Study guide

6.2 Guardrails, Safety Nets, Warning Lines, Safety Monitors, Covers & Fall Protection Plans

Michigan Roofing Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Exam & Michigan Licensing Law

1.1 The Michigan Roofing License Exam: Format, Fees & Test-Day Rules 1.2 Who Must Be Licensed: Residential Builder vs. M&A Roofing & the Exemptions 1.3 Prelicensure Education, Application, Renewal & Continuing Competency 1.4 Company Licenses, Qualifying Officers, Salespersons & Reporting Changes 1.5 Rules of Conduct: Place of Business, Advertising, Written Agreements & Records 1.6 Complaints, Investigations, Hearings, Arbitration & Penalties

2 Chapter 2: Codes, Permits, Civil Rights & Environmental Rules

2.1 The State Construction Code, Permits & Inspections 2.2 Civil Rights, Fair Housing, ADA & Michigan Barrier-Free Design 2.3 EPA Hazardous-Materials Rules: Lead-Safe Renovation, Asbestos & Radon

3 Chapter 3: Business Organization, Contracts & In-Home Sales

3.1 Types of Business Organization: Sole Proprietorship, Partnership, LLC & Corporation 3.2 Contract Essentials: Requirements, Types, Terminology & When a Contract Binds 3.3 Addenda, Change Orders, Allowances, Schedules, Warranties, Financing & Breach 3.4 In-Home Sales: The Home Solicitation Sales Act & Door-to-Door Roofing Sales

4 Chapter 4: Project Management, Accounting, Taxes & Personnel

4.1 Project Management & Administration: Quality, Logistics, Schedules, Draws & Retainage 4.2 Accounting & Finance: Costs, Receivables, Cash Flow, Financial Statements & Ratios 4.3 Payroll & Tax Obligations: Federal, Michigan, Unemployment & Sales/Use Tax 4.4 Personnel: MIOSHA Administration, Recordkeeping, Wages, Minors & Benefits

5 Chapter 5: Insurance, Bonds & Construction Liens

5.1 Insurance for Roofing Contractors: Liability, Workers' Compensation, Vehicles, Property & Builders' Risk 5.2 Bonds, Public Works Bonding & the Building Contract Fund Act 5.3 Construction Lien Act I: Notices of Commencement & Furnishing, Sworn Statements & Waivers 5.4 Construction Lien Act II: Claims of Lien, Foreclosure, Priority & Residential Protections

6 Chapter 6: Roofing Safety & Public Protection (MIOSHA)

6.1 MIOSHA Part 45 Fall Protection & Personal Fall Arrest Systems 6.2 Guardrails, Safety Nets, Warning Lines, Safety Monitors, Covers & Fall Protection Plans 6.3 Ladders, Scaffolds, Roof Brackets & Aerial Lifts (MIOSHA Parts 11, 12 & 32) 6.4 Hazard Communication, SDS, Silica, Lead & Asbestos Exposure, Power Lines & Heat 6.5 Hoisting & Lift Equipment, Fire Prevention, PPE, Barricades, Debris & Recycling

7 Chapter 7: Planning, Structure & Estimating

7.1 Roof Types, Framing Terminology & Structural Loads 7.2 Pre-Job Walk-Through, Plans & Details, Permits & Selecting the Roof System 7.3 Roof Geometry, Slope, Pitch & Slope Factors for Measuring Roofs 7.4 Material Takeoffs: Squares, Bundles, Waste, Underlayment, Ice Barrier, Metals & Fasteners 7.5 Labor, Subcontractor & Access Costs and Preparing the Estimate

8 Chapter 8: Tear-Off, Deck Preparation & Underlayment

8.1 Roof Sheathing: Panel Grades, Spans, Edge Support & Nailing 8.2 Tear-Off vs. Recover, Reroofing Rules & Preparing the Site (MRC R908) 8.3 Michigan's Ice Barrier Requirement: Coverage, Materials & Detailing (R905.1.2) 8.4 Underlayment: Standards, Application by Slope & Attachment (R905.1.1) 8.5 Roof & Ceiling Insulation, Vapor Retarders, Air Sealing & Unvented Assemblies

