5.1 The Home Improvement Guaranty Fund 5.2 Prohibited Acts and Criminal Penalties 5.3 Complaints, Mediation, and Discipline

6 Door-to-Door Sales Act

6.1 The Right to Cancel 6.2 How Cancellation Works and Exceptions

7 Construction Contract Law Essentials

7.1 Contract Types: Stipulated Sum, Cost-Plus, Unit Price 7.2 Formation and Essential Clauses 7.3 Change Orders, Completion, and Warranties 7.4 Disputes and Subcontractor Agreements

8 Mechanic's Liens and Surety Bonds

8.1 Maryland Mechanic's Lien Law 8.2 Establishing and Defending Liens 8.3 Surety Bonds in Construction

9 Labor and Employment Law

9.1 Employees vs Independent Contractors 9.2 Payroll, Withholding, and Unemployment 9.3 Prevailing Wage and Public Work

10 Safety Regulations and Building Codes

10.1 OSHA Employer Duties and Enforcement 10.2 Fall Protection, Trenching, and Scaffolds 10.3 Hazard Communication and Lead Paint 10.4 Building Codes and Permits in Maryland

11 Estimating, Project Management, and Business Finance

11.1 Construction Estimating 11.2 Scheduling and Project Management 11.3 Job Costing and Financial Management 11.4 Business Formation and Maryland Taxes

10.1 OSHA Employer Duties and Enforcement

Key Takeaways Explain This Topic AI

Maryland is a state-plan state: Maryland Occupational Safety and Health (MOSH) enforces standards at least as effective as federal OSHA construction rules in 29 CFR Part 1926

The General Duty Clause, Section 5(a)(1) of the OSH Act, requires a workplace free from recognized hazards likely to cause death or serious physical harm, even when no specific standard applies

Under the multi-employer worksite doctrine, a general contractor can be cited as the controlling employer even when none of its own employees are exposed to the hazard

Current maximum penalties (adjusted January 15, 2025) are $16,550 per serious or other-than-serious violation and $165,514 per willful or repeated violation

Fatalities must be reported within 8 hours; inpatient hospitalizations, amputations, and eye losses within 24 hours; the OSHA 300A summary posts February 1 through April 30

Last updated: July 2026

Who Enforces Safety on a Maryland Job Site?

The federal Occupational Safety and Health Administration (OSHA) was created by the Occupational Safety and Health Act of 1970 (the OSH Act ). Maryland is one of the states that operates its own OSHA-approved state plan: Maryland Occupational Safety and Health (MOSH) , a unit of the Maryland Department of Labor, covers most private-sector employers and all state and local government workplaces in Maryland. A state plan must be at least as effective as federal OSHA, so MOSH adopts the federal construction standards in 29 CFR Part 1926 and can add state-specific requirements. For exam purposes, when a question references an OSHA construction standard, MOSH enforces the same rule on a Maryland site.

A fundamental principle the exam tests repeatedly: the employer is responsible for compliance , and on a construction site the general contractor that controls the project carries the primary burden. It is no defense that a subcontractor's employee was the one exposed, that the GC did not own the ladder, or that the crew was told to be careful. Duties cannot be delegated away by contract.

The General Duty Clause

Section 5(a)(1) of the OSH Act, the General Duty Clause , requires every employer to furnish each employee a place of employment free from recognized hazards that are causing or are likely to cause death or serious physical harm . OSHA uses it as a backstop when no specific standard addresses the hazard — classic examples include heat stress and some ergonomic hazards. To sustain a General Duty Clause citation, OSHA must show four things: a hazard existed, the hazard was recognized (by the employer or the industry), it was likely to cause death or serious physical harm, and a feasible means existed to correct it. If a specific standard covers the condition, OSHA must cite that standard instead.

The Multi-Employer Worksite Doctrine

Construction sites host many employers at once, so OSHA's multi-employer citation policy (CPL 02-00-124) recognizes four roles. More than one can apply to the same company:

Creating employer — the one whose act created the hazard (a sub who removes a guardrail).

Exposing employer — the one whose own employees are exposed to the hazard.

Correcting employer — the one responsible, by contract or practice, for fixing the hazard.

Controlling employer — the one with general supervisory authority over the worksite, including the power to correct hazards or require others to correct them. This is almost always the general contractor .

The controlling employer has a duty of reasonable care to detect and prevent violations, and can be cited even if none of its own employees were exposed . A GC that walks past an unguarded floor opening every day without acting is citable. Reasonable care is judged against factors like the scale of the project, the frequency of site inspections, and whether the GC knew or should have known of the hazard.

How OSHA Inspections Work

OSHA (and MOSH) cannot inspect every site, so inspections follow a priority order:

Imminent danger — hazards that could cause death or serious harm immediately.

Fatalities and catastrophes — including incidents employers must report.

Worker complaints and referrals — formal complaints from employees get high priority.

Programmed inspections — planned inspections targeting high-hazard industries; construction is always on this list.

Follow-up inspections — verifying that prior citations were abated.

An inspection typically includes an opening conference, a walkaround with employer and employee representatives, employee interviews, and a closing conference. Employers may require a warrant, but refusing entry rarely helps and can escalate the visit.

Citation Types and Penalties

  • Violation type Meaning Maximum penalty (adjusted Jan. 15, 2025)
  • De minimis Technical violation, no direct impact on safety No penalty; notice only
  • Other-than-serious Related to safety but unlikely to cause death or serious harm $16,550 per violation

Serious Substantial probability of death or serious physical harm, and the employer knew or should have known $16,550 per violation

  • Willful Intentional and knowing violation, or plain indifference to employee safety $165,514 per violation
  • Repeated Same or substantially similar violation cited again within the lookback period $165,514 per violation
  • Failure to abate Violation not corrected by the abatement date $16,550 per day it continues

These maximums are adjusted for inflation every January, so the exam's dollar figures may trail the current OSHA penalties page — focus on the relative structure: willful and repeated violations cost roughly ten times a serious one, and failure to abate accrues daily. Penalties are assessed per violation and per exposed instance , so one unguarded roof edge with six workers can generate six serious citations. Willful violations are generally not eligible for the good-faith and size reductions available for other citations, and criminal penalties are possible when a willful violation causes a worker's death.

Recordkeeping: The 300 Log

Employers with more than 10 employees must keep OSHA injury and illness records under 29 CFR Part 1904 :

OSHA Form 300 — the running Log of Work-Related Injuries and Illnesses .

OSHA Form 301 — the Incident Report, completed within 7 calendar days of learning of a recordable case.

OSHA Form 300A — the annual summary, certified by a company executive and posted February 1 through April 30 of the following year.

Records must be retained for 5 years . Separately, every employer — even those exempt from routine log-keeping — must report a fatality within 8 hours and any inpatient hospitalization, amputation, or loss of an eye within 24 hours . Falsifying the log or missing a reportable event is itself citable, and deliberate falsification pushes the case toward the willful tier.