Study guide

Cleaning and Maintaining Salon Equipment

Maryland Nail Technician License Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Pathogens, Hand Hygiene and Exposure Prevention

Pathogens and Disease Transmission Hand Hygiene and Glove Changes Cleaning, Disinfection and Sterilization

2 Chapter 2: Implement Processing and Clean Storage

Processing Contaminated Implements Labeling and Storing Processed Tools Choosing Single-Use and Reusable Supplies

3 Chapter 3: Disinfectants, Labels and Safety Data Sheets

Disinfectant Labels, Dilution and Safety Data Sheets Chemical Labels and Secondary Containers Using Safety Data Sheets

4 Chapter 4: Workstations, Equipment and Footbath Sanitation

Daily Workstation Cleaning and Turnover Cleaning and Maintaining Salon Equipment Footbath Disinfection and Water-System Biofilm

5 Chapter 5: Exposure Response and Chemical Protection

Exposure Incidents and Client Injury Worker Exposure Assessment and Follow-up Adverse Chemical Reactions and Protective Equipment

6 Chapter 6: Safe Salon Conditions and Client Protection

Physical Salon Conditions and Ergonomics Safe Water Temperature and Soaking Electrical Safety at Wet and Dry Stations Client Barriers, Draping and Product Dispensing

7 Chapter 7: Chemical Controls and Regulatory Responsibilities

Chemical Storage, Fire Prevention and Disposal Ventilation and Nail Dust Control OSHA, EPA and FDA Responsibilities MMA, EMA and Chemical Product Safety

8 Chapter 8: Consultation and Nail and Skin Analysis

Intake, Consent, Service Selection and Referral Nail Structure and Growth Skin Structure and Service Analysis

9 Chapter 9: Nail Disorders, Disease and Discoloration

Nail Disorders and Conservative Modifications Suspected Nail Disease and Service Contraindications Discoloration, Moisture Traps and Enhancement Deferral

10 Chapter 10: Skin Reactions and Enhancement Suitability

Skin Disorders, Allergy Testing and Reactions Enhancement Suitability and Contraindications

11 Chapter 11: Massage, Devices and Hot Towels

Cosmetic Hand and Foot Massage Skin-Care Tools and Devices Hot Towel Application and Removal

12 Chapter 12: Skin Products, Paraffin and Callus Care

Skin Products and Maryland Paraffin Procedures Callus Reduction and Prohibited Cutting

13 Chapter 13: Natural Nail Procedures and Filing

Manicure Procedures, Filing and Cuticle Care Pedicure Procedures and Natural Nail Repair Electric Files, Abrasives and Safe Shaping

14 Chapter 14: Chemistry, Adhesion and Tip and Wrap Systems

Nail Product Chemistry and Polymerization Adhesion, Preparation and Primers Nail Tips and Fabric Wrap Repairs

15 Chapter 15: Enhancement Systems, Maintenance and Removal

Liquid-and-Powder Enhancements on Forms Light-Cured Gel Systems and Lamp Matching Dip Powder, Gel Polish and Decorative Products Maintenance, Repair and Solvent Removal

16 Chapter 16: Maryland Licensing and PSI Examinations

Maryland Eligibility, Licensing and Renewal Current PSI Blueprint and Exam Logistics Practical Kit and Five Timed Demonstrations

Cleaning and Maintaining Salon Equipment

Key Takeaways Explain This Topic AI

Process removable parts and nonimmersible equipment using compatible methods.

Stop using equipment with abnormal heat, vibration or electrical damage.

Maintenance must preserve both sanitation and the intended product performance.

Last updated: October 2026

Equipment creates several kinds of risk

A nail service uses more than handheld implements. Lamps, electric-file handpieces, dust collectors, chairs, footrests and storage units can carry contamination or fail mechanically. Equipment maintenance includes cleaning, compatible disinfection where applicable, inspection and safe operation. A machine that switches on is not necessarily safe or ready for use.

