Study guide

1.3 Legal Descriptions and Surveys

Maine Real Estate Salesperson Exam

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

How This Guide Maps to the Maine Salesperson Exam

2 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use

1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances

3 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title

2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording

4 National Portion: Chapter 3: Property Value & Appraisal

3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs

5 National Portion: Chapter 4: Real Estate Contracts & Agency

4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure

6 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)

5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management

7 National Portion: Chapter 6: Property Disclosures & Environmental Issues

6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability

8 National Portion: Chapter 7: Financing & Settlement

7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations

9 National Portion: Chapter 8: Real Estate Math Calculations

8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math

10 Chapter 1: Maine Real Estate Commission & Licensing

1.1 Maine Real Estate Commission (MREC) 1.2 Maine License Requirements 1.3 License Maintenance and Renewal

11 Chapter 2: Agency & Disclosure

2.1 Maine Agency Relationships 2.2 Maine Disclosure Requirements

12 Chapter 3: Contracts & Property

3.1 Maine Contract Requirements 3.2 Maine Property Disclosures 3.3 Maine Land Use, Water Law & Transfer Tax

13 Chapter 4: Trust Accounts & Violations

4.1 Maine Trust Account Requirements 4.2 License Law Violations & Discipline

1.3 Legal Descriptions and Surveys

Key Takeaways Explain This Topic AI

Three accepted methods describe land: metes and bounds (POB, bearings, distances), lot and block (recorded plat), and rectangular government survey (township, range, section).

A metes-and-bounds description must close by returning to the point of beginning, or it is invalid.

A township is 6 by 6 miles and holds 36 sections; one section is 1 square mile equal to 640 acres.

Quarter-section math: a section is 640 acres, so a quarter is 160 acres and a quarter of a quarter is 40 acres.

Surveys reveal boundaries, easements, setbacks, and encroachments and are commonly required for financing.

Last updated: June 2026

A legal description identifies a parcel so precisely that no other land on earth fits it. Street addresses can change and are never sufficient; every valid deed must contain a legal description. Three methods are accepted nationwide.

1) Metes and Bounds

This method walks the boundary using distances ( metes ) and directions or landmarks ( bounds ) starting from a fixed point of beginning (POB) .

A typical line reads: "Beginning at the iron pin, thence N 30 degrees E 200 feet, thence due east 150 feet ..."

The description must close , returning to the exact POB. A description that does not close is invalid.

It is the oldest method and is used for irregular parcels and in states without the rectangular survey.

2) Lot and Block (Recorded Plat)

Used in subdivisions, this method references a recorded subdivision map called a plat . The description cites a lot number, a block number, and the subdivision name, for example, "Lot 7, Block 3, Sunny Acres Subdivision."

Easy to read and verify in public records.

Relies on a survey that was recorded when the subdivision was platted.

3) Rectangular (Government) Survey

This system divides land using principal meridians (north-south lines) and base lines (east-west lines) into a grid.

A township measures 6 miles by 6 miles.

Each township is divided into 36 sections .

Each section is 1 mile by 1 mile, which equals 640 acres .

Range lines run north-south; township tiers run east-west, locating each township on the grid.

Acreage Math You Must Know

Start from the constant that one section equals 640 acres and divide by the fractions in the description.

  • Fraction of a section Acres
  • Full section 640
  • 1/2 section 320
  • 1/4 section 160
  • 1/8 section 80
  • 1/16 section 40

Worked example: "The SE 1/4 of the NW 1/4 of Section 12." Multiply the fractions: 1/4 times 1/4 equals 1/16. Then 640 times 1/16 equals 40 acres .

Second example: "The N 1/2 of the NE 1/4." That is 1/2 times 1/4 equals 1/8, and 640 times 1/8 equals 80 acres . When fractions are separated by "of," multiply them, then multiply by 640.