Study guide
Manicure Procedures, Filing and Cuticle Care
Maryland Nail Technician License Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Pathogens, Hand Hygiene and Exposure Prevention
Pathogens and Disease Transmission Hand Hygiene and Glove Changes Cleaning, Disinfection and Sterilization
2 Chapter 2: Implement Processing and Clean Storage
Processing Contaminated Implements Labeling and Storing Processed Tools Choosing Single-Use and Reusable Supplies
3 Chapter 3: Disinfectants, Labels and Safety Data Sheets
Disinfectant Labels, Dilution and Safety Data Sheets Chemical Labels and Secondary Containers Using Safety Data Sheets
4 Chapter 4: Workstations, Equipment and Footbath Sanitation
Daily Workstation Cleaning and Turnover Cleaning and Maintaining Salon Equipment Footbath Disinfection and Water-System Biofilm
5 Chapter 5: Exposure Response and Chemical Protection
Exposure Incidents and Client Injury Worker Exposure Assessment and Follow-up Adverse Chemical Reactions and Protective Equipment
6 Chapter 6: Safe Salon Conditions and Client Protection
Physical Salon Conditions and Ergonomics Safe Water Temperature and Soaking Electrical Safety at Wet and Dry Stations Client Barriers, Draping and Product Dispensing
7 Chapter 7: Chemical Controls and Regulatory Responsibilities
Chemical Storage, Fire Prevention and Disposal Ventilation and Nail Dust Control OSHA, EPA and FDA Responsibilities MMA, EMA and Chemical Product Safety
8 Chapter 8: Consultation and Nail and Skin Analysis
Intake, Consent, Service Selection and Referral Nail Structure and Growth Skin Structure and Service Analysis
9 Chapter 9: Nail Disorders, Disease and Discoloration
Nail Disorders and Conservative Modifications Suspected Nail Disease and Service Contraindications Discoloration, Moisture Traps and Enhancement Deferral
10 Chapter 10: Skin Reactions and Enhancement Suitability
Skin Disorders, Allergy Testing and Reactions Enhancement Suitability and Contraindications
11 Chapter 11: Massage, Devices and Hot Towels
Cosmetic Hand and Foot Massage Skin-Care Tools and Devices Hot Towel Application and Removal
12 Chapter 12: Skin Products, Paraffin and Callus Care
Skin Products and Maryland Paraffin Procedures Callus Reduction and Prohibited Cutting
13 Chapter 13: Natural Nail Procedures and Filing
Manicure Procedures, Filing and Cuticle Care Pedicure Procedures and Natural Nail Repair Electric Files, Abrasives and Safe Shaping
14 Chapter 14: Chemistry, Adhesion and Tip and Wrap Systems
Nail Product Chemistry and Polymerization Adhesion, Preparation and Primers Nail Tips and Fabric Wrap Repairs
15 Chapter 15: Enhancement Systems, Maintenance and Removal
Liquid-and-Powder Enhancements on Forms Light-Cured Gel Systems and Lamp Matching Dip Powder, Gel Polish and Decorative Products Maintenance, Repair and Solvent Removal
16 Chapter 16: Maryland Licensing and PSI Examinations
Maryland Eligibility, Licensing and Renewal Current PSI Blueprint and Exam Logistics Practical Kit and Five Timed Demonstrations
Manicure Procedures, Filing and Cuticle Care
Key Takeaways Explain This Topic AI
Inspect before shaping and preserve the natural plate and living folds.
Use supported product directions rather than universal coat or grit claims.
The practical basic manicure includes setup, service and cleanup within twenty minutes.
Last updated: October 2026
Organize the service around healthy tissue
A manicure is cosmetic care of the hands and nails. Begin with consultation, inspection and an agreed plan. Confirm whether the nails and skin are suitable before removal, soaking or filing. Pain, open wounds, suspicious infection or unexplained changes can require modification or deferral. A service sequence is not permission to continue regardless of findings.
