Study guide
10.2 Licensure, Examination Eligibility, Retakes & Continuing Education
Michigan Journeyman Electrician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & NEC General Requirements
1.1 Michigan LARA Electrical Licensing & Exam Format 1.2 NEC Article 90 & Code Structure 1.3 NEC Article 100 Essential Definitions 1.4 NEC Article 110 General Installation Requirements
2 Chapter 2: Branch Circuits & Outlets
2.1 Branch Circuit Ratings & Conductor Sizing 2.2 GFCI Protection Requirements (NEC 210.8) 2.3 AFCI & Tamper-Resistant Outlets (NEC 210.12 & 406.12) 2.4 Receptacle Outlets & Dwelling Unit Spacing (NEC 210.52 & 210.11) 2.5 Switches, Receptacles & Wiring Devices (NEC Articles 404 & 406)
3 Chapter 3: Load Calculations for Services & Feeders
3.1 General Lighting & Receptacle Load Calculations 3.2 Fixed Appliance, Dryer, & Cooking Unit Loads 3.3 Dwelling Unit Service & Feeder Calculations 3.4 Commercial & Non-Dwelling Load Calculations
4 Chapter 4: Wiring Methods, Conductors & Insulation
4.1 Conductor Types & Ampacity Sizing 4.2 Ampacity Adjustment & Correction Factors 4.3 Cable Assemblies (NM-B, MC, UF) 4.4 Raceways & Flexible Conduits (EMT, RMC, PVC, FMC)
5 Chapter 5: Conduit Fill, Box Fill & Panelboards
5.1 Raceway Fill Calculations 5.2 Outlet & Junction Box Sizing (NEC 314.16(A)) 5.3 Box Fill Volume Deductions (NEC 314.16(B)) 5.4 Panelboards, Switchboards & Cabinets (NEC Article 408)
6 Chapter 6: Overcurrent Protection Devices & Tap Rules
6.1 Fuses & Circuit Breakers (NEC Article 240) 6.2 Small Conductor Rules & Protection Limits (NEC 240.4(D)) 6.3 Feeder & Transformer Tap Rules (NEC 240.21) 6.4 Location, Enclosures & Overcurrent Protection Accessibility
7 Chapter 7: Grounding & Bonding Systems
7.1 Grounding Electrode Systems & Electrodes (NEC 250.50 & 250.52) 7.2 Grounding Electrode Conductor (GEC) Sizing (NEC Table 250.66) 7.3 Equipment Grounding Conductors (EGC) Sizing (NEC Table 250.122) 7.4 Bonding Requirements & Main Bonding Jumpers
8 Chapter 8: Motors, Generators & Transformers
8.1 Motor Full-Load Current (FLA) & Conductor Sizing (NEC Article 430) 8.2 Motor Short-Circuit & Ground-Fault Protection (Table 430.52) 8.3 Motor Overload Protection & Disconnecting Means 8.4 Transformer Sizing, Protection & Installation (NEC Article 450)
9 Chapter 9: Special Occupancies, Equipment & Conditions
9.1 Hazardous (Classified) Locations (NEC Articles 500-516) 9.2 Commercial Garages, Service Stations & Healthcare Facilities (Articles 511, 514, 517) 9.3 Swimming Pools, Fountains & Equipotential Bonding (NEC Article 680) 9.4 Renewable Energy Systems & Generators (NEC Articles 690, 700, 702)
10 Chapter 10: Michigan Electrical Law, Rules & Code Administration
10.1 Skilled Trades Regulation Act: License Classes, Scope & Supervision 10.2 Licensure, Examination Eligibility, Retakes & Continuing Education 10.3 Michigan Electrical Code Part 8 Rules & the 2023 NEC Adoption 10.4 Michigan Amendments & Key 2023 NEC Changes Enforced in Michigan 10.5 Stille-DeRossett-Hale Act, Permits, Inspections & the AHJ
11 Chapter 11: Electrical Theory & General Trade Knowledge
11.1 Ohm's Law, Power Formulas & Series/Parallel Circuits 11.2 Alternating Current, Single-Phase & Three-Phase Systems 11.3 Power Factor, Efficiency & Transformer Theory 11.4 Voltage Drop, Conductor Resistance & Trade Math
12 Chapter 12: Services & Feeders (Articles 230 & 215)
12.1 Service Conductors, Clearances & Service-Entrance Requirements 12.2 Service Disconnecting Means, Overcurrent Protection & Service Grounding 12.3 Feeders: Sizing, Overcurrent Protection & Article 215 Requirements
