Study guide

3.1 Safe Working Conditions, Safe Water Temperature, Equipment Maintenance & Electrical Safety

Michigan Nail Technician License Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Michigan License & PSI Exam Orientation

1.1 PSI Manicurist Theory Exam: Format, Blueprint, Scoring & Fees 1.2 Michigan Manicurist Licensure: Eligibility, Training Hours, Reciprocity & Renewal 1.3 Michigan Practice Rules: Establishments, Health & Safety Rules, Prohibitions & Discipline 1.4 The PSI National Manicurist Practical Exam: Topic Areas, Timing, Kit Rules & Scoring

2 Chapter 2: Workplace Infection Control Procedures

2.1 Microbiology, Salon Pathogens & Biofilm Defense 2.2 Levels of Decontamination: Cleaning, Disinfection & Sterilization 2.3 Cleaning & Disinfecting Tools, Equipment & Workstations; Choosing Disinfectant Products 2.4 Single-Use vs. Multi-Use Items, Labeling & Clean Storage 2.5 Exposure Incidents: Standard Precautions, OSHA & MIOSHA, CDC & Michigan's Blood-Spill Rule

3 Chapter 3: Workplace Safety Precautions

3.1 Safe Working Conditions, Safe Water Temperature, Equipment Maintenance & Electrical Safety 3.2 Chemical Safety, OSHA Hazard Communication & Safety Data Sheets (SDS) 3.3 Federal Safety Regulations (OSHA, EPA, FDA) & Prohibited Materials and Substances 3.4 Adverse Reactions to Chemicals, Allergy (Patch) Tests, Protective Barriers & Client Draping

4 Chapter 4: Skin & Nail Structure and Extremity Anatomy

4.1 Anatomy and Physiology of the Natural Nail Unit 4.2 Skin Histology, Layers & Cutaneous Functions 4.3 Bones, Muscles & Nerves of the Hands, Arms, Feet & Legs

5 Chapter 5: Client Consultation, Nail Analysis, Diseases & Disorders

5.1 Nail Disorders, Cosmetic Irregularities & Service Modifications 5.2 Infectious Nail Diseases, Pathologies & Medical Contraindications 5.3 Client Health History, Medical Screening & Service Record Keeping 5.4 Skin Diseases & Disorders of the Hands and Feet; Contraindications to Nail Enhancement Services

6 Chapter 6: Nail Care Services, Massage & Skin-Care Safety

6.1 Professional Manicure Procedures, Arm/Hand Massage & Polish Application 6.2 Pedicure Procedures, Callus Reduction & Foot Basin Disinfection 6.3 Natural Nail Grooming, Abrasives, Paraffin, Hot Towels & Skin-Care Safety

7 Chapter 7: Nail Enhancements, Chemistry & Removal

7.1 Nail Product Chemistry, Polymerization & Organic Systems 7.2 Nail Tips, Sizing & Fabric Wrap Systems 7.3 Liquid and Powder (Acrylic) Enhancements & Rebalancing 7.4 Light-Cured Gels, Dip Powder Systems & Electric Filing Safety

3.1 Safe Working Conditions, Safe Water Temperature, Equipment Maintenance & Electrical Safety

Key Takeaways Explain This Topic AI

CPSC reports most adults suffer third-degree burns in 2 seconds at 150°F, 6 seconds at 140°F, 30 seconds at 130°F, and about 5 minutes at 120°F.

CPSC recommends setting water heaters to 120°F; pedicure water should be tested before a client's feet go in.

Clients with diabetes or neuropathy may not feel scalding water, so the technician, not the client, must check the temperature.

PSI's practical expects tools in safe working order, with no frayed or exposed wires and no rusty metal.

Michigan establishments must have running hot and cold water, adequate ventilation and an ANSI/ISEA Z308.1 first aid kit (R 338.2171).

Last updated: October 2026

Safe working conditions

A safe salon prevents the ordinary injuries that happen around water, chemicals, cords and tools. The PSI practical lists the habits it scores:

  • clean up spills and pick up dropped items so no one slips, trips or falls
  • keep chemicals and products from cross-contaminating on the station
  • mix, store and dispense chemicals correctly (section 3.2)
  • use only tools and equipment in safe working order
  • use them in a safe manner

Build these into the room itself:

Hazard Control

Wet floors around pedicure chairs and sinks Wipe spills at once, use non-slip mats, and keep towels off the floor

Cords across walkways Route cords behind stations. Never run them under rugs or through doorways.