9 Chapter 9: Steep-Slope Roof Systems

9.1 Asphalt Shingles: Types, ASTM D3462, Wind Classes, Impact & Fire Ratings 9.2 Installing Asphalt Shingles: Starter, Exposure, Nailing, Steep Slopes & Caps 9.3 Valleys: Linings, Open Metal, Closed-Cut & Woven Valleys 9.4 Metal Roof Systems, Tile, Slate & Wood Shingles and Shakes

10 Chapter 10: Low-Slope Roof Systems & Drainage

10.1 Single-Ply Membranes: EPDM, TPO & PVC 10.2 Built-Up Roofing & Modified Bitumen: Materials, Application, Kettles & Torch Safety 10.3 Low-Slope Drainage: Positive Drainage, Roof Drains, Overflow Scuppers & Correcting Ponding

11 Chapter 11: Flashings, Transitions & Penetrations

11.1 Drip Edge & Roof-Edge Metals (R905.2.8.5 and R903.2) 11.2 Sidewalls, Headwalls, Kick-Outs, Counterflashing & Pitch Transitions 11.3 Chimneys & Crickets, Skylights, Pipes, Flues, Exhaust Vents & Solar

12 Chapter 12: Ventilation, Inspection & Repair

12.1 Attic Ventilation Requirements & Net Free Vent Area Calculations (MRC R806) 12.2 Balanced Airflow, Vent Installation Practice & Preventing Ice Dams 12.3 Roof Inspections, Leak Diagnosis, Repairs & Roofovers

6.2 Guardrails, Safety Nets, Warning Lines, Safety Monitors, Covers & Fall Protection Plans

Key Takeaways Explain This Topic AI

Guardrail top rails must be 42 inches plus or minus 3 inches high and withstand 200 pounds, midrails must withstand 150 pounds, and toeboards must be at least 3.5 inches high.

Warning lines on low-slope roofs are set at least 6 feet from the edge, or 10 feet where mechanical equipment runs perpendicular to the edge, with the line between 34 and 39 inches high.

A safety monitor alone is allowed only for roofing work on low-slope roofs 50 feet wide or less, and mechanical equipment may not be used or stored where a safety monitor is the protection.

Covers over holes and skylights must support twice the load expected on them, be secured, and be marked "HOLE" or "COVER" or color-coded.

A residential fall protection plan must be site-specific, prepared by a qualified person, kept at the job site, and supervised by a competent person, and it is allowed only when conventional systems are infeasible or more hazardous.

Last updated: September 2026

Guardrail Systems (1926.502(b))

  • Component Requirement
  • Top rail height 42 inches ± 3 inches above the walking/working level

Top rail strength Withstand 200 pounds applied outward or downward within 2 inches of the top edge. Under that load, the rail may not deflect below 39 inches

  • Midrails, screens, mesh Midrail about halfway between top rail and surface. Withstand 150 pounds
  • Openings Intermediate vertical members no more than 19 inches apart
  • Toeboards At least 3.5 inches high, no more than 1/4 inch above the surface, and able to withstand 50 pounds
  • Surface Smooth enough to prevent punctures, lacerations, and snagging
  • Wire rope top rail At least 1/4 inch in diameter or thickness, flagged at no more than 6-foot intervals

On steep roofs, guardrails must have toeboards (1926.501(b)(11)). When materials are piled higher than a toeboard, add paneling or screening high enough to stop them falling over. Remember MIOSHA's Michigan-specific storage rule: while roofing work is performed, materials and equipment may not be stored within 6 feet of a roof edge unless guardrails are erected (R 408.40810(7)).

