Study guide

8.3 Mechanical Exfoliation: Microdermabrasion & Dermaplaning

Michigan Esthetician Licensing Exam Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Michigan Licensing Law & the LARA Board of Cosmetology

1.1 Michigan Licensing Requirements & LARA Board Oversight 1.2 The Michigan Esthetician Theory Examination Blueprint 1.3 The Michigan Esthetician Practical Examination 1.4 Michigan Statutory Scope of Practice for Estheticians 1.5 Michigan Establishment Standards & the Disinfection Rules 1.6 Michigan Prohibitions, Blood Spills, Renewal & Enforcement

2 Chapter 2: Safety, Microbiology & Infection Control (40% of the exam)

2.1 Microbiology: Pathogenic Bacteria & Viral Pathogens 2.2 Fungal, Parasitic & Biofilm Hazards in Esthetics 2.3 The Three Levels of Decontamination & EPA Registration 2.4 Disinfectant Chemistry, Immersion Protocol & Sterilization 2.5 OSHA, the Globally Harmonized System & Safety Data Sheets 2.6 Standard Precautions, Exposure Incidents & Sharps Handling 2.7 Safe Working Conditions: Water Temperature, Ventilation & Electrical Safety 2.8 Labeling & Storage of Chemicals, Protective Barriers & Client Draping 2.9 Single-Use vs. Multi-Use Items & Daily Workstation Control

3 Chapter 3: Skin Anatomy, Histology & Physiology

3.1 Histology & Cellular Layers of the Epidermis 3.2 Structure & Architecture of the Dermis and Subcutaneous Layer 3.3 Physiological Functions of the Skin & Appendages

4 Chapter 4: Skin Disorders, Diseases & Lesions

4.1 Primary & Secondary Skin Lesions 4.2 Sebaceous & Sudoriferous Gland Disorders 4.3 Melanocyte Biology & Pigmentation Disorders 4.4 Skin Cancer Recognition, ABCDE Screening & Medical Contraindications

5 Chapter 5: Client Consultation & Skin Analysis (19% of the exam)

5.1 Client Consultation, Health History & Intake Documentation 5.2 Declining or Altering a Service & Referring for a Medical Opinion 5.3 Allergic Reaction (Patch) Test Procedures 5.4 Fitzpatrick Classification, Skin Types & Photoaging Scales 5.5 Diagnostic Tools & Skin Analysis Procedures

6 Chapter 6: Esthetic Chemistry, Ingredients & Product Science

6.1 Chemistry Fundamentals, the pH Scale & the Acid Mantle 6.2 Solutions, Suspensions, Emulsions & Surfactant Chemistry 6.3 Active Ingredients: Hydroxy Acids, Retinoids & Peptides 6.4 Sunscreens, Botanical Actives & Delivery Technologies

7 Chapter 7: Skin Care — Facial Treatments, Hot Towels & Massage (17% of the exam)

7.1 Treatment Room Setup, Supplies & Ergonomics 7.2 The Classical Facial Protocol & Steamer Safety 7.3 Safe Application & Removal of Hot Towels and Steam 7.4 Extraction Mechanics, Michigan Scope Limits, Masks & Home Care 7.5 Classic Facial Massage Movements & Physiological Benefits

8 Chapter 8: Advanced Modalities & Safe Exfoliation

8.1 Chemical Peel Mechanism, Depth Classification & Peeling Agents 8.2 Peel Protocol, Pre-Peel Conditioning & Post-Peel Management 8.3 Mechanical Exfoliation: Microdermabrasion & Dermaplaning 8.4 Electrotherapy, High Frequency & Light Therapy Modalities

9 Chapter 9: Hair Removal (15% of the exam)

9.1 Hair Growth Biology, Epilation vs. Depilation & Wax Chemistry 9.2 Pre-Wax Screening, Temperature Safety, Brow Design & the Michigan Wax Rule 9.3 Alternative Temporary Hair Removal: Sugaring, Threading & Tweezing 9.4 Permanent Hair Removal Technologies & Clinical Safety

10 Chapter 10: Makeup, Lash & Brow Services and Spa Business

10.1 Color Theory & Corrective Makeup Application 10.2 Makeup Safety & Hygiene: Bracing, Palettes and Disposable Applicators 10.3 Eyelash Extensions, Lash Lifts & Brow Enhancements 10.4 Spa Business Operations, Retail & Professional Ethics

8.3 Mechanical Exfoliation: Microdermabrasion & Dermaplaning

Key Takeaways Explain This Topic AI

Mechanical exfoliation physically abrades, shears, and sloughs off dead corneocytes from the stratum corneum without chemical denaturation, improving cutaneous micro-relief, product absorption, and cellular renewal.

