Study guide
Dip Powder, Gel Polish and Decorative Products
Maryland Nail Technician License Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Pathogens, Hand Hygiene and Exposure Prevention
Pathogens and Disease Transmission Hand Hygiene and Glove Changes Cleaning, Disinfection and Sterilization
2 Chapter 2: Implement Processing and Clean Storage
Processing Contaminated Implements Labeling and Storing Processed Tools Choosing Single-Use and Reusable Supplies
3 Chapter 3: Disinfectants, Labels and Safety Data Sheets
Disinfectant Labels, Dilution and Safety Data Sheets Chemical Labels and Secondary Containers Using Safety Data Sheets
4 Chapter 4: Workstations, Equipment and Footbath Sanitation
Daily Workstation Cleaning and Turnover Cleaning and Maintaining Salon Equipment Footbath Disinfection and Water-System Biofilm
5 Chapter 5: Exposure Response and Chemical Protection
Exposure Incidents and Client Injury Worker Exposure Assessment and Follow-up Adverse Chemical Reactions and Protective Equipment
6 Chapter 6: Safe Salon Conditions and Client Protection
Physical Salon Conditions and Ergonomics Safe Water Temperature and Soaking Electrical Safety at Wet and Dry Stations Client Barriers, Draping and Product Dispensing
7 Chapter 7: Chemical Controls and Regulatory Responsibilities
Chemical Storage, Fire Prevention and Disposal Ventilation and Nail Dust Control OSHA, EPA and FDA Responsibilities MMA, EMA and Chemical Product Safety
8 Chapter 8: Consultation and Nail and Skin Analysis
Intake, Consent, Service Selection and Referral Nail Structure and Growth Skin Structure and Service Analysis
9 Chapter 9: Nail Disorders, Disease and Discoloration
Nail Disorders and Conservative Modifications Suspected Nail Disease and Service Contraindications Discoloration, Moisture Traps and Enhancement Deferral
10 Chapter 10: Skin Reactions and Enhancement Suitability
Skin Disorders, Allergy Testing and Reactions Enhancement Suitability and Contraindications
11 Chapter 11: Massage, Devices and Hot Towels
Cosmetic Hand and Foot Massage Skin-Care Tools and Devices Hot Towel Application and Removal
12 Chapter 12: Skin Products, Paraffin and Callus Care
Skin Products and Maryland Paraffin Procedures Callus Reduction and Prohibited Cutting
13 Chapter 13: Natural Nail Procedures and Filing
Manicure Procedures, Filing and Cuticle Care Pedicure Procedures and Natural Nail Repair Electric Files, Abrasives and Safe Shaping
14 Chapter 14: Chemistry, Adhesion and Tip and Wrap Systems
Nail Product Chemistry and Polymerization Adhesion, Preparation and Primers Nail Tips and Fabric Wrap Repairs
15 Chapter 15: Enhancement Systems, Maintenance and Removal
Liquid-and-Powder Enhancements on Forms Light-Cured Gel Systems and Lamp Matching Dip Powder, Gel Polish and Decorative Products Maintenance, Repair and Solvent Removal
16 Chapter 16: Maryland Licensing and PSI Examinations
Maryland Eligibility, Licensing and Renewal Current PSI Blueprint and Exam Logistics Practical Kit and Five Timed Demonstrations
Dip Powder, Gel Polish and Decorative Products
Key Takeaways Explain This Topic AI
Protect master powder supplies and discard client-contact leftovers.
Use supported application and cure instructions for each specialty system.
Decorative methods must not depend on intentionally unsupported under-curing.
Last updated: October 2026
Identify the system behind the service name
Dip powder systems commonly combine a resin, polymer powder and compatible activator or finishing products. Gel polish uses a supported light-curing system. The labels describe different procedures, and their instructions should not be mixed. Some hybrid products differ further, so establish the actual formulation and method before service.
