Study guide

Maintenance, Repair and Solvent Removal

Maryland Nail Technician License Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Pathogens, Hand Hygiene and Exposure Prevention

Pathogens and Disease Transmission Hand Hygiene and Glove Changes Cleaning, Disinfection and Sterilization

2 Chapter 2: Implement Processing and Clean Storage

Processing Contaminated Implements Labeling and Storing Processed Tools Choosing Single-Use and Reusable Supplies

3 Chapter 3: Disinfectants, Labels and Safety Data Sheets

Disinfectant Labels, Dilution and Safety Data Sheets Chemical Labels and Secondary Containers Using Safety Data Sheets

4 Chapter 4: Workstations, Equipment and Footbath Sanitation

Daily Workstation Cleaning and Turnover Cleaning and Maintaining Salon Equipment Footbath Disinfection and Water-System Biofilm

5 Chapter 5: Exposure Response and Chemical Protection

Exposure Incidents and Client Injury Worker Exposure Assessment and Follow-up Adverse Chemical Reactions and Protective Equipment

6 Chapter 6: Safe Salon Conditions and Client Protection

Physical Salon Conditions and Ergonomics Safe Water Temperature and Soaking Electrical Safety at Wet and Dry Stations Client Barriers, Draping and Product Dispensing

7 Chapter 7: Chemical Controls and Regulatory Responsibilities

Chemical Storage, Fire Prevention and Disposal Ventilation and Nail Dust Control OSHA, EPA and FDA Responsibilities MMA, EMA and Chemical Product Safety

8 Chapter 8: Consultation and Nail and Skin Analysis

Intake, Consent, Service Selection and Referral Nail Structure and Growth Skin Structure and Service Analysis

9 Chapter 9: Nail Disorders, Disease and Discoloration

Nail Disorders and Conservative Modifications Suspected Nail Disease and Service Contraindications Discoloration, Moisture Traps and Enhancement Deferral

10 Chapter 10: Skin Reactions and Enhancement Suitability

Skin Disorders, Allergy Testing and Reactions Enhancement Suitability and Contraindications

11 Chapter 11: Massage, Devices and Hot Towels

Cosmetic Hand and Foot Massage Skin-Care Tools and Devices Hot Towel Application and Removal

12 Chapter 12: Skin Products, Paraffin and Callus Care

Skin Products and Maryland Paraffin Procedures Callus Reduction and Prohibited Cutting

13 Chapter 13: Natural Nail Procedures and Filing

Manicure Procedures, Filing and Cuticle Care Pedicure Procedures and Natural Nail Repair Electric Files, Abrasives and Safe Shaping

14 Chapter 14: Chemistry, Adhesion and Tip and Wrap Systems

Nail Product Chemistry and Polymerization Adhesion, Preparation and Primers Nail Tips and Fabric Wrap Repairs

15 Chapter 15: Enhancement Systems, Maintenance and Removal

Liquid-and-Powder Enhancements on Forms Light-Cured Gel Systems and Lamp Matching Dip Powder, Gel Polish and Decorative Products Maintenance, Repair and Solvent Removal

16 Chapter 16: Maryland Licensing and PSI Examinations

Maryland Eligibility, Licensing and Renewal Current PSI Blueprint and Exam Logistics Practical Kit and Five Timed Demonstrations

Maintenance, Repair and Solvent Removal

Key Takeaways Explain This Topic AI

Inspect tissue and product condition before filling or repairing.

Maryland requires solvent removal and prohibits pulling artificial products off.

Use each system’s complete removal procedure rather than forcing resistant material.

Last updated: October 2026

Inspect before filling

Maintenance reassesses tissue, product condition and structural balance as the natural nail grows and the enhancement wears. It is not simply adding product wherever new nail appears. Begin with consultation, removal of appropriate finish and inspection. Ask about pain, impact, lifting, discoloration and home repairs.