Crystal microdermabrasion propels inert aluminum oxide (corundum) or sodium bicarbonate crystals via vacuum suction, while diamond-tip systems use abrasive wands (75-200 grit) with calibrated negative suction (10-20 inHg) to achieve controlled desquamation.

Clinical microdermabrasion technique requires non-dominant hand skin traction and a dual-directional cross-hatch pattern (horizontal and vertical passes); over-passes or lost contact can cause petechiae, ecchymosis, or streak bruising.

Dermaplaning is a precise manual epidermal exfoliation technique utilizing a sterile, single-use #10 or #14 surgical blade on a #3 handle held at a strict 45-degree angle against taut skin to abrade the stratum corneum and remove vellus hair.

Under Michigan Act 299 / PA 160, dermaplaning is authorized as a noninvasive, non-cutting epidermal exfoliation service; blades must be discarded immediately into an OSHA-approved sharps container, and active inflammatory acne or open lesions are strict contraindications.

Last updated: August 2026

Mechanical Exfoliation: Microdermabrasion & Dermaplaning

Mechanical exfoliation is a core clinical modality in professional esthetics that physically abrades and removes the non-viable layers of the stratum corneum. Unlike chemical exfoliation—which relies on biochemical bonds being cleaved by acids—mechanical exfoliation utilizes kinetic friction, abrasive surfaces, and controlled suction or surgical shearing to slough away dead corneocytes. When performed with proper technique, mechanical modalities immediately refine surface texture, clear follicular impactions, stimulate microcirculation, enhance transdermal active penetration, and trigger basal cell proliferation without extensive post-treatment downtime.

1. Fundamentals of Mechanical Exfoliation

The primary objective of mechanical exfoliation is the controlled removal of 15% to 30% of the outermost stratum corneum layers. MECHANICAL EXFOLIATION BIOMECHANICS

  • [ Mechanical Friction / Shearing ] ──► [ Stratum Corneum Corneocyte Sloughing ]
  • │
  • ┌──────────────────────────────────────────┴──────────────────────────────────────────┐
  • ▼ ▼
  • ┌──────────────────────────────────────────┐ ┌──────────────────────────────────────────┐
  • │ EPIDERMAL RENEWAL RESPONSE │ │ VASCULAR & CELLULAR RESPONSE │
  • ├──────────────────────────────────────────┤ ├──────────────────────────────────────────┤
  • │ • Immediate stratum corneum thinning │ │ • Negative vacuum stimulates micro- │
  • │ • Enhances topical active permeability │ │ vascular blood and lymph circulation │
  • │ • Signals basal layer keratinocyte │ │ • Increases local oxygenation and │
  • │ mitosis and epidermal turnover │ │ cellular nutrient delivery │
  • └──────────────────────────────────────────┘ └──────────────────────────────────────────┘

By mechanically removing the hyperkeratotic surface barrier, the esthetician diminishes the diffusion distance for topical serums, stimulates dermal microvascular blood supply, and encourages natural desquamation dynamics.

2. Microdermabrasion Systems: Crystal vs. Diamond-Tip

Professional microdermabrasion devices fall into two primary engineering categories: crystal-based projection systems and diamond-encrusted abrasive wands. MICRODERMABRASION SYSTEM ARCHITECTURES

  • CRYSTAL MICRODERMABRASION DIAMOND-TIP MICRODERMABRASION
  • ┌─────────────────────────────────┐ ┌─────────────────────────────────┐
  • │ Pressurized Air + Crystal Flow │ │ Motorized Vacuum Wand Assembly │
  • │ ┌───────────┐ ┌───────────┐ │ │ ┌─────────────┐ │
  • │ │ Fresh │ │ Spent │ │ │ │ Disposable │ │
  • │ │ Crystal │ │ Waste │ │ │ │ Foam/Cotton │ │
  • │ │ Canister │ │ Canister │ │ │ │ Filter │ │
  • │ └─────┬─────┘ └─────▲─────┘ │ │ └──────┬──────┘ │
  • │ │ │ │ │ │ │
  • │ ▼ │ │ │ ▼ │
  • │ [ Dual-Lumen Handpiece ] │ │ [ Diamond-Encrusted Wand ] │
  • │ Aluminum Oxide (Corundum) │ │ Variable Grit (75 to 200) │
  • │ propels at skin & vacuums │ │ Direct abrasive contact │
  • │ debris into closed chamber │ │ with negative suction │
  • └─────────────────────────────────┘ └─────────────────────────────────┘
  • 1. Crystal Microdermabrasion

Mechanism : Utilizes a closed-loop pneumatic system. Pressurized air propels a controlled stream of fine, inert mineral crystals through a handpiece nozzle onto the skin, simultaneously using vacuum suction to evacuate the spent crystals and exfoliated epidermal debris into a sealed waste container.

