Study guide
2.2 Cleaning & Disinfection Methods for Tools, Machines & Workstations
Michigan Cosmetology Licensing Exam Study Guide 2026
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Michigan Licensing Path
1.1 Michigan Cosmetologist Licensing Path 1.2 PSI National Theory Exam (Guide v1.2, Effective 5/20/26) 1.3 Fees, Renewal, Reciprocity & Score Window
2 Infection Control Fundamentals
2.1 Infectious Diseases, Pathogens & Exposure Prevention 2.2 Cleaning & Disinfection Methods for Tools, Machines & Workstations 2.3 Levels of Decontamination: Cleaning, Disinfection & Sterilization 2.4 Exposure Incidents & Universal/Standard Precautions
3 Disinfectants, Labeling & Multi-Use Items
3.1 Products for Cleaning & Disinfecting 3.2 Labeling & Storage of Cleaned and Disinfected Tools 3.3 Single-Use vs Multi-Use Items & Materials
4 Workplace Safety Precautions
4.1 Safe Working Conditions, Water Temperature & Equipment 4.2 Chemical Labeling, Storage & Safety Data Sheets 4.3 Federal Safety Regulations: OSHA, EPA & FDA 4.4 Client Draping, Ventilation, Electrical Safety & Adverse Reactions
5 Client Consultation & Consent
5.1 Client Intake, Consent & Contraindication Screening 5.2 Declining or Altering Services & Medical Referral 5.3 Patch Testing & Signs of Adverse Reactions
6 Hair, Skin & Nail Structure and Analysis
6.1 Hair, Skin & Nail Structure 6.2 Analysis & Selecting Appropriate Services 6.3 Recognizing Adverse Conditions Before Service
7 Diseases, Disorders & Service Contraindications
7.1 Hair & Scalp Diseases and Disorders 7.2 Skin Diseases and Disorders 7.3 Nail Diseases and Disorders 7.4 Manicure, Pedicure & Nail Enhancement Contraindications
8 Hairstyling Procedures & Tools
8.1 Textured Styling, Extensions, Braiding & Locking 8.2 Blow-Drying, Thermal Curling & Tool Safety
9 Haircutting Procedures & Tool Safety
9.1 Haircutting Procedures for Different Hair Types 9.2 Safe Use of Shears, Razors, Clippers & Trimmers
10 Haircoloring Application & Color Theory
10.1 Haircolor Application, Strand Testing & Scalp Prep 10.2 Color Theory, Formulating & Product Types 10.3 Lightening Products & Safe Use
11 Special Haircolor Situations & Chemical Mixing Safety
11.1 Facial Hair Color, Overprocessed Hair & Metallic/Compound Dyes 11.2 Hair Chemical Mixing & Color Safety Procedures
12 Chemical Texture Services
12.1 Chemical Texture on Virgin Hair 12.2 Chemical Texture on Chemically Treated Hair 12.3 Texture Safety, Products & Assessing Results
13 Skin Care Services
13.1 Safe Facial, Manicure & Pedicure Massage Movements 13.2 Client Prep, Skin Care Products & Scalp Treatments 13.3 Skin Care Safety: Exfoliation, Devices, Hot Towels & Calluses
14 Eyelash & Eyebrow Services
14.1 Safe Application & Removal of Eyelash Enhancements 14.2 Chemical Eyelash & Eyebrow Services
15 Hair Removal Services
15.1 Depilatories, Waxing & Sugaring 15.2 Tweezing, Threading, Tools & Supplies 15.3 Infection Control & Contraindications for Hair Removal
16 Nail Care Services
16.1 Nail Safety: Filing, Buffing, Cuticles, Manicure & Pedicure 16.2 Nail Workstation Ventilation & Infection Control 16.3 Natural Nail Care & Artificial Nail Enhancements
17 Chemical Service Sequencing & Client Protection
17.1 Sequencing Color and Texture Services Safely 17.2 Client Protection During Chemical Services
18 Exam Strategy & Test Day
18.1 Study Plan by Domain Weight 18.2 Practical Awareness for Theory Candidates 18.3 Test Day, Score Reporting & One-Year Score Window
2.2 Cleaning & Disinfection Methods for Tools, Machines & Workstations
Key Takeaways Explain This Topic AI
Michigan's Mich. Admin. Code R 338.2171a requires removing all visible debris before any disinfectant is applied to a tool or surface.
Non-electrical tools must be disinfected by full immersion in a wet sanitizer for at least 10 minutes, or by scrubbing all surfaces with a disinfectant wipe or spray.
Electrical tool cords and motor housings must never be submerged; only removable parts are immersed or wiped.
Towels, capes, and neck strips require machine washing in water of at least 160°F for at least 25 minutes, unless laundered commercially.
Semi-solid products like wax and cream must be dispensed with a clean or single-use spatula to prevent cross-contamination between clients.
