Study guide

10.1 Skilled Trades Regulation Act: License Classes, Scope & Supervision

Michigan Journeyman Electrician Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & NEC General Requirements

1.1 Michigan LARA Electrical Licensing & Exam Format 1.2 NEC Article 90 & Code Structure 1.3 NEC Article 100 Essential Definitions 1.4 NEC Article 110 General Installation Requirements

2 Chapter 2: Branch Circuits & Outlets

2.1 Branch Circuit Ratings & Conductor Sizing 2.2 GFCI Protection Requirements (NEC 210.8) 2.3 AFCI & Tamper-Resistant Outlets (NEC 210.12 & 406.12) 2.4 Receptacle Outlets & Dwelling Unit Spacing (NEC 210.52 & 210.11) 2.5 Switches, Receptacles & Wiring Devices (NEC Articles 404 & 406)

3 Chapter 3: Load Calculations for Services & Feeders

3.1 General Lighting & Receptacle Load Calculations 3.2 Fixed Appliance, Dryer, & Cooking Unit Loads 3.3 Dwelling Unit Service & Feeder Calculations 3.4 Commercial & Non-Dwelling Load Calculations

4 Chapter 4: Wiring Methods, Conductors & Insulation

4.1 Conductor Types & Ampacity Sizing 4.2 Ampacity Adjustment & Correction Factors 4.3 Cable Assemblies (NM-B, MC, UF) 4.4 Raceways & Flexible Conduits (EMT, RMC, PVC, FMC)

5 Chapter 5: Conduit Fill, Box Fill & Panelboards

5.1 Raceway Fill Calculations 5.2 Outlet & Junction Box Sizing (NEC 314.16(A)) 5.3 Box Fill Volume Deductions (NEC 314.16(B)) 5.4 Panelboards, Switchboards & Cabinets (NEC Article 408)

6 Chapter 6: Overcurrent Protection Devices & Tap Rules

6.1 Fuses & Circuit Breakers (NEC Article 240) 6.2 Small Conductor Rules & Protection Limits (NEC 240.4(D)) 6.3 Feeder & Transformer Tap Rules (NEC 240.21) 6.4 Location, Enclosures & Overcurrent Protection Accessibility

7 Chapter 7: Grounding & Bonding Systems

7.1 Grounding Electrode Systems & Electrodes (NEC 250.50 & 250.52) 7.2 Grounding Electrode Conductor (GEC) Sizing (NEC Table 250.66) 7.3 Equipment Grounding Conductors (EGC) Sizing (NEC Table 250.122) 7.4 Bonding Requirements & Main Bonding Jumpers

8 Chapter 8: Motors, Generators & Transformers

8.1 Motor Full-Load Current (FLA) & Conductor Sizing (NEC Article 430) 8.2 Motor Short-Circuit & Ground-Fault Protection (Table 430.52) 8.3 Motor Overload Protection & Disconnecting Means 8.4 Transformer Sizing, Protection & Installation (NEC Article 450)

9 Chapter 9: Special Occupancies, Equipment & Conditions

9.1 Hazardous (Classified) Locations (NEC Articles 500-516) 9.2 Commercial Garages, Service Stations & Healthcare Facilities (Articles 511, 514, 517) 9.3 Swimming Pools, Fountains & Equipotential Bonding (NEC Article 680) 9.4 Renewable Energy Systems & Generators (NEC Articles 690, 700, 702)

10 Chapter 10: Michigan Electrical Law, Rules & Code Administration

10.1 Skilled Trades Regulation Act: License Classes, Scope & Supervision 10.2 Licensure, Examination Eligibility, Retakes & Continuing Education 10.3 Michigan Electrical Code Part 8 Rules & the 2023 NEC Adoption 10.4 Michigan Amendments & Key 2023 NEC Changes Enforced in Michigan 10.5 Stille-DeRossett-Hale Act, Permits, Inspections & the AHJ

11 Chapter 11: Electrical Theory & General Trade Knowledge

11.1 Ohm's Law, Power Formulas & Series/Parallel Circuits 11.2 Alternating Current, Single-Phase & Three-Phase Systems 11.3 Power Factor, Efficiency & Transformer Theory 11.4 Voltage Drop, Conductor Resistance & Trade Math

12 Chapter 12: Services & Feeders (Articles 230 & 215)

12.1 Service Conductors, Clearances & Service-Entrance Requirements 12.2 Service Disconnecting Means, Overcurrent Protection & Service Grounding 12.3 Feeders: Sizing, Overcurrent Protection & Article 215 Requirements

13 Chapter 13: Lighting, Appliances & Power-Limited Circuits

13.1 Luminaires & Lighting Installations (NEC Article 410) 13.2 Appliances & Fixed Electric Space Heating (NEC Articles 422 & 424) 13.3 Class 1, Class 2 & Class 3 Power-Limited Circuits (Articles 724 & 725) 13.4 Fire Alarm, Communications & Optical Fiber Systems (Articles 760, 770, 800-820)

10.1 Skilled Trades Regulation Act: License Classes, Scope & Supervision

Key Takeaways Explain This Topic AI

The Skilled Trades Regulation Act, 2016 PA 407, defines a master electrician as an individual qualified to supervise the installation of electrical wiring and equipment, and an electrical journeyman as an individual who performs that installation work.

MCL 339.5703 defines minor repair work as electrical wiring having a value of $100.00 or less, and a jobsite as the immediate work area within the property lines of a single construction, alteration, or maintenance project.

Michigan issues four individual electrical credentials — electrical journeyman, master electrician, fire alarm specialty technician, and sign specialist — plus contractor licenses for electrical, fire alarm, and sign specialty work.