Abrasive Media :

Aluminum Oxide (Corundum) : The industry standard. Corundum crystals are chemically inert, insoluble, extremely hard (9.0 on the Mohs hardness scale), and have sharp, irregular edges that provide uniform abrasive cutting without causing allergic sensitization.

Sodium Bicarbonate (Baking Soda) : Softer crystals (2.5 on Mohs scale), water-soluble, and less aggressive. Ideal for sensitive or reactive skin types.

Clinical Considerations : Requires client eye shields and strict mucosal protection to avoid crystal aspiration or ocular abrasion. Tubing and canisters must be sealed and maintained to prevent particulate clogging.

2. Diamond-Tip Microdermabrasion

Mechanism : A particle-free system featuring a stainless-steel wand tipped with industrial diamond chips of varying coarseness. The wand is drawn across the skin while an internal motorized vacuum pulls the epidermal tissue against the abrasive diamond surface and draws exfoliated debris into a disposable filter.

Grit Sizes :

Coarse Grit (75–100 grit) : Used for thick, hyperkeratotic, resilient skin, body exfoliation, or deep photoaging.

Medium Grit (120–150 grit) : Standard for normal, combination, and mildly photodamaged facial skin.

Fine Grit (180–200 grit) : Selected for thin, delicate, sensitive facial areas or periorbital/perioral passes.

Vacuum Calibration : Suction pressure is measured in inches of mercury (inHg) or kilopascals (kPa). Standard facial parameters range from 10 to 20 inHg (30 to 70 kPa). Higher vacuum increases suction traction, bringing tissue into firmer contact with the diamond tip, which intensifies exfoliation depth.

  • Feature Crystal Microdermabrasion Diamond-Tip Microdermabrasion
  • Abrasive Medium Loose Aluminum Oxide / Sodium Bicarbonate Diamond-encrusted stainless steel wand
  • Operating Method Pressurized particulate spray + vacuum Direct manual contact friction + vacuum

Airborne Particles High risk of loose dust; requires eye/mouth shielding Zero airborne dust particles; cleaner operation

Customizability Adjusted via air pressure and crystal flow rate Adjusted via wand grit (75–200) and vacuum level

Hygiene Protocol Single-use canisters/tubing; dispose of waste Autoclave or high-level disinfect wand; discard filter

  • Periorbital Use Higher risk of loose crystal migration to eye Safe for close periorbital passes (fine grit)
  • 3. Clinical Microdermabrasion Technique & Protocols

Achieving uniform mechanical exfoliation without causing tissue trauma requires precise hand positioning, proper stroke cadence, and structured pass patterns. CROSS-HATCH PASS TECHNIQUE & SKIN TRACTION

  • HORIZONTAL PASS (First Pass) VERTICAL PASS (Second Pass)
  • ┌──────────────────────────────┐ ┌──────────────────────────────┐
  • │ ══════════════════════════► │ │ ▲ ▲ ▲ ▲ │
  • │ ◄══════════════════════════ │ │ │ │ │ │ │
  • │ ══════════════════════════► │ │ │ │ │ │ │
  • │ ◄══════════════════════════ │ │ ▼ ▼ ▼ ▼ │
  • └──────────────────────────────┘ └──────────────────────────────┘
  • ◄─── Non-dominant Hand: Holds skin firmly TAUT (Three-Point Traction) ───►
  • ◄─── Dominant Hand: Holds wand at 90° angle, maintaining constant contact ──►
  • Step-by-Step Procedure

Sanitization & Degreasing : Cleanse the skin thoroughly to remove all surface lipids, makeup, and debris. The skin must be completely dry before starting; residual moisture will cause the diamond wand to skip or crystals to clump.

Three-Point Skin Traction : Using the non-dominant thumb and index finger, stretch the target skin section firmly taut. Critical Rule: Never apply microdermabrasion to loose, untensioned skin. Loose skin is easily pulled into the vacuum orifice, causing bruising, petechiae, and epidermal tearing.

