Study guide

Electric Files, Abrasives and Safe Shaping

Maryland Nail Technician License Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Pathogens, Hand Hygiene and Exposure Prevention

Pathogens and Disease Transmission Hand Hygiene and Glove Changes Cleaning, Disinfection and Sterilization

2 Chapter 2: Implement Processing and Clean Storage

Processing Contaminated Implements Labeling and Storing Processed Tools Choosing Single-Use and Reusable Supplies

3 Chapter 3: Disinfectants, Labels and Safety Data Sheets

Disinfectant Labels, Dilution and Safety Data Sheets Chemical Labels and Secondary Containers Using Safety Data Sheets

4 Chapter 4: Workstations, Equipment and Footbath Sanitation

Daily Workstation Cleaning and Turnover Cleaning and Maintaining Salon Equipment Footbath Disinfection and Water-System Biofilm

5 Chapter 5: Exposure Response and Chemical Protection

Exposure Incidents and Client Injury Worker Exposure Assessment and Follow-up Adverse Chemical Reactions and Protective Equipment

6 Chapter 6: Safe Salon Conditions and Client Protection

Physical Salon Conditions and Ergonomics Safe Water Temperature and Soaking Electrical Safety at Wet and Dry Stations Client Barriers, Draping and Product Dispensing

7 Chapter 7: Chemical Controls and Regulatory Responsibilities

Chemical Storage, Fire Prevention and Disposal Ventilation and Nail Dust Control OSHA, EPA and FDA Responsibilities MMA, EMA and Chemical Product Safety

8 Chapter 8: Consultation and Nail and Skin Analysis

Intake, Consent, Service Selection and Referral Nail Structure and Growth Skin Structure and Service Analysis

9 Chapter 9: Nail Disorders, Disease and Discoloration

Nail Disorders and Conservative Modifications Suspected Nail Disease and Service Contraindications Discoloration, Moisture Traps and Enhancement Deferral

10 Chapter 10: Skin Reactions and Enhancement Suitability

Skin Disorders, Allergy Testing and Reactions Enhancement Suitability and Contraindications

11 Chapter 11: Massage, Devices and Hot Towels

Cosmetic Hand and Foot Massage Skin-Care Tools and Devices Hot Towel Application and Removal

12 Chapter 12: Skin Products, Paraffin and Callus Care

Skin Products and Maryland Paraffin Procedures Callus Reduction and Prohibited Cutting

13 Chapter 13: Natural Nail Procedures and Filing

Manicure Procedures, Filing and Cuticle Care Pedicure Procedures and Natural Nail Repair Electric Files, Abrasives and Safe Shaping

14 Chapter 14: Chemistry, Adhesion and Tip and Wrap Systems

Nail Product Chemistry and Polymerization Adhesion, Preparation and Primers Nail Tips and Fabric Wrap Repairs

15 Chapter 15: Enhancement Systems, Maintenance and Removal

Liquid-and-Powder Enhancements on Forms Light-Cured Gel Systems and Lamp Matching Dip Powder, Gel Polish and Decorative Products Maintenance, Repair and Solvent Removal

16 Chapter 16: Maryland Licensing and PSI Examinations

Maryland Eligibility, Licensing and Renewal Current PSI Blueprint and Exam Logistics Practical Kit and Five Timed Demonstrations

Electric Files, Abrasives and Safe Shaping

Key Takeaways Explain This Topic AI

Metal bits and sanding bands are limited to artificial nails in Maryland.

Use nail-purpose devices and attachments intended for the selected material.

Stop for heat or pain and avoid sustained pressure or contact.

Last updated: October 2026

Use a nail-purpose device and supported attachments

An electric file rotates an attachment to shape or refine material. It can remove product efficiently but can also produce heat, grooves, particles and tissue injury. Maryland permits equipment designed for nail services and prohibits substituting craft or hobby drills. A device's ability to spin does not make it suitable for professional nail work.

Read the machine and attachment instructions. The attachment must fit the chuck and be secured correctly. Do not force a mismatched shank or assume every bit fits every device. Inspect for damage, clogging or distortion before use. Stop the machine before changing attachments or performing the maintenance required by its instructions.

Maryland's material restrictions

Maryland limits metal bits and sanding bands to artificial nails. Only attachments specifically designed for nail-plate use are permitted on natural nails under the state's rule. Do not infer that a low speed makes a metal bit permissible on a natural plate. Sanding bands are single use and must not be washed for reuse.

Reusable metal bits require cleaning and disinfection. Remove debris through a compatible process and inspect grooves. Do not assume every attachment tolerates a brass brush or one universal ultrasonic cycle. The cleaning method must fit the attachment and still support the required disinfection.

  • Variable Why it matters
  • Attachment design Determines intended material and technique
  • Rotation direction Must match the bit and controlled movement
  • Speed Follows supported task guidance, not a universal number
  • Pressure Excess can create heat or remove too much material
  • Contact duration Stationary contact can concentrate friction
  • Visibility and support Helps maintain control near tissue
  • Pressure and movement

Support the client's hand or foot and maintain a clear view of the contact point. Use controlled movement and avoid dwelling in one area. Pressure, attachment condition and contact time affect heat; RPM alone does not establish safety. There is no single speed that is safe for every bit, every product and every operator.

Stop immediately if the client reports heat or pain. Inspect the result and reassess technique. Do not reassure the client that burning is normal because the plate is nonliving. The living bed and surrounding tissue can be affected. A ring or groove in the plate is damage, not an acceptable finishing step.

Protect living boundaries

Do not use an attachment to excavate the hyponychium or cut living proximal or lateral folds. Remove only appropriate material within cosmetic scope. A smooth-looking skin border does not justify injury. If tissue is inflamed or an unexplained condition is present, defer rather than refine its appearance.

Use conservative hand filing when appropriate and follow the product's supported procedure. Hand files can also damage tissue if pressure or abrasive selection is inappropriate. The difference between manual and powered tools does not remove the need for inspection and controlled removal.

Dust and eyewear

Use source capture and appropriate ventilation for filing particles. Avoid blowing debris toward the client or open products. Maryland requires protective eyewear for both technician and client when clipping, filing or shaping acrylic nails. Set out and use that protection before beginning the particle-producing task.

Keep reserve supplies protected and chemical containers closed. Clean settled debris from contact surfaces through the required turnover process. A dust collector does not disinfect the tabletop, and a disinfectant does not capture airborne dust. Each control serves a different function.

Maintenance and storage

Clean the nonimmersible handpiece using the manufacturer's compatible method, keeping liquid away from electrical openings. Process attachments separately as required. Store processed bits in protected clean conditions and segregate used ones immediately. A shared bit cup without status separation makes accidental reuse more likely.

Remove a handpiece from service if it vibrates unusually, overheats or has electrical damage. Do not continue at a lower speed to conceal a fault. Qualified maintenance and appropriate replacement protect the client and worker. Equipment history and current condition matter as much as the selected attachment.

Worked legal question

A technician wants to use a metal bit on a natural nail at a very low speed. Maryland's material restriction still applies. Select an attachment specifically permitted and designed for the natural plate, with a supported technique, or use another appropriate method. Low RPM does not create a legal exception.

For theory questions, evaluate tool purpose, attachment suitability, state restrictions and controlled technique in that order. For practical work, demonstrate inspection, safe grip, tissue protection and immediate segregation of used parts. Speed and efficiency are useful only when the service preserves the natural nail and stays within the rules.

Sources: Maryland nail-equipment requirements , OSHA chemical and dust controls .