Study guide
9.1 Asphalt Shingles: Types, ASTM D3462, Wind Classes, Impact & Fire Ratings
Michigan Roofing Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Exam & Michigan Licensing Law
1.1 The Michigan Roofing License Exam: Format, Fees & Test-Day Rules 1.2 Who Must Be Licensed: Residential Builder vs. M&A Roofing & the Exemptions 1.3 Prelicensure Education, Application, Renewal & Continuing Competency 1.4 Company Licenses, Qualifying Officers, Salespersons & Reporting Changes 1.5 Rules of Conduct: Place of Business, Advertising, Written Agreements & Records 1.6 Complaints, Investigations, Hearings, Arbitration & Penalties
2 Chapter 2: Codes, Permits, Civil Rights & Environmental Rules
2.1 The State Construction Code, Permits & Inspections 2.2 Civil Rights, Fair Housing, ADA & Michigan Barrier-Free Design 2.3 EPA Hazardous-Materials Rules: Lead-Safe Renovation, Asbestos & Radon
3 Chapter 3: Business Organization, Contracts & In-Home Sales
3.1 Types of Business Organization: Sole Proprietorship, Partnership, LLC & Corporation 3.2 Contract Essentials: Requirements, Types, Terminology & When a Contract Binds 3.3 Addenda, Change Orders, Allowances, Schedules, Warranties, Financing & Breach 3.4 In-Home Sales: The Home Solicitation Sales Act & Door-to-Door Roofing Sales
4 Chapter 4: Project Management, Accounting, Taxes & Personnel
4.1 Project Management & Administration: Quality, Logistics, Schedules, Draws & Retainage 4.2 Accounting & Finance: Costs, Receivables, Cash Flow, Financial Statements & Ratios 4.3 Payroll & Tax Obligations: Federal, Michigan, Unemployment & Sales/Use Tax 4.4 Personnel: MIOSHA Administration, Recordkeeping, Wages, Minors & Benefits
5 Chapter 5: Insurance, Bonds & Construction Liens
5.1 Insurance for Roofing Contractors: Liability, Workers' Compensation, Vehicles, Property & Builders' Risk 5.2 Bonds, Public Works Bonding & the Building Contract Fund Act 5.3 Construction Lien Act I: Notices of Commencement & Furnishing, Sworn Statements & Waivers 5.4 Construction Lien Act II: Claims of Lien, Foreclosure, Priority & Residential Protections
6 Chapter 6: Roofing Safety & Public Protection (MIOSHA)
6.1 MIOSHA Part 45 Fall Protection & Personal Fall Arrest Systems 6.2 Guardrails, Safety Nets, Warning Lines, Safety Monitors, Covers & Fall Protection Plans 6.3 Ladders, Scaffolds, Roof Brackets & Aerial Lifts (MIOSHA Parts 11, 12 & 32) 6.4 Hazard Communication, SDS, Silica, Lead & Asbestos Exposure, Power Lines & Heat 6.5 Hoisting & Lift Equipment, Fire Prevention, PPE, Barricades, Debris & Recycling
7 Chapter 7: Planning, Structure & Estimating
7.1 Roof Types, Framing Terminology & Structural Loads 7.2 Pre-Job Walk-Through, Plans & Details, Permits & Selecting the Roof System 7.3 Roof Geometry, Slope, Pitch & Slope Factors for Measuring Roofs 7.4 Material Takeoffs: Squares, Bundles, Waste, Underlayment, Ice Barrier, Metals & Fasteners 7.5 Labor, Subcontractor & Access Costs and Preparing the Estimate
8 Chapter 8: Tear-Off, Deck Preparation & Underlayment
8.1 Roof Sheathing: Panel Grades, Spans, Edge Support & Nailing 8.2 Tear-Off vs. Recover, Reroofing Rules & Preparing the Site (MRC R908) 8.3 Michigan's Ice Barrier Requirement: Coverage, Materials & Detailing (R905.1.2) 8.4 Underlayment: Standards, Application by Slope & Attachment (R905.1.1) 8.5 Roof & Ceiling Insulation, Vapor Retarders, Air Sealing & Unvented Assemblies
9 Chapter 9: Steep-Slope Roof Systems
9.1 Asphalt Shingles: Types, ASTM D3462, Wind Classes, Impact & Fire Ratings 9.2 Installing Asphalt Shingles: Starter, Exposure, Nailing, Steep Slopes & Caps 9.3 Valleys: Linings, Open Metal, Closed-Cut & Woven Valleys 9.4 Metal Roof Systems, Tile, Slate & Wood Shingles and Shakes
10 Chapter 10: Low-Slope Roof Systems & Drainage
10.1 Single-Ply Membranes: EPDM, TPO & PVC 10.2 Built-Up Roofing & Modified Bitumen: Materials, Application, Kettles & Torch Safety 10.3 Low-Slope Drainage: Positive Drainage, Roof Drains, Overflow Scuppers & Correcting Ponding
11 Chapter 11: Flashings, Transitions & Penetrations
11.1 Drip Edge & Roof-Edge Metals (R905.2.8.5 and R903.2) 11.2 Sidewalls, Headwalls, Kick-Outs, Counterflashing & Pitch Transitions 11.3 Chimneys & Crickets, Skylights, Pipes, Flues, Exhaust Vents & Solar
12 Chapter 12: Ventilation, Inspection & Repair
12.1 Attic Ventilation Requirements & Net Free Vent Area Calculations (MRC R806) 12.2 Balanced Airflow, Vent Installation Practice & Preventing Ice Dams 12.3 Roof Inspections, Leak Diagnosis, Repairs & Roofovers
9.1 Asphalt Shingles: Types, ASTM D3462, Wind Classes, Impact & Fire Ratings
Key Takeaways Explain This Topic AI
Under R905.2.4, asphalt shingles must comply with ASTM D3462, the standard for fiberglass-mat shingles surfaced with mineral granules.