Perpendicular Wand Placement : Position the wand tip flat against the skin at a 90-degree angle to establish an airtight vacuum seal.

Cross-Hatch Pattern :

Pass 1 (Horizontal) : Glide the wand across the treatment zone in smooth, continuous, overlapping horizontal strokes.

Pass 2 (Vertical) : Perform a second pass perpendicular to the first in vertical strokes. This cross-hatch pattern ensures uniform coverage without leaving un-exfoliated streaks.

Stroke Dynamics : Maintain steady, fluid movement. Never pause, linger, or hover the wand in one spot while suction is active. Lingering causes localized capillary rupture ( petechiae ) or ecchymosis.

Clinical Endpoint : The desired endpoint is uniform, mild erythema (rosy flush) and smooth epidermal texture. Stop immediately if streaking, pinpoint bleeding, or intense localized redness appears.

Indications & Contraindications

Indications Strict Contraindications

  • Epidermal hyperkeratosis and rough texture; • Fine lines and superficial rhytids; • Post-inflammatory hyperpigmentation (PIH); • Dull, devitalized, sallow complexion; • Non-inflamed open and closed comedones; • Superficial, shallow post-acne scarring • Active inflamed acne (Grade III & IV pustules/cysts) ; • Active Herpes Simplex (cold sores) ; • Telangiectasias, rosacea, or erythrosis ; • Fragile, thin, atrophic skin or active eczema/psoriasis ; • Recent Oral Isotretinoin (Accutane) within 6–12 months ; • Undiagnosed skin lesions or open wounds

4. Dermaplaning: Manual Epidermal Exfoliation

Dermaplaning (also known as epidermal blading or leveling) is a specialized manual exfoliation modality that utilizes a sterile, single-use surgical blade to gently scrape away the outermost layers of the stratum corneum while simultaneously removing fine vellus hair (peach fuzz). DERMAPLANING BIOMECHANICS & BLADE ANGLE

  • Direction of Stroke ──►
  • \
  • \ #10 Surgical Blade
  • \
  • Blade Angle: EXACTLY 45°
  • ─────────────────────\──────────────────────
  • Stratum Corneum \\\\\\ ◄── Corneocyte Shaving
  • ──────────────────────\\\\\─────────────────
  • Vellus Hair Removed ───\\\► | Living Epidermis
  • ────────────────────────────┴───────────────
  • Basal Layer & Living Cells (Untouched)
  • ════════════════════════════════════════════
  • Michigan Scope of Practice & Statutory Authorization

Michigan names dermaplaning in statute. MCL 339.1210(2)(e) , as amended by Public Act 160 of 2024 (effective April 2, 2025), authorises "exfoliating only the dead skin cells of an individual, including, but not limited to, in the performance of dermaplaning or microdermabrasion ," using "a product, chemical, mechanical device, electrical service, or class 1 medical device." MCL 339.1210(3) then confines the service to the stratum corneum . Dermaplaning is therefore lawful for a licensed Michigan esthetician provided:

The service is performed strictly for cosmetic epidermal smoothing and vellus hair removal.

The blade does not cut into the vascular living dermis or draw blood.

The esthetician has received verified theoretical and hands-on practical training in sterile blade handling and bloodborne pathogen safety.

Instrumentation & Blade Architecture

Surgical Handle : Standard #3 surgical handle (stainless steel or autoclavable).

Blades :

#10 Blade : Features a broad, curved cutting belly. This is the most common blade in esthetics, providing smooth, safe glide over facial contours.

#14 Blade : Slightly larger, rounded edge blade favored for broad expanses (cheeks, forehead).

Composition : High-grade sterile carbon steel (stays sharpest) or surgical stainless steel.