An electrical contractor license requires a qualifying master electrician, and a single master electrician's license cannot simultaneously satisfy the qualifying-individual requirement for multiple electrical contractor licenses (MCL 339.5713).

Act 407 took effect April 4, 2017 and absorbed the former Electrical Administrative Act, 1956 PA 217; the electrical administrative board created by that former act continues in existence under MCL 339.5705.

Last updated: August 2026

10.1 Skilled Trades Regulation Act: License Classes, Scope & Supervision

Exam Focus: MCL 339.5701–339.5739, the statutory definitions in 339.5703, the four individual electrical credentials, contractor licensure and the qualifying master electrician, and the scope boundaries between journeyman, master, and specialty licenses.

The PSI Candidate Information Bulletin says the journeyman examination tests "an individual's knowledge of the skilled trades regulation act, any rules promulgated under the skilled trades regulation act." Most candidates spend all their preparation inside the NEC and none inside Act 407. That is a mistake — the act is one of only four references you are allowed to bring, and it is short enough to read in an evening.

What Act 407 Is

2016 PA 407 , the Skilled Trades Regulation Act , is codified at MCL 339.5101 and following , with the electrical article at MCL 339.5701 through 339.5739 . It took effect April 4, 2017 . The act consolidated Michigan's separate trade licensing statutes — plumbing, mechanical, boiler, elevator, and electrical — into one chapter of the Occupational Code. The former Electrical Administrative Act, 1956 PA 217 , was folded in; its electrical administrative board was preserved by MCL 339.5705 and is designated "the board" for the electrical article.

Statutory Definitions You Are Expected to Know (MCL 339.5703)

Term Statutory Definition

Master electrician An individual who has the necessary qualifications, training, experience, and technical knowledge to supervise the installation of electrical wiring and equipment in accordance with the standard rules and regulations governing that work

Jobsite The immediate work area within the property lines of a single construction, alteration, or maintenance project where electrical construction or alteration of electrical wiring is in progress

Minor repair work Electrical wiring that has a value of $100.00 or less

Outline lighting An arrangement of incandescent lamps or electric discharge tubing that is an integral part of an electric sign and outlines a feature such as the shape of a building or the decoration of a window

Sign specialist An individual whose principal occupation is the installation, alteration, or repair of electric signs

Related wiring The portion of electric sign wiring that originates at the load-side terminals of a disconnecting means in the vicinity of the sign — it does not include installing that disconnecting means or its line-side connections

Important

The $100 line matters. Because "minor repair work" is defined by dollar value rather than by task, an exam item can describe a small repair and ask whether licensure or a permit is triggered. Read the value , not the difficulty of the work.

The Michigan Electrical Credentials +-------------------------------------------------------------------------+

  • | MICHIGAN ELECTRICAL LICENSE STRUCTURE |
  • | |
  • | INDIVIDUAL LICENSES BUSINESS / CONTRACTOR LICENSES |
  • | -------------------- ----------------------------- |
  • | Electrical Journeyman <----> Electrical Contractor |
  • | Master Electrician <----> Fire Alarm Contractor |
  • | Fire Alarm Specialty Tech <----> Sign Specialty Contractor |
  • | Sign Specialist |
  • | |
  • | A contractor license requires a QUALIFYING MASTER (or the equivalent |
  • | specialty licensee) who is responsible for the firm's installations. |
  • +-------------------------------------------------------------------------+
  • Journeyman vs. Master — the Functional Test

The statute draws the line at supervision , not at skill:

A journeyman engages in the practical installation or alteration of electrical wiring and equipment.

A master has the qualifications to supervise installation, and is the individual a contracting firm relies on to answer for code compliance.

A master electrician may of course perform installation work as well; the license is additive. But only the master may serve as the responsible supervising individual.

Contractor Licensure and the Qualifying Master

An electrical contractor license authorizes a person to engage in the business of erecting, installing, altering, repairing, servicing, or maintaining electrical wiring, devices, appliances, or equipment. Under MCL 339.5713 , the contractor must have a master electrician who qualifies the license, and a single master electrician's license cannot satisfy the qualifying requirement for more than one electrical contractor license at the same time . This prevents one master's credential from being rented out across several firms.

The Specialty Credentials

Fire alarm specialty technician — installs, alters, and repairs fire alarm systems and related wiring. Note that the fire alarm examination is a separate PSI examination with its own question count and its own subject list.

Sign specialist — an individual whose principal occupation is electric sign work. The "related wiring" definition above draws the exact boundary: the sign specialist owns the wiring downstream of the sign disconnect ; installing the disconnect and its line-side connections is electrical work.

Supervision and the Jobsite

The supervision rules are why the "jobsite" definition exists. Supervision obligations are measured per jobsite , and the definition confines a jobsite to the immediate work area within the property lines of a single project . Two buildings on separate parcels are two jobsites even if one contractor is running both; a large campus under one property description is one.

Caution

Common distractor. Items will offer a plausible-sounding definition of jobsite based on distance ("within one mile"), travel time, or "within sight." The statute uses property lines of a single project . Pick the statutory language.

Where This Shows Up on the Exam

Definition matching — master electrician, minor repair work, jobsite, outline lighting, related wiring.

Scope questions — which licensee may legally perform a described task, and which credential the firm needs.

Qualifying-master questions — whether one master can qualify two contractor licenses (no).

Article-boundary questions — sign work under Article 600 versus building wiring, using the "related wiring" definition as the dividing line.

Because you are permitted to bring a bound copy of 2016 PA 407 into the examination, the winning technique is to know the layout of the act — definitions in the 5703 range, board in 5705, license requirements in the 5707–5719 range — so you can find a definition in seconds without tabs, which are not permitted in the printed documents.