13 Chapter 13: Lighting, Appliances & Power-Limited Circuits
13.1 Luminaires & Lighting Installations (NEC Article 410) 13.2 Appliances & Fixed Electric Space Heating (NEC Articles 422 & 424) 13.3 Class 1, Class 2 & Class 3 Power-Limited Circuits (Articles 724 & 725) 13.4 Fire Alarm, Communications & Optical Fiber Systems (Articles 760, 770, 800-820)
10.2 Licensure, Examination Eligibility, Retakes & Continuing Education
Key Takeaways Explain This Topic AI
MCL 339.5715(1) requires a journeyman applicant to be at least 20 years old and to hold 8,000 hours of experience obtained over a period of at least 4 years under the direct supervision of an individual licensed under the electrical article.
MCL 339.5715(1)(b) creates a military route requiring honorable discharge within the 1-year period preceding application plus an affidavit attesting to 8,000 hours of entry-level experience in ten enumerated knowledge areas.
MCL 339.5715(2) permits the department to grant discretionary partial credit toward the 8,000-hour requirement where a military applicant falls short of the full experience or knowledge list.
MCL 339.5715(3) bars an applicant who fails the journeyman examination twice within a 2-year period from retesting for at least 1 year, and then only on proof of a board-approved course on the Michigan electrical code, electrical fundamentals, or electrical theory.
MCL 339.5715(4) conditions renewal on completing a board-approved course covering any update or change to the state construction code within 12 months after that change, and applies only during or after years in which the code is updated.
Last updated: August 2026
10.2 Licensure, Examination Eligibility, Retakes & Continuing Education
Exam Focus: MCL 339.5715 in full — age, the 8,000-hour rule, the military affidavit and its ten knowledge areas, discretionary credit, the two-failure bar, and the code-update renewal condition — plus the BCC-to-PSI application workflow.
Section 715 of the Skilled Trades Regulation Act is the single most quotable statute for a Michigan journeyman candidate, because it governs whether you may sit, what happens if you fail, and what you must do every code cycle to keep the license.
Eligibility: MCL 339.5715(1)(a)
The department shall issue an electrical journeyman's license to an individual who:
Is at least 20 years old ;
Meets the general requirements described in article 2 of the Occupational Code (application, fees, good moral character, and similar administrative requirements); and
Has at least 8,000 hours of experience obtained over a period of at least 4 years related to electrical construction or maintenance of buildings, or electrical wiring or equipment, under the direct supervision of an individual who is licensed under this article . +-------------------------------------------------------------------------+
- | THE THREE NUMBERS IN MCL 339.5715(1)(a) |
- | |
- | AGE ...................... at least 20 years old |
- | HOURS .................... at least 8,000 hours of experience |
- | ELAPSED TIME ............. obtained over a period of at least 4 years |
- | |
- | Both the hour count AND the elapsed period must be satisfied. |
- | 8,000 hours crammed into 2 years does not qualify. |
- +-------------------------------------------------------------------------+
Important
Two traps in one sentence. First, the hours and the elapsed period are independent requirements — you cannot compress 8,000 hours into two years of heavy overtime and qualify. Second, the supervising individual must be "licensed under this article," which means a journeyman or a master , not a master only.
