Study guide
Adhesion, Preparation and Primers
Maryland Nail Technician License Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Pathogens, Hand Hygiene and Exposure Prevention
Pathogens and Disease Transmission Hand Hygiene and Glove Changes Cleaning, Disinfection and Sterilization
2 Chapter 2: Implement Processing and Clean Storage
Processing Contaminated Implements Labeling and Storing Processed Tools Choosing Single-Use and Reusable Supplies
3 Chapter 3: Disinfectants, Labels and Safety Data Sheets
Disinfectant Labels, Dilution and Safety Data Sheets Chemical Labels and Secondary Containers Using Safety Data Sheets
4 Chapter 4: Workstations, Equipment and Footbath Sanitation
Daily Workstation Cleaning and Turnover Cleaning and Maintaining Salon Equipment Footbath Disinfection and Water-System Biofilm
5 Chapter 5: Exposure Response and Chemical Protection
Exposure Incidents and Client Injury Worker Exposure Assessment and Follow-up Adverse Chemical Reactions and Protective Equipment
6 Chapter 6: Safe Salon Conditions and Client Protection
Physical Salon Conditions and Ergonomics Safe Water Temperature and Soaking Electrical Safety at Wet and Dry Stations Client Barriers, Draping and Product Dispensing
7 Chapter 7: Chemical Controls and Regulatory Responsibilities
Chemical Storage, Fire Prevention and Disposal Ventilation and Nail Dust Control OSHA, EPA and FDA Responsibilities MMA, EMA and Chemical Product Safety
8 Chapter 8: Consultation and Nail and Skin Analysis
Intake, Consent, Service Selection and Referral Nail Structure and Growth Skin Structure and Service Analysis
9 Chapter 9: Nail Disorders, Disease and Discoloration
Nail Disorders and Conservative Modifications Suspected Nail Disease and Service Contraindications Discoloration, Moisture Traps and Enhancement Deferral
10 Chapter 10: Skin Reactions and Enhancement Suitability
Skin Disorders, Allergy Testing and Reactions Enhancement Suitability and Contraindications
11 Chapter 11: Massage, Devices and Hot Towels
Cosmetic Hand and Foot Massage Skin-Care Tools and Devices Hot Towel Application and Removal
12 Chapter 12: Skin Products, Paraffin and Callus Care
Skin Products and Maryland Paraffin Procedures Callus Reduction and Prohibited Cutting
13 Chapter 13: Natural Nail Procedures and Filing
Manicure Procedures, Filing and Cuticle Care Pedicure Procedures and Natural Nail Repair Electric Files, Abrasives and Safe Shaping
14 Chapter 14: Chemistry, Adhesion and Tip and Wrap Systems
Nail Product Chemistry and Polymerization Adhesion, Preparation and Primers Nail Tips and Fabric Wrap Repairs
15 Chapter 15: Enhancement Systems, Maintenance and Removal
Liquid-and-Powder Enhancements on Forms Light-Cured Gel Systems and Lamp Matching Dip Powder, Gel Polish and Decorative Products Maintenance, Repair and Solvent Removal
16 Chapter 16: Maryland Licensing and PSI Examinations
Maryland Eligibility, Licensing and Renewal Current PSI Blueprint and Exam Logistics Practical Kit and Five Timed Demonstrations
Adhesion, Preparation and Primers
Key Takeaways Explain This Topic AI
Prepare a suitable plate without unnecessary abrasion or tissue damage.
Primer terminology does not prove universal safety or compatibility.
Investigate lifting through the whole system rather than progressively thinning the plate.
Last updated: October 2026
Bond to a suitable surface without damaging it
Adhesion is the attachment between the natural nail and the applied material. It depends on the plate's condition, preparation, product compatibility and application. Poor adhesion does not justify removing more natural keratin indiscriminately. The objective is a suitable clean surface with preserved tissue, not the roughest possible nail.