Identify the manufacturer's instructions before establishing the maintenance routine. Some parts can be removed and immersed; others contain motors or electronics that must stay dry. Maryland allows appropriate antimicrobial spray treatment of nonimmersible implements after cleaning, but this does not mean flooding an electrical handpiece with liquid. Use a product and method compatible with the surface and equipment.

Divide equipment into components

Consider an electric file. The bit, chuck, exterior grip, cord and motor housing have different processing needs. Remove a bit according to the equipment instructions. Clean and disinfect reusable metal bits as required. Discard sanding bands after one use. Clean the exterior of the handpiece with a compatible method, keeping fluid out of electrical openings. Check that the bit is securely held before switching on.

A lamp has client-contact surfaces and an optical system. Remove dust and clean contact surfaces without scratching light elements or introducing solvent into electrical parts. Observe the manufacturer's maintenance and replacement directions. Visible light does not prove that the lamp provides the output required by a particular gel. A clean but incompatible lamp can still leave an enhancement inadequately cured.

Component Maintenance question

Removable metal bit Can it be cleaned completely and disinfected by the required process?

Disposable sanding band Has it been discarded after its single use?

Handpiece housing Which cleaning and surface treatment methods are approved?

Dust collector When must the filter be serviced, and how is captured dust contained?

Lamp interior Are surfaces clean and the unit maintained for the selected system?

Chair or footrest Are contact surfaces cleaned between clients?

Inspection before use

Inspect cords for damage, plugs for looseness and housings for cracks. Unusual vibration, excessive heat, a burning smell or intermittent operation is a reason to stop and isolate the device. Do not continue at a lower speed to hide a fault. Do not use makeshift electrical repairs or replace parts with an unapproved component that changes the machine's safe operation.

Examine reusable attachments for wear and contamination. A clogged bit cannot cut evenly and may produce extra friction. A damaged or distorted bit can create vibration and loss of control. Clean according to the attachment's instructions rather than assume every bit tolerates the same metal brush or ultrasonic cycle. There is no universal five-minute ultrasonic requirement for all salon equipment.

For wet equipment, maintain a separate cleaning routine. A footbath's water circuit and removable parts require attention beyond wiping the visible rim. Follow the foot-spa section's after-client and end-of-day process, including label contact time and access to filters or jets as appropriate. A disposable liner does not automatically clean the surrounding bowl or any exposed water system.

Organize maintenance responsibilities

The salon should know who performs each task, when it is due and how a faulty device is removed from service. A checklist can document cleaning and inspection without inventing a particular Maryland record-retention period. Record actual work, not a checkmark entered at opening for tasks that will happen later. Keep operating instructions available to the workers using the equipment.

Plan replacements before running out of filters or compatible parts. If the device needs a particular filter, substituting an improvised fabric pad may impair airflow and protection. Keep vents unobstructed and follow disposal directions for collected dust and contaminated filters. Cleaning the outside of a dust collector does not restore a saturated filter.

Practical case: a hot handpiece

Halfway through reducing an artificial enhancement, the handpiece becomes unusually hot and vibrates. The client has no pain yet. Stop, secure the workstation, unplug or otherwise isolate the unit safely and use an appropriate alternative only after reassessing the service. A worker should not wait for a burn or equipment failure before acting. Record the fault and arrange qualified maintenance.

In another case, a gel lamp looks bright but the manufacturer-required lamp is unavailable. Do not infer compatibility from appearance or wattage. Choose a supported system or postpone that part of the service. Equipment safety includes the chemical result it creates, not only protection from electricity.

For exam questions, separate three decisions: whether the equipment is mechanically sound, whether its surfaces have been appropriately processed, and whether it is suitable for the intended product. All three must be satisfied. Successful practical work shows controlled handling, clean contact surfaces and prompt action when an item is contaminated or unsafe.

Sources: Maryland sanitation , OSHA chemical controls , CND system instructions .