Safety Nets (1926.502(c))

Nets are installed as close as practicable under the work, and never more than 30 feet below it. They must extend outward from the outermost edge of the working surface:

  • Vertical distance to the net Minimum horizontal extension
  • Up to 5 feet 8 feet
  • More than 5 feet up to 10 feet 10 feet
  • More than 10 feet 13 feet

Nets are drop-tested with a 400-pound bag of sand after installation, after relocation or major repair, and every 6 months if left in place. They are inspected at least weekly, and debris is removed before the next shift. Mesh openings may not exceed 36 square inches or 6 inches on a side, and border rope must be at least 5,000 pounds .

Warning Lines on Low-Slope Roofs (1926.502(f))

Warning lines are allowed only for roofing work on low-slope roofs (4:12 or less), combined with another system or a safety monitor as 1926.501(b)(10) allows.

Erect the line around all sides of the work area, at least 6 feet from the edge. Where mechanical equipment is used, keep it at least 6 feet from an edge parallel to the equipment's direction of travel and at least 10 feet from an edge perpendicular to it.

The rope, wire, or chain is flagged at least every 6 feet with high-visibility material. Its lowest point, including sag, is 34 to 39 inches above the surface.

Stanchions must resist a 16-pound horizontal force applied 30 inches up without tipping. The line must have a tensile strength of at least 500 pounds .

Work inside the warning line needs no other protection. Work between the line and the edge needs one of the combinations in (b)(10).

Safety Monitoring (1926.502(h))

A safety monitor is a competent person designated to watch other workers. The monitor:

  • recognizes fall hazards and warns workers who seem unaware of them or are acting unsafely;
  • is on the same walking surface , within visual sighting distance and close enough to communicate orally;

has no other duties that distract from monitoring.

A monitor alone is allowed only on low-slope roofs 50 feet or less wide . On wider roofs, the monitor must be combined with a warning line. Mechanical equipment may not be used or stored where safety monitoring is the protection. No one other than workers doing roofing on the low-slope roof, or covered by a fall protection plan, may be in the monitored area.

Holes, Skylights, and Covers (1926.501(b)(4) and 1926.502(i))

PSI's outline specifically lists "covering skylights and other openings in roofs for fall protection." Workers must be protected from falling through holes, including skylights , more than 6 feet above lower levels. The options are personal fall arrest, covers , or guardrails around the opening. Workers must also be protected from tripping into holes, and from objects falling through them.

Covers must:

support at least twice the weight of the workers, equipment, and materials that may be on them at one time. Covers in roadways must support twice the largest axle load expected;

  • be secured against displacement by wind, equipment, or workers;
  • be color-coded or marked "HOLE" or "COVER."

A skylight lens or dome is not a cover. Screen it, rail it, or cover it with secured, marked plywood of adequate strength. When the deck is opened during tear-off, such as for chimney removal, treat the hole the same way.

Falling Objects (1926.501(c) and 1926.502(j))

Protect people below with toeboards, screens, or guardrails , canopies, or by barricading the area underneath and keeping people out (Section 6.5). Keep tools and bundles away from edges. Workers below must wear head protection.

Fall Protection Plans and Controlled Access Zones (1926.502(k) and (g))

A residential employer may use a written fall protection plan only after showing that guardrails, nets, and personal fall arrest are infeasible or would create a greater hazard . Cost and inconvenience are not reasons. The plan must:

  • be prepared by a qualified person for the specific site and kept up to date;
  • be kept at the job site , with changes approved by a qualified person;
  • be implemented under the supervision of a competent person ;

state why conventional systems cannot be used and what other measures reduce the hazard, such as safety monitors or controlled access zones ;

identify each worker covered, and be reviewed and changed if anyone falls or has a near miss.

A controlled access zone limits the area to authorized workers. When control lines are used, they are placed 6 to 25 feet from the unprotected edge.

Choosing the Right System

Loading diagram... Choosing a Fall Protection System for Residential Roofing