Study guide
2.3 Word & quantitative reasoning problems
DoD Cyber Test Military Cyber Aptitude Test
Track your progress as you read
Finished sections get a check mark.
1 Logical Reasoning
1.1 Pattern recognition & number/letter sequences 1.2 Deductive logic & conditional (if-then) statements 1.3 Algorithmic thinking & flowchart/decision logic
2 Problem Solving
2.1 Structured troubleshooting method & root-cause analysis 2.2 Process flow, debugging approaches & elimination 2.3 Word & quantitative reasoning problems
3 Networking Basics
3.1 IP addressing, subnets, IPv4/IPv6 & DNS 3.2 Protocols: TCP/UDP/HTTP(S)/FTP & common ports 3.3 OSI & TCP/IP models & network topologies
4 Hardware & Software
4.1 Computer components, CPU/memory/storage & operating systems 4.2 Binary, hexadecimal & data representation
5 Cybersecurity Fundamentals
5.1 Encryption, authentication & access control (CIA triad) 5.2 Threats, vulnerabilities, malware & social engineering
6 Test Strategy & Mixed Practice
6.1 Test-taking strategy, timing & mixed full-length practice
2.3 Word & quantitative reasoning problems
Key Takeaways Explain This Topic AI
Multi-step quantitative problems are solved by listing givens with units, naming the target unit, and canceling units through each multiplication.
Network speeds are quoted in bits and file sizes in bytes; divide by eight to convert bits to bytes and multiply by eight to go the other way.
Proportions solve for a missing term by cross-multiplying, as long as the same quantity stays on top of both ratios.
Combined-rate problems add work per unit time, not the times, so two servers taking six and three hours finish together in two hours.
Most wrong answers on the quantitative section come from a units slip, not from difficult arithmetic.
Last updated: July 2026
Setting up multi-step word problems
Quantitative items on the DoD Cyber Test are rarely one calculation; they chain two or three. The winning habit is to write down what you know, note the target, and track units at every step so the answer lands in the right unit.
A four-step routine
List the givens with their units.
Identify the target quantity and its unit.
Choose a bridge , a rate, ratio, or conversion factor that connects givens to target.
Cancel units as you multiply so only the target unit survives.
Rates and throughput
A rate is a quantity per unit of something else, such as files per minute or megabits per second. Throughput and bandwidth problems are rate problems in disguise.
Worked example: A link transfers a nine hundred megabyte file in two minutes. What is the throughput in megabytes per second? Two minutes is one hundred twenty seconds. Nine hundred megabytes divided by one hundred twenty seconds equals seven and one-half megabytes per second. If a second file is one thousand five hundred megabytes, dividing by that same seven and one-half megabytes per second gives two hundred seconds, or three minutes and twenty seconds.
The bits-versus-bytes trap: Network speeds are quoted in bits per second, but file sizes are in bytes , and one byte is eight bits. A one hundred megabit-per-second link does not move one hundred megabytes per second; divide by eight to get twelve and one-half megabytes per second. Forgetting this factor of eight is the most common quantitative error on cyber tests.