Clutter and dropped tools Pick up dropped items immediately. A dropped tool is contaminated and must be cleaned and disinfected or thrown away.

Chemical spills Follow SDS Section 6 (accidental release). Use absorbent material, ventilate, and throw away soaked material in a closed metal waste can.

Repetitive strain OSHA lists awkward positions and repetitive motions as a nail salon hazard. Adjust chair and table height, support wrists, and take short breaks.

Emergencies Know exits and the first aid kit location. Michigan requires a kit labeled ANSI/ISEA Z308.1 (R 338.2171).

Michigan's facility rule also requires an adequate supply of running hot and cold water . It requires adequate ventilation to prevent concentrations of chemical vapors and strong odors. Waste containers must be covered and stations non-porous.

Safe water temperature

Water is used for finger bowls, pedicure baths, hot towels and cleanup. Hot water can scald quickly. The U.S. Consumer Product Safety Commission (CPSC) gives these burn times for adults:

  • Water temperature Exposure that can cause a third-degree burn
  • 150°F 2 seconds
  • 140°F 6 seconds
  • 130°F 30 seconds
  • 120°F 5 minutes

CPSC urges setting water heaters to 120°F . It notes most tap-water scald injuries happen to older adults and young children. Practical rules for nail services:

Test the water before the client's hands or feet go in. Use a thermometer, or test with your own wrist or inner forearm. The water should feel comfortably warm, not hot.

Never rely on the client to judge. Clients with diabetes, peripheral neuropathy or poor circulation, and many older clients, may not feel heat until skin is injured (section 5.3).

Keep soaks short as your textbook and product directions say. Long soaks soften skin until it tears easily during filing.

Adjust before, not during. Add hot water away from the client, mix, and test again.

Hot towels and paraffin have their own temperature checks (section 6.3).

Safe use and maintenance of equipment

Equipment Safe use and maintenance

Electric file Inspect the cord, handpiece and bits. Use the speed and bit the manufacturer recommends for the task. Keep bits clean and replace worn ones. Never use on broken skin.

UV or LED lamp Use the lamp matched to the gel system. Keep it clean. Replace bulbs or units as the manufacturer directs, since under-curing raises allergy risk.

Pedicure basin or foot spa Follow the after-each-client disinfection rule (section 2.3) and the manufacturer's maintenance schedule. Report leaks or electrical faults and take the unit out of service.

Paraffin heater and towel warmer Check the thermostat, keep lids closed, and clean as the manufacturer directs

Implements Keep cutting edges sharp, joints working and surfaces smooth. Discard rusted, pitted or cracked tools, because they cannot be reliably disinfected.

Chairs and tables Michigan requires non-porous, disinfectable coverings (R 338.2171). Repair tears promptly.

Read the manufacturer's instructions for every device. They set the cleaning method, safe speed or temperature, and inspection schedule. Keep them where staff can find them.

Electrical safety

Electricity plus water is the main risk at a nail station. Basic rules:

Inspect before use. Do not use equipment with frayed or exposed wires, cracked housings, loose plugs or scorch marks. PSI's practical specifically names frayed or exposed wires.

Keep electrical devices away from water. Never handle a plugged-in device with wet hands. Never place a device where it could fall into a basin or finger bowl.

Use grounded outlets and three-prong plugs as designed. Never remove the ground prong. A ground-fault circuit interrupter (GFCI) is the standard protection where equipment is used near water. It cuts power when current leaks to ground.

Do not overload outlets or chain power strips. Unplug by the plug, not the cord.

Use equipment listed by a recognized testing laboratory , such as a UL mark, and use it only for its intended purpose.

Unplug before cleaning a device, and let it cool first.

If a device sparks, shocks or smells of burning, unplug it if safe, stop using it, and have it repaired or replaced.

Putting it together on test day

In the practical, every topic area has a "safety precautions" rating line. Concrete evidence the evaluator can see:

  • a dry floor and closed product bottles
  • cords that are not tangled across the station
  • no dropped items left on the floor
  • tools in good condition
  • water and chemicals handled without splashing

None of this requires extra time if it is a habit.