Inspect the client and agree on the cosmetic plan. Do not cover disease concerns, painful damage or unexplained changes with a specialty coating. Review prior reactions and product history. Marketing phrases such as organic, vitamin enriched or healthy nails do not establish medical benefit or freedom from allergy risk.
Hygienic powder handling
Keep the master powder supply protected from client contact. Use a client-specific portion or a hygienic pour-over method, with an appropriately clean scoop and container. Discard powder that has contacted the client or fallen into the service tray rather than return it to stock. A powder's appearance does not show whether contamination occurred.
Avoid calling the entire procedure sterile. The goal is hygienic dispensing and control of contamination, not an unsupported sterility claim. Process reusable dispensing tools as appropriate and discard single-use supplies. Keep brushes and bottle openings from becoming transfer points between client contact and stock.
- System Main supported controls
- Dip powder Hygienic portions, matched resin and activator, controlled placement
- Gel polish Supported base, color, top, lamp and cure cycles
- Chrome or foil Compatible decorative method without intentional unsupported under-curing
- Encapsulated elements Supported structure and no hazardous sharp protrusions
- Gems and charms Compatible attachment, realistic wear and secure edges
- Dip application
Follow the system's preparation, layer placement, activation and finishing directions. Some procedures use staggered layers to build balance, but a universal sequence of distal thirds and exactly two minutes at each step does not fit every product. Keep resin away from skin and avoid excessive bulk near the folds.
Activator chemistry varies. Do not explain every cyanoacrylate system as the same free-radical reaction used by liquid-and-powder acrylic. Use the compatible products and timing. If a brush hardens or the surface behaves unexpectedly, inspect the sequence and product compatibility rather than add an unrelated liquid.
Gel-polish application
Use the supported base and color thickness and cure each required layer in the specified lamp and cycle. Dark colors and different products can have different instructions. Do not transfer one thirty-second cure time to every gel. Keep uncured material off living skin and follow the finishing directions for the selected top coat.
Wrinkling or other unexpected results can indicate a problem with application or curing, but appearance does not identify a universal percentage of raw material underneath. Stop and correct the supported process rather than cover the defect with more product. Review lamp compatibility, placement, thickness and product condition.
Decorative media
Use decorative materials intended for the planned cosmetic application and follow the supported method. Chrome, foils, glitter and encapsulated pieces can affect the system's finishing process. Do not deliberately cure a top coat to an invented eighty-to-ninety-percent level to make pigment adhere. Use a manufacturer-supported decorative procedure that still provides the required cure.
Keep sharp edges or protrusions from creating an injury hazard. Choose a realistic design for the client's activities. Encapsulation and attachment need compatible products and appropriate structure; one universal double top coat does not guarantee security. Do not mount large objects over an unsuitable plate to conceal damage.
Product exposure and cleanup
Protect the client and worker from dust, liquids and skin contact. Close containers between use and keep chemical waste appropriately contained. Where acrylic is clipped, filed or shaped, Maryland requires protective eyewear for both people. Clean settled debris and process used supplies before the next service.
A specialty service does not create a separate sanitation exemption. The same hand hygiene, clean storage, disposal and surface-treatment principles apply. Client-specific portions reduce shared-product contamination but do not remove the need to process tools and the workstation.
Removal and aftercare
Identify the exact system and use its complete supported solvent removal procedure. Maryland prohibits pulling artificial products off. Do not assign one universal ten- or twenty-minute soak time to all dip powders and gel polishes. If material remains resistant, follow the supported reassessment or repeat stage instead of scraping bare plate.
Explain maintenance and warning signs. The client should report lifting, discoloration, pain or skin reactions and avoid home prying or gluing. Specialty finishes are cosmetic, not medical treatment. For exam questions, distinguish hygienic handling, adequate supported curing and safe removal; a fashionable result is acceptable only when those conditions are satisfied.
Sources: FDA nail-product guidance , CND system instructions , Maryland sanitation .