Study guide
10.5 Stille-DeRossett-Hale Act, Permits, Inspections & the AHJ
Michigan Journeyman Electrician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & NEC General Requirements
1.1 Michigan LARA Electrical Licensing & Exam Format 1.2 NEC Article 90 & Code Structure 1.3 NEC Article 100 Essential Definitions 1.4 NEC Article 110 General Installation Requirements
2 Chapter 2: Branch Circuits & Outlets
2.1 Branch Circuit Ratings & Conductor Sizing 2.2 GFCI Protection Requirements (NEC 210.8) 2.3 AFCI & Tamper-Resistant Outlets (NEC 210.12 & 406.12) 2.4 Receptacle Outlets & Dwelling Unit Spacing (NEC 210.52 & 210.11) 2.5 Switches, Receptacles & Wiring Devices (NEC Articles 404 & 406)
3 Chapter 3: Load Calculations for Services & Feeders
3.1 General Lighting & Receptacle Load Calculations 3.2 Fixed Appliance, Dryer, & Cooking Unit Loads 3.3 Dwelling Unit Service & Feeder Calculations 3.4 Commercial & Non-Dwelling Load Calculations
4 Chapter 4: Wiring Methods, Conductors & Insulation
4.1 Conductor Types & Ampacity Sizing 4.2 Ampacity Adjustment & Correction Factors 4.3 Cable Assemblies (NM-B, MC, UF) 4.4 Raceways & Flexible Conduits (EMT, RMC, PVC, FMC)
5 Chapter 5: Conduit Fill, Box Fill & Panelboards
5.1 Raceway Fill Calculations 5.2 Outlet & Junction Box Sizing (NEC 314.16(A)) 5.3 Box Fill Volume Deductions (NEC 314.16(B)) 5.4 Panelboards, Switchboards & Cabinets (NEC Article 408)
6 Chapter 6: Overcurrent Protection Devices & Tap Rules
6.1 Fuses & Circuit Breakers (NEC Article 240) 6.2 Small Conductor Rules & Protection Limits (NEC 240.4(D)) 6.3 Feeder & Transformer Tap Rules (NEC 240.21) 6.4 Location, Enclosures & Overcurrent Protection Accessibility
7 Chapter 7: Grounding & Bonding Systems
7.1 Grounding Electrode Systems & Electrodes (NEC 250.50 & 250.52) 7.2 Grounding Electrode Conductor (GEC) Sizing (NEC Table 250.66) 7.3 Equipment Grounding Conductors (EGC) Sizing (NEC Table 250.122) 7.4 Bonding Requirements & Main Bonding Jumpers
8 Chapter 8: Motors, Generators & Transformers
8.1 Motor Full-Load Current (FLA) & Conductor Sizing (NEC Article 430) 8.2 Motor Short-Circuit & Ground-Fault Protection (Table 430.52) 8.3 Motor Overload Protection & Disconnecting Means 8.4 Transformer Sizing, Protection & Installation (NEC Article 450)
9 Chapter 9: Special Occupancies, Equipment & Conditions
9.1 Hazardous (Classified) Locations (NEC Articles 500-516) 9.2 Commercial Garages, Service Stations & Healthcare Facilities (Articles 511, 514, 517) 9.3 Swimming Pools, Fountains & Equipotential Bonding (NEC Article 680) 9.4 Renewable Energy Systems & Generators (NEC Articles 690, 700, 702)
10 Chapter 10: Michigan Electrical Law, Rules & Code Administration
10.1 Skilled Trades Regulation Act: License Classes, Scope & Supervision 10.2 Licensure, Examination Eligibility, Retakes & Continuing Education 10.3 Michigan Electrical Code Part 8 Rules & the 2023 NEC Adoption 10.4 Michigan Amendments & Key 2023 NEC Changes Enforced in Michigan 10.5 Stille-DeRossett-Hale Act, Permits, Inspections & the AHJ
11 Chapter 11: Electrical Theory & General Trade Knowledge
11.1 Ohm's Law, Power Formulas & Series/Parallel Circuits 11.2 Alternating Current, Single-Phase & Three-Phase Systems 11.3 Power Factor, Efficiency & Transformer Theory 11.4 Voltage Drop, Conductor Resistance & Trade Math
12 Chapter 12: Services & Feeders (Articles 230 & 215)
12.1 Service Conductors, Clearances & Service-Entrance Requirements 12.2 Service Disconnecting Means, Overcurrent Protection & Service Grounding 12.3 Feeders: Sizing, Overcurrent Protection & Article 215 Requirements
13 Chapter 13: Lighting, Appliances & Power-Limited Circuits
13.1 Luminaires & Lighting Installations (NEC Article 410) 13.2 Appliances & Fixed Electric Space Heating (NEC Articles 422 & 424) 13.3 Class 1, Class 2 & Class 3 Power-Limited Circuits (Articles 724 & 725) 13.4 Fire Alarm, Communications & Optical Fiber Systems (Articles 760, 770, 800-820)
10.5 Stille-DeRossett-Hale Act, Permits, Inspections & the AHJ
Key Takeaways Explain This Topic AI
The Stille-DeRossett-Hale Single State Construction Code Act, 1972 PA 230, is the statute under which LARA promulgates the Michigan construction code, including the Part 8 electrical rules, and it is a permitted reference in the examination room.
Section 4 of the act, MCL 125.1504, is the authority under which the department adopts the construction code by rule, and the PSI bulletin names any code adopted under that section as tested content.
Section 8a of the act, MCL 125.1508a, governs the administration and enforcement procedures of an adopted code, and the bulletin names those procedures as tested content.