The Military Route: MCL 339.5715(1)(b) and (2)
An applicant qualifies by military service if all of the following are true:
The applicant served on active duty as an interior electrician or in an equivalent job classification ;
The applicant was honorably discharged in the 1-year period preceding the date the license application is filed ; and
The applicant files an affidavit signed by a commanding officer, supervisor, or military superior with direct knowledge of the service, stating at least 8,000 hours of entry-level experience in and basic knowledge of each of the following ten areas:
# Knowledge Area Required by the Affidavit
i General knowledge of the electrical trade, including terminology and the ability to make practical calculations
ii System and circuit grounding, and design and use requirements for grounding, including choosing proper size grounding conductors
iii Circuit classifications and ratings, and design and use requirements for circuits, including branch-circuit loads
iv Determination of ampacity, type of insulation, usage requirements, methods of installation, protection, support, and termination
v Installation of motors and control circuits
vi Calculation of electrical loads and determination of proper size, rating, and type of service and feeder conductors
vii Fuses, circuit breakers, and all types of protective devices for conductors and equipment
viii All types of raceways and their uses, including proper size, conductor fill, support, and methods of installation
ix Circuits and equipment characterized by usage and electrical power limitations, including differentiating them from electric light and power circuits
x All types and applications of lighting fixtures, ratings, requirements for occupancies, special provisions, and clearances
MCL 339.5715(2) covers the partial case: if the applicant has not reached 8,000 hours or lacks basic knowledge in one or more of areas (i) through (x), the affidavit may state what the applicant has attained, and the department may in its discretion grant credit toward the 8,000-hour requirement based on that experience.
Study note: Read list (i) through (x) again. It is effectively the legislature's own summary of the journeyman body of knowledge — grounding, circuits, ampacity, motors, load calculations, protective devices, raceways and fill, power-limited circuits, and lighting. It maps almost one-to-one onto the PSI subject list.
Two Different Retake Restrictions
Candidates routinely confuse these. They come from different sources and both apply.
Restriction Source Effect
2 attempts within 1 year PSI Candidate Information Bulletin Master, journeymen, and sign specialist candidates are limited to 2 attempts within 1 year. Once the attempt limit or the time limit is exceeded, you must reapply with the state to become eligible again.
1-year bar plus remedial course MCL 339.5715(3) If an applicant fails the journeyman examination 2 times within a 2-year period , the applicant is ineligible to sit again until at least 1 year after the date of the second failure , and then only on presenting the board proof of successful completion of a board-approved course on the Michigan electrical code, electrical fundamentals, or electrical theory.
Note also that the $100 examination fee is not refundable or transferable and is valid for one year from the date of payment , and that fire alarm specialty technician and contractor candidates have unlimited attempts within one year — the two-attempt cap does not apply to them.
Continuing Education as a Renewal Condition: MCL 339.5715(4)
As a condition of renewing an electrical journeyman's license, the licensee must demonstrate successful completion of a board-approved course concerning any update or change in the state construction code within 12 months after that update or change. The statute adds an important limiter: this requirement applies only during or after those years in which the state construction code is updated or changed.
That is why Michigan's continuing education obligation is tied to the code cycle rather than to a fixed annual hour count. When Michigan adopted the 2023 NEC through the Part 8 rules, licensees were required to complete an approved code-update course; the BCC tracks completions through CE Broker.
The Application Workflow
Apply to LARA/BCC. Only the State of Michigan determines your eligibility. Applications go to the Bureau of Construction Codes, Licensing Division, in Lansing.
Receive approval and an ID number. The department notifies you and transmits your eligibility to PSI.
Pay and schedule with PSI. Create an account, enter the ID number the BCC provided, choose a site and date. Fee $100.
Test. Arrive 30 minutes early with one valid, unexpired, government-issued photo ID whose first and last name match your registration exactly.
Receive your score on screen. A failing report includes a diagnostic breakdown of strengths and weaknesses.
Caution
Missed appointment rules forfeit the fee. You forfeit the $100 if you do not cancel at least 2 days before the scheduled date, do not appear, arrive after the start time, or cannot present proper identification.