Begin with consultation and inspection. An inflamed, painful, separated or suspiciously discolored nail may require deferral before any primer is opened. Remove existing product safely where appropriate and examine the plate. Do not use stronger chemicals to compensate for a contraindication or an uncertain removal history.
Surface contamination
Oils, lotion, moisture and debris can interfere with some systems. The nail bed and plate do not contain sebaceous glands that manufacture oil; contamination can come from other skin, products or handling. Prepare according to the manufacturer's procedure and avoid touching the prepared plate unnecessarily afterward.
A dehydrator or preparation cleanser is a system-specific product used to address surface conditions. It does not cure disease or permanently dry the nail. Do not repeat application indefinitely to overcome lifting. Excessive solvent exposure can irritate skin and affect comfort, while the underlying compatibility or technique problem remains.
- Preparation issue Better response
- Lotion on the plate Clean according to the supported system
- Incomplete removal of appropriate nonliving cuticle Correct gently without cutting living folds
- Thin painful plate Reassess suitability, not aggressive roughening
- Wrong or unidentified primer Resolve product identity before use
- Prepared plate touched by contaminated glove Restore appropriate cleanliness before application
- Abrasion and tissue preservation
Some systems call for limited surface refinement; others have different preparation requirements. Use the supported abrasive and method, with light controlled work. Do not impose a universal grit or remove all surface layers until the nail turns visibly thin. The plate protects living tissue beneath it, and unnecessary thinning can cause pain and damage.
Distinguish nonliving material adhering to the plate from the living proximal fold. Remove only what the technique safely permits. A deep groove caused by a file is not a necessary adhesion feature. Stop if the client reports pain or if the plate condition makes the preparation unsuitable.
Primer types
Primers support adhesion through product-specific chemistry. Some contain methacrylic acid; others are marketed as non-acid or acid-free systems. Marketing terminology does not establish that a primer has no irritation hazard or is compatible with every enhancement. Review the actual directions and safety data sheet.
Apply the required amount to the intended area, avoiding skin. Do not flood the folds or use primer as a disinfectant. Drying or waiting instructions vary by system. A chalky appearance, universal thirty-minute application window or one fixed number of coats should not be assumed across brands.
Lifting analysis
If an enhancement lifts, inspect its location and the tissue beneath it. Product touching skin, inadequate supported preparation, inappropriate bead consistency, incompatible products, poor structural balance and wear can contribute. Do not jump to a diagnosis of infection or blame client oil production without evidence.
Never seal a lifted pocket over a concerning change. Remove unsupported material by the supported procedure, preserve the plate and reassess. If discoloration, inflammation or pain is present, defer and refer as appropriate. A fill is not merely gluing the old border down.
System compatibility
Use the manufacturer-supported sequence of cleanser, primer, liquid, powder, gel or adhesive. Combining familiar products from different systems can change performance. The fact that every bottle is sold for nails does not prove compatibility. Consult reliable product information before substitutions.
Follow storage conditions as well. A degraded or contaminated product may behave differently from a fresh one. Keep containers closed, avoid returning used portions to stock and preserve labels. Review working conditions before increasing abrasion or chemical exposure to force adhesion.
Applied case: repeated lifting
A technician responds to repeated lifting by filing each returning client's plate more aggressively. The result is thinner nails and increased sensitivity. Stop that pattern. Assess product identity, supported preparation, placement, structure and wear, and determine whether the tissue remains suitable. More removal is not a diagnosis or a cure.
In a second case, a primer labeled acid free splashes on skin. Do not dismiss it as harmless. Follow the product's exposure instructions and assess the client. Marketing language does not replace first aid or the safety data sheet.
For exam questions, select preparation that preserves tissue and follows the actual system. Adhesion depends on several controlled conditions. An answer promising universal bonding through one stronger primer or one rougher file ignores both compatibility and the client's health.
Sources: CND preparation instructions , FDA product safety .