Wash hands before attending the client and arrange appropriate client-hand cleaning. Use a clean station, a fresh rest covering and properly processed implements. Keep disposable and reusable used-item destinations ready. Set out only what is needed so the technician does not search through clean stock with contaminated hands midway through the service.
Remove and inspect
Remove conventional polish with a suitable product, avoiding unnecessary skin exposure. Existing enhancement products need their supported removal procedure rather than force. Inspect the uncovered plate and folds before selecting the next step. Removal may reveal a condition that changes the plan.
Discuss length and shape. Preserve enough natural structure for comfortable use. Do not narrow sidewalls excessively or cut into attached tissue. A client's desired outline should fit the plate and lifestyle. A shape that looks fashionable is not automatically suitable for every nail.
- Stage Decision to preserve safety
- Consultation Determine suitability before preparation
- Removal Use the correct product and avoid force
- Shaping Preserve plate and sidewall integrity
- Cuticle care Target nonliving material and protect living folds
- Conditioning or massage Use suitable products on intact tissue
- Finish Follow conventional polish or supported gel directions
- Filing and buffing
Choose an abrasive appropriate to the natural nail and product instructions. Grit numbers indicate relative abrasive grade; they are not simply a count of particles per square inch. Avoid declaring one grit universally required or prohibited for every nail step without an applicable source. Control pressure and remove only the material needed.
Support the finger and maintain visibility. Smooth the free edge without cutting into the hyponychium. Surface buffing should not attempt to erase deep grooves or every ridge by thinning the plate. Stop if heat or pain develops. The plate protects sensitive tissue underneath even though it is itself nonliving.
Cuticle care
Distinguish nonliving cuticle adhering to the plate from the living proximal fold. Use an appropriate softening product and gentle technique according to directions. Do not cut deeply into the protective fold or push with excessive force. Inflammation or resistance requires reassessment, not a sharper tool.
Use a nipper only for the appropriate material and supported technique. A tool capable of cutting skin does not make skin removal lawful or necessary. Avoid injury around the matrix, lateral folds and distal seal. If a cut occurs, stop and follow the exposure procedure instead of finishing the manicure before responding.
Conditioning and massage
Apply suitable moisturizer or oil hygienically to intact tissue. Dispense creams with a clean spatula or pump and do not return leftovers to stock. Massage is optional according to the service and client suitability. Do not massage a painful, inflamed or suspicious area or claim to treat a vascular or nerve disorder.
Select comfortable pressure and ask for feedback. The dedicated massage section explains basic strokes and contraindications. A brief massage does not compensate for unsafe filing, a contaminated tool or an ignored lesion. Every service stage needs its own correct handling.
Polish and finishing
Conventional lacquer dries mainly by solvent evaporation. Follow its base, color and top-coat directions instead of assuming exactly four coats for every system. Apply controlled amounts and avoid skin flooding. Explain realistic drying and aftercare without promising that one drying drop instantly hardens the entire film.
Gel polish requires the supported lamp, thickness and cycle for each layer. Do not substitute conventional drying time for curing. Keep uncured product off skin and use the system's finishing instructions. If a product wrinkles, remains inappropriate or causes discomfort, stop and investigate rather than hide it beneath another coat.
Practical basic manicure
PSI's basic manicure task allows twenty minutes, organized as five minutes of setup, ten minutes for service and five minutes for cleanup. Rehearse the current rating criteria with the allowed supplies. Maintain sanitation throughout; a polished result does not excuse contaminating clean tools or leaving waste on the station.
For theory questions, identify the unsafe step in the sequence rather than memorize an inflexible routine. For practical rehearsal, practice inspection, careful shaping, protected tissue and visible turnover. The procedure should remain controlled even when the planned cosmetic finish changes after inspection.
Sources: PSI practical criteria , AAD nail care , Maryland sanitation .