A lifted border or crack needs evaluation before being covered. Do not glue a gap shut or seal a suspicious change beneath fresh material. Product failure can have several causes, and the underlying tissue may no longer be suitable. Defer and recommend assessment when findings suggest injury, infection or another medical concern.

Rebalancing

Growth moves the enhancement's structure relative to the natural nail. A rebalance restores the intended architecture using the supported system. Shorten or reshape when necessary for appropriate leverage. Preserve natural keratin while reducing product. The procedure depends on the system and observed condition, not one universal two-week or four-week schedule.

Assess the stress area, sidewalls, free edge and proximal transition. Remove unsupported material through the supported method rather than fill over it. Prepare new growth gently and keep reactive product off skin. Use compatible products and the required curing or setting instructions.

  • Maintenance finding Decision
  • Healthy new growth and sound product Perform supported fill or rebalance
  • Lifted border without concerning tissue findings Remove unsupported material appropriately before repair
  • Discoloration, inflammation or pain Reassess, defer concealment and refer as appropriate
  • Product identity unknown Establish safe compatibility and removal
  • Excessive length or changed lifestyle Discuss a realistic shorter structure
  • Crack repair

A cosmetic crack in product is different from a split involving living tissue. Inspect before applying resin or additional enhancement. Do not bridge a painful injury with glue. If the repair is suitable, use the supported system and restore balance rather than merely make the surface look smooth.

Discuss why the crack happened. Excessive length, impact, poor architecture, incompatible products or wear can contribute. Avoid promising that one stronger material eliminates all risk. A durable enhancement can still transfer force to the natural nail and supporting tissue.

Maryland's removal requirement

Maryland's nail-service rule states that artificial products are removed with solvent and never pulled off. A technician should follow a complete supported solvent procedure and preserve the natural plate. Do not pry, peel or wedge product away with a tip, nipper or pusher.

Product identity controls the removal instructions. Some procedures use controlled filing to reduce bulk before solvent treatment; others require a different preparation step. Do not assume all hard gels are solvent-impervious or describe file-only removal as a universal state-law exception. If directions are unclear, resolve the system and applicable guidance before continuing.

A manufacturer-specific example

CND's BRISA removal directions use controlled reduction, leaving a thin protective film, followed by the specified solvent-wrap procedure. Its listed wrap time is forty to sixty minutes for that product method, with reassessment and rewrapping where needed. This is an example, not a time to impose on every gel, acrylic or dip system.

The important reasoning is that resistance to a brief soak does not justify pulling. Follow the exact product's process and check progress without scraping bare natural nail. Keep solvent exposure controlled and away from ignition. Do not heat acetone in a microwave or with a direct heater.

Wraps and soaking

Use compatible containers and materials and the specified remover. Keep the client's skin protected according to the system and monitor discomfort. If the product is not adequately softened, repeat the supported stage rather than force it off. A pusher should not be used as a lever between bonded material and the plate.

Do not claim that soap neutralizes every solvent. After the product has been removed, complete the appropriate cleaning and conditioning process and inspect the tissue. Oils and moisturizers may support cosmetic comfort, but they do not rebuild damaged plate layers instantly or cure a medical disorder.

Post-removal decisions

Assess thickness, sensitivity, attachment and surrounding skin. A client with pain, injury or suspicious changes may need deferral and medical advice instead of immediate reapplication. Explain realistic home care and recommend reporting new pain, swelling or discoloration. Do not guarantee that every damaged nail returns to normal in exactly six months.

Record the products, removal method and relevant findings. This information supports follow-up and can help a clinician investigate a reaction. Avoid unsupported diagnoses in the record. A successful removal preserves tissue rather than leaving every surface cosmetically identical regardless of condition.

Examination scenario

An enhancement remains resistant after a short solvent exposure. The client asks the technician to pry it off to save time. Decline the shortcut, confirm the product and continue only with the supported removal procedure. For theory questions, the correct answer respects solvent directions, state rules and tissue preservation. For practical skills, demonstrate control and inspection instead of force.

Sources: Maryland removal rule , CND BRISA removal instructions .