5. Step-by-Step Dermaplaning Protocol & Sharps Safety

Dermaplaning demands extreme focus, steady motor control, and strict compliance with universal precautions. DERMAPLANING PROTOCOL WORKFLOW

  • ┌────────────────┐ ┌────────────────┐ ┌────────────────┐ ┌────────────────┐
  • │ 1. PREPARE & │───►│ 2. SKIN │───►│ 3. BLADE │───►│ 4. DISPOSAL IN │
  • │ DEGREASE │ │ TRACTION │ │ EXFOLIATION │ │ SHARPS │
  • │ Double cleanse │ │ Non-dominant │ │ Hold blade at │ │ Discard blade │
  • │ & dry face; │ │ hand holds skin│ │ EXACT 45° │ │ immediately in │
  • │ degrease skin │ │ glass-taut in │ │ angle; perform │ │ OSHA container │
  • │ with toner │ │ opposite dir. │ │ short strokes │ │ using hemostat │
  • └────────────────┘ └────────────────┘ └────────────────┘ └────────────────┘
  • Procedural Execution

Skin Preparation : Cleanse the face twice to eliminate all makeup and sebum. Apply an astringent or witch hazel prep toner to completely degrease and dry the skin. Crucial: Dermaplaning must be performed on completely dry skin. Wet or slippery skin will cause the blade to skip, catch, or nick the tissue.

Blade Mounting : Using a sterile hemostat (needle holder/forceps) or safety blade remover, remove the sterile #10 blade from its foil packet and securely slide it onto the #3 surgical handle until it clicks locked into the groove. Never use fingers to attach or remove blades.

Tension & Angle Calibration :

Skin Traction : Place the non-dominant hand firmly behind the treatment stroke, pulling the skin glass-taut in the direction opposite the blade movement.

Blade Angle : Position the blade at an exact 45-degree angle relative to the skin surface.

Stroke Execution :

Execute short, light, feathering strokes (approximately 0.5 to 1 inch in length) moving in the direction of hair growth or against the grain depending on area contour.

Maintain light, uniform contact pressure. Allow the sharp edge of the blade to shave the tissue; never press down into the skin.

Angle Errors to Avoid :

90-Degree Angle (Perpendicular) : Catches and gouges the tissue, causing incisions and bleeding.

0-Degree Angle (Flat) : Glides over hair and stratum corneum without exfoliating.

Anatomical Mapping : Work systematically across quadrants: Forehead → \rightarrow → Temples → \rightarrow → Cheeks → \rightarrow → Upper Lip → \rightarrow → Chin → \rightarrow → Jawline. Avoid the eyelid skin, vermilion lip margin, nose tip, and active acne lesions.

Immediate Sharps Disposal : When the procedure is complete, use a hemostat or blade-removal box to eject the blade immediately into an OSHA-approved, puncture-resistant, labeled Biohazard Sharps Container . Never dispose of surgical blades in regular salon trash bins.

Post-Dermaplaning Soothing : Apply a soothing hyaluronic acid or peptide serum, followed by a ceramide-rich barrier balm and broad-spectrum physical SPF 30+. Inform the client that vellus hair will grow back with the exact same physiological texture, color, and density; dermaplaning does not alter follicular genetics or induce coarse terminal hair growth.

Dermaplaning Contraindications

Active Inflamed Acne : Grade II, III, or IV acne with pustules or cysts. Gliding a sharp blade over an inflamed pustule will rupture the follicle wall, spread bacterial pathogens ( C. acnes ), and cause scarring.

Active Herpes Simplex (Cold Sores) : Risk of autoinoculation and spreading viral lesions across the face.

Bleeding Disorders & Anticoagulant Therapy : Hemophilia, warfarin, or high-dose aspirin therapy.

Uncontrolled Diabetes : Compromised microcirculation and impaired wound healing.

Open Lesions, Active Eczema, or Psoriasis .

Real-World Clinical Scenario: Cross-Hatch Microdermabrasion on Photodamaged Skin

Scenario: A 45-year-old male client with thick, resilient, Fitzpatrick Type II skin presents with visible solar keratosis, dull hyperkeratosis, and coarse epidermal texture. The esthetician selects diamond-tip microdermabrasion. She configures the machine with a medium-coarse 100-grit diamond tip and sets the vacuum to 14 inHg.

Clinical Execution & Troubleshooting:

Traction Technique : On the right cheek, the esthetician establishes firm three-point traction with her non-dominant fingers and completes the first pass in steady horizontal strokes. She immediately follows with a second pass in vertical strokes (cross-hatch pattern).

Observation & Adjustment : Moving to the neck and submandibular jawline, the esthetician notices the skin is significantly thinner and more mobile. When she starts a pass, the wand begins pulling the tissue upward into the vacuum tube, creating a slight purple vascular mark.

Corrective Response : She immediately lifts the wand, changes the diamond tip to a fine 180-grit wand, reduces the vacuum suction to 8 inHg, and increases her non-dominant manual skin traction to keep the delicate neck tissue completely taut. This prevents further petechiae and delivers a smooth, uniform exfoliation.