Michigan operates a single state construction code: under the act's structure a local jurisdiction enforces the state code rather than adopting its own stricter or weaker electrical requirements.
Inspectors apply the code edition in effect when the permit was issued, not the edition current at the time of inspection, which is why the March 12, 2024 effective date of the 2023 Part 8 rules matters for projects that span the transition.
Last updated: August 2026
10.5 Stille-DeRossett-Hale Act, Permits, Inspections & the AHJ
Exam Focus: 1972 PA 230 and its role in the code hierarchy, MCL 125.1504 (adoption of the code by rule), MCL 125.1508a (administration and enforcement), the single state construction code principle, permits and inspections, and the code-edition-at-permit rule.
The PSI bulletin lists this act by name: the journeyman examination tests knowledge of "the Stille-DeRossett-Hale single state construction code act, any code adopted under section 4 of that act, MCL 125.1504, any code adopted under section 8a of that act, MCL 125.1508a, and the theory relative to those codes." You may bring a bound copy of 1972 PA 230 into the examination room.
Where the Act Sits in the Hierarchy
Michigan's electrical requirements come from two statutes doing two different jobs:
Statute Job
2016 PA 407 — Skilled Trades Regulation Act Regulates people and firms : who may perform electrical work, licensure, examination, discipline
1972 PA 230 — Stille-DeRossett-Hale Single State Construction Code Act Regulates the work itself : authorizes the state construction code, including the Part 8 electrical rules, and its administration and enforcement +-------------------------------------------------------------------------+
- | MICHIGAN ELECTRICAL AUTHORITY — TWO TRACKS |
- | |
- | WHO MAY DO THE WORK WHAT THE WORK MUST MEET |
- | ------------------------ ------------------------ |
- | 2016 PA 407 1972 PA 230 |
- | Skilled Trades Regulation Act Stille-DeRossett-Hale Act |
- | | | |
- | v v |
- | Electrical administrative board Construction code by rule |
- | Journeyman / master / specialty MCL 125.1504 (section 4) |
- | licensure, exams, discipline | |
- | v |
- | Part 8 Electrical Code rules |
- | R 408.30801 - R 408.30880 |
- | | |
- | v |
- | Administration & enforcement |
- | MCL 125.1508a (section 8a) |
- +-------------------------------------------------------------------------+
- Section 4 — MCL 125.1504: Adoption of the Code
Section 4 is the rulemaking authority . The rules that make up the Michigan Electrical Code recite it: "By authority conferred on the director of the department of licensing and regulatory affairs by section 4 of the Stille-DeRossett-Hale single state construction code act, 1972 PA 230, MCL 125.1504, and Executive Reorganization Order Nos. 2003-1, 2008-4, and 2011-4."
Practical consequences you should be able to state:
The code is a rule, not a statute. It is promulgated through the Administrative Procedures Act — draft rules, public hearing, comment period, filing with the Secretary of State.
Rules take effect on a date certain. Proposed construction code rules take effect a set period after filing with the Secretary of State; the 2023 Part 8 rules were filed November 13, 2023 and became effective March 12, 2024.
Rulemaking is continuous. LARA maintains an open-rules process; drafts and hearing notices for Part 8 are published by the Bureau of Construction Codes.
Section 8a — MCL 125.1508a: Administration and Enforcement
Section 8a governs how an adopted code is administered and enforced — the permit, plan review, inspection, notice, and approval machinery. NEC Article 80 contains model versions of these same provisions, which is precisely why Rule 801 of the Part 8 rules excludes NEC sections 80.2, 80.5, 80.15, 80.23, 80.27, 80.29, 80.31, 80.33, and 80.35. Michigan does not need NFPA's model administration because it has its own.
The Enforcement Chain
Permit. Electrical work requires a permit issued by the enforcing agency having jurisdiction, applied for by the licensed contractor or, in limited circumstances, by a homeowner for their own residence.
Inspection. Rough-in and final inspections are performed by the electrical inspector.
Approval and connection. Utility connection follows inspection approval.
Violations. Notices of violation, stop work, and administrative penalties flow through the enforcing agency, with licensure consequences handled separately under Act 407.
The Single State Construction Code Principle
The act's name states its central policy: Michigan has one construction code. The enforcing agency in a municipality administers the state code; it does not write its own electrical code with stricter or looser requirements, and it cannot grant exceptions to the state code.
Caution
Distinguish code from registration. Some Michigan municipalities — Detroit and Grand Rapids are the usual examples — require electricians to register locally before working in the city. That is a local licensing/registration requirement, not a local electrical code. The technical requirements remain the Michigan Electrical Code everywhere in the state.
Which Code Edition Applies?
The inspector applies the code edition in effect at the time the permit was issued , not the edition current at the time of inspection.
Scenario Governing Edition
Permit issued March 1, 2024; final inspection August 2024 The prior Part 8 rules — the permit predates March 12, 2024
- Permit issued April 1, 2024 The 2023 Michigan Electrical Code
- New permit application filed today The current adopted edition
This is why the filing-versus-effective distinction is more than trivia. Between November 13, 2023 and March 12, 2024, the 2023 Part 8 rules existed and could be used for training , but were not enforceable .
The AHJ in Practice
Recall from Section 10.3 that R 408.30810 adds section 80.13, defining the authority having jurisdiction to include the electrical inspector or other individuals designated by the governing body . Under NEC 90.4, the AHJ has the authority to:
- Interpret the rules of the code;
- Approve equipment, materials, and installations;
- Grant special permission — express written consent;
Waive specific requirements or permit alternative methods where equivalent objectives of safety are achieved.
Exam tip: "Special permission" is defined in Article 100 as the written consent of the AHJ. If an answer option describes verbal approval from an inspector as special permission, it is wrong.