Asphalt shingles must be tested to ASTM D7158 and labeled with the class required for the design wind speed, or labeled to ASTM D3161 if they fall outside D7158's scope.
At ultimate design wind speeds of 110 to 116 mph, which covers typical Michigan sites, the code accepts ASTM D7158 Class D, G, or H or ASTM D3161 Class A, D, or F.
UL 2218 impact classes run from Class 1 to Class 4, and Class 4 shingles withstand a 2-inch steel ball dropped from 20 feet.
Michigan requires classified (Class A, B, or C) roofing only where a law designates it or where the roof edge is less than 3 feet from a lot line.
Last updated: September 2026
How an Asphalt Shingle Is Built
Modern shingles have a fiberglass mat saturated and coated with asphalt. The top is surfaced with ceramic-coated mineral granules that protect the asphalt from UV, color the shingle, and help with fire resistance. A factory-applied sealant strip bonds each course to the one below when the sun warms it. Algae-resistant shingles use granules with metal additives to slow the black streaks caused by algae.
Type Construction Typical traits
3-tab (strip) Single layer with cutouts forming three tabs. English size about 12 × 36 inches at a 5-inch exposure Lightest and least expensive, with a flat look
Laminated (architectural or dimensional) Two or more layers bonded together, often in metric size about 13 1/4 × 39 3/8 inches at a 5 5/8-inch exposure More texture and weight, and usually higher wind warranties
Designer and luxury Heavier multi-layer shingles that imitate slate or shakes Heaviest. Check the structure and bundles per square
The Material Standard (R905.2.4)
Asphalt shingles must comply with ASTM D3462 , the specification for shingles made from glass felt and surfaced with mineral granules. The standard covers properties such as mass, tear strength (at least 1,700 grams), fastener pull-through, and pliability. Old organic-mat shingles, formerly covered by ASTM D225, are no longer made for the market. You will still see them on tear-offs. They curl and blister as they age.
Wind Resistance (R905.2.4.1)
Asphalt shingles must be tested to ASTM D7158 and meet the classification in Table R905.2.4.1 for the design wind speed. The packaging must carry a label showing D7158 compliance and the class. Shingles outside the scope of D7158 must be tested and labeled to ASTM D3161 instead.
- Ultimate design wind speed, V_ult (mph) Basic wind speed, V_asd (mph) ASTM D7158 class ASTM D3161 class
- 110 85 D, G, or H A, D, or F
- 116 90 D, G, or H A, D, or F
- 129 100 G or H A, D, or F
- 142 110 G or H F
- 155 120 G or H F
- 168 and up 130 and up H F
Michigan's design criteria list a 90 mph basic wind speed . That corresponds to the 116 mph row, so any listed D7158 class (D, G, or H) or D3161 class (A, D, or F) is acceptable for typical Michigan sites. D7158's calculations assume Exposure B or C and buildings no taller than 60 feet. Lakeshore or unusually exposed sites need a site check. Manufacturers' high-wind nailing and sealing instructions also affect warranty coverage.
ASTM D7158 compares the wind uplift force on a sealed shingle with its measured resistance. The classes are D (90 mph), G (120 mph), and H (150 mph). ASTM D3161 is a fan-driven test at set wind speeds: Class A (60 mph), D (90 mph), and F (110 mph).
Impact Resistance (UL 2218)
Hail is common in Michigan's summer storms. UL 2218 drops steel balls on the same spot twice. The product passes if no crack or rupture appears.
- UL 2218 class Steel ball diameter Drop height
- Class 1 1 1/4 in 12 ft
- Class 2 1 1/2 in 15 ft
- Class 3 1 3/4 in 17 ft
- Class 4 2 in 20 ft
The code does not require impact ratings. Owners may want Class 4 shingles for durability or possible insurance discounts. Confirm any discount with the owner's insurer rather than promising one.
Fire Classification (Michigan R902.1)
Roof coverings are fire-tested under UL 790 or ASTM E108 :
Class A: effective against severe fire exposure.
Class B: effective against moderate fire exposure.
Class C: effective against light fire exposure.
Michigan's R902.1 requires Class A, B, or C roofing only where local law designates it or where the roof edge is less than 3 feet from a lot line . Most fiberglass asphalt shingles are Class A rated when installed as listed. Check the package and the manufacturer's listing when a classification is required.
Product Identification, Handling, and Compatibility
R904.4: roof covering materials must be delivered in packages bearing the manufacturer's identifying marks and the testing agency labels required, including the wind class label. Bulk shipments need the same information on a certificate or bill of lading. Keep a wrapper for the inspector.
R904.2: materials must be compatible with each other and with the building.
R904.1 and R905.1: install per this code and the manufacturer's instructions.
Storage: store bundles flat, off the ground, covered, and out of extreme heat or cold. Do not stack bundles so high that the lower ones deform. In cold weather, shingles become stiff and crack more easily. Many manufacturers require hand-sealing when temperatures prevent the sealant from activating.
Choosing a Shingle for a Michigan Job
Confirm the slope: at least 2:12 , with double underlayment below 4:12.
Confirm the wind class label and any site exposure issues.
Confirm weight against the structure and snow load, especially on a recover (R908.2).
Match the manufacturer's system components if the owner wants an enhanced warranty.
Consider impact class, algae resistance, color and heat, and matching existing roofs on additions.