Last updated: July 2026
Why Michigan's Exact Sequence Matters
PSI outline area A.2 tests methods and procedures for cleaning and disinfection across three categories: contaminated tools, machines and equipment, and the daily workstation. Michigan is not vague about this — Mich. Admin. Code R 338.2171a spells out a required, sequential procedure for nearly every surface and tool in a licensed establishment, and PSI writes theory questions directly from it.
The Universal First Step: Remove Visible Debris
Every category in R 338.2171a begins the same way: remove all visible debris before any disinfectant touches the item. Disinfectants are tested and registered by the EPA to kill pathogens on a clean surface — hair clippings, skin cells, or product residue can shield pathogens from the chemical and cause the disinfection step to fail even if the correct product and contact time are used.
Non-Electrical Tools (Combs, Brushes, Metal Implements)
After debris removal, non-electrical tools not intended for disposal must be disinfected by one of two EPA-registered methods:
Full immersion in a wet sanitizer for not less than 10 minutes , or the time stated on the disinfectant's manufacturer label, whichever is longer
Scrubbing all surfaces with a disinfectant wipe or spray and a clean towel
The tool is then fully air-dried or towel-dried before reuse or storage. A tool pulled out of a wet sanitizer at the 6-minute mark, even if it "looks clean," has not met Michigan's disinfection requirement.
Electrical Tools and Machines
Electrical equipment such as clippers and trimmers follows the same two-method disinfection choice for removable parts — immersion or scrub-and-wipe — but the cord, housing, and motor of the tool itself must never be submerged. After disinfecting and fully drying, electrical items must be stored in a clean place such as a stand or hook; an electrical item with a cord may not be stored in the same container used for other clean tools, since cords can re-contaminate the bin.
Workstation Surfaces (Chairs, Headrests, Tables, Shampoo Bowls)
Surfaces that contact a patron's skin — chairs, headrests, tables, and beds — are disinfected after every use by removing debris, then scrubbing all surfaces with a disinfectant wipe or spray and a clean towel . Shampoo bowls follow the identical scrub-and-wipe procedure after each client; neither is required to be soaked, since neither can be immersed.
Special Cases: Basins, Linens, and Brushes
- Item Required Method Minimum Time
- Pedicure basin Drain, remove debris, circulate disinfectant, then drain/rinse/dry 10 minutes circulation
- Basin screen/removable parts Immersion or scrub-and-wipe, then rinse and dry 10 minutes if immersed
- Towels, capes, neck strips Machine wash in detergent 160°F water, 25-minute wash/rinse cycle
- Plastic/nylon capes Scrub with disinfectant wipe or spray No soak required
- Neck/nail dusters and brushes Immerse in wet sanitizer 10 minutes
- Natural fiber, acrylic, gel, nail-art, makeup brushes Fully immerse in wet sanitizer 10 minutes
A basin with a disposable liner that prevents water and skin from touching the basin itself is exempt from the 10-minute disinfection cycle — but any screen or other removable part that does contact water or skin still must be disinfected.
Semi-Solid Products: Waxes, Creams, and Powders
Waxes, creams, lotions, oils, and powders must be stored in a covered container and removed with a clean or single-use spatula that is disposed of after each patron — unless the product is dispensed from a shaker or pump that never lets skin touch the container. This single rule generates a large share of PSI's "spot the violation" scenario questions: a technician dipping fingers into an open wax pot, or reusing a spatula across two clients without disinfecting it, is exactly the exposure risk this rule targets.
Reading Manufacturer Instructions
Every disinfectant and sterilant used in a Michigan establishment must have its manufacturer-labeled container available on-site, and if the manufacturer's recommended contact time is longer than Michigan's 10-minute minimum, the manufacturer's time controls . PSI exam items sometimes test this directly by giving a product label time longer than 10 minutes and asking which time actually applies.
How Often: Between Every Single Client
Every procedure in R 338.2171a is described as happening "after each use on a patron," not on a schedule such as once per hour or once at the end of the day. A comb, cape, or chair that has touched one client must be fully cleaned and disinfected before it touches the next client — even if the same client is returning later that day for an unrelated service, and even if a tool still looks clean. PSI frequently frames a distractor answer around a plausible-sounding schedule ("once per shift," "at closing") to test whether candidates know the true standard is after each patron, with no exceptions for how busy the salon is.
Common PSI Trap Scenarios
A stylist wipes a chair with a wipe that is not EPA-registered as a disinfectant — this fails the standard because the product itself must carry EPA disinfectant registration, not just claim to "clean" or "sanitize"
A technician immerses a metal implement in a wet sanitizer for only 5 minutes because the salon is busy — this fails the 10-minute (or longer, per label) minimum contact time
A nail technician stores a freshly disinfected electric file in the same drawer as a corded electrical tool that was also just disinfected — the corded item is stored incorrectly and can re-contaminate the drawer
A shampoo assistant leaves visible hair in the shampoo bowl and applies disinfectant spray directly over it — debris was never removed first, so the disinfectant cannot reliably reach the surface underneath