Study guide
Exam Format Fee Pass Mark
Minnesota Boiler Operator Study Guide 2026 Exam
Track your progress as you read
Finished sections get a check mark.
1 About Minnesota Boiler Engineer Licenses
About MN Boiler Engineer Licenses Exam Format Fee Pass Mark Special to Chief Class Ladder
2 DLI Authority, Experience & Class Limits
DLI Authority & Affidavit Experience HP Limits by Class Renewal CE & Discipline Basics
3 Boiler Types & Construction
3.1 Firetube vs Watertube 3.2 Cast Iron Modular Boilers 3.3 Hot Water vs Steam Service 3.4 Pressure Parts Construction
4 Combustion, Burners & Draft
Fuels Stoichiometry Excess Air Burners Flame Safeguard Draft Natural Forced Induced Flue Gas Efficiency
5 Feedwater & Water Treatment
Feedwater Systems Deaeration Softening vs Demineralizing Carryover Foaming Priming Blowdown Chemistry Tests
6 Safety Devices & Interlocks
Safety Relief Valves Low Water Cutoffs Flame Failure Interlocks Pressure/Temp Limits Controls
7 Instrumentation & Combustion Controls
Gauges Sight Glass Try Cocks Combustion Controls Modulation Alarms Trips Permissives
8 Steam Systems, Traps & Heat Recovery
Steam Traps Condensate Return Piping Expansion Supports Heat Exchangers Economizers
9 Operations, Emergencies & Layup
Startup Warmup Procedures Normal Watchstanding Rounds Emergency Low Water Flameout Shutdown Layup
10 Maintenance, Inspection & Records
Daily Weekly Monthly Checks Internal External Inspection Prep Tube Cleaning Scale Soot Recordkeeping Logbooks
Exam Format Fee Pass Mark
Key Takeaways Explain This Topic AI
The Minnesota DLI boiler engineer application/exam fee is $50 per attempt and is separate from the two-year license fee
All Minnesota boiler engineer written exams use a 70% minimum passing score
The time limit is 2.5 hours for every boiler exam
DLI's classification chart sets the question count by license: Special and 2-C 50, 2-B 60, 2-A 80, 1-C and 1-B 100, 1-A 130, Chief C and B 115, Chief A 140
After a failing score, wait at least 30 days, then submit a new application and another exam fee (Minn. Stat. § 326B.093)
Last updated: October 2026
Exam Logistics You Must Memorize
Minnesota’s boiler engineer written exams are practical licensing tests, not academic essays. DLI wants to know whether you can apply boiler safety, operations, and Minnesota licensing rules under time pressure. The logistics numbers show up both as direct questions and as “gotcha” choices next to technical answers — so learn them cold before you grind thermodynamics.
Use this section as your exam-day checklist, then drill mixed items at /practice/mn-boiler-operator .
Fee, Pass Mark, and Time
- Item DLI figure Why it matters
- Application / exam fee $50 per attempt Paid when you apply; includes the written exam seat
- Passing score 70% minimum Same pass mark across boiler engineer exams
- Time limit 2.5 hours Applies to all boiler exams
Question count Set by license on DLI's classification chart: Special 50, 2-C 50, 2-B 60, 2-A 80, 1-C 100, 1-B 100, 1-A 130, Chief C 115, Chief B 115, Chief A 140 A-grade exams include B-grade content; 140 items in 2.5 hours is about one minute per question
Fail / retake At least 30 days after the failed exam, then reapply and repay the exam fee (Minn. Stat. § 326B.093) Do not plan a same-week retake
Missed appointment One reschedule without reapplying or paying a second exam fee (DLI) Show up or reschedule early
The $50 fee is the gatekeeping number candidates remember — and the exam loves to pair it with distractors like “license renewal fee” or “inspection fee.” After you pass, you still owe the two-year license fee , which is separate and class-dependent (Special is typically lower; Chief is higher).
70% is not “mostly right.” On a 100-question exam, you need at least 70 correct . On a 50-question Special exam, you need at least 35 correct . Build a study plan that leaves margin above 70% so a few tricky safety-valve or water-chemistry items do not drop you under the line.
2.5 hours sounds generous until you hit long scenario stems. A workable pacing plan for the longer papers (100 to 140 items) is:
First pass: answer every item you know in under 60–75 seconds.
Flag calculation or multi-step safety scenarios.
Second pass: use remaining time on flags only.
Final minutes: check that you did not leave blanks; unanswered items cannot help you reach 70%.
What the Written Exam Feels Like
Expect questions drawn from boiler operations, safety and emergency response, maintenance and inspection awareness, feedwater/combustion basics, and Minnesota licensing rules. DLI publishes no content outline or topic weights for the boiler exams; its boiler guide suggests textbooks by grade (for example, Low Pressure Boilers for Grade C and High Pressure Boilers for Grade B). DLI is checking whether you will do the safe thing when water disappears from the glass or a safety valve fails to lift.
Question styles to practice: definitions with a twist (high-pressure steam is above 15 psig ), device purpose (low-water cutoff, safety valve, try cocks), license logic (which class/letter may take charge), and procedure order (startup, shutdown, blowdown, emergency isolation).
Bring only what DLI allows. Assume a closed-book written test unless your notice says otherwise. Arrive early with identification and approval paperwork; a late arrival can burn the seat you already paid $50 for.
Application Path Before Exam Day
For grades above Special, the written exam is the last step, not the first. Typical sequence:
Gain operating experience while licensed (Minnesota residents may claim only experience gained while they held a valid license, so most start with Special).
Complete a notarized affidavit that documents hours/months, boiler types, and pressures (Rule 5225.0550 controls who may sign).
Apply through DLI’s licensing system and pay the $50 exam fee.
Wait for approval, then schedule the written exam.
Pass at 70% within the 2.5-hour limit.
Pay the separate two-year license fee to receive the card.
Incomplete affidavits are a common delay. If the signer is not authorized, or the horsepower/pressure history is vague, DLI can bounce the file before you ever see a question. Special Engineer skips the prior-license experience requirement, which is why many candidates start there — but Special still requires the application, fee, and a passing written score.
Retakes, Renewal, and Lapses
Failing is expensive in time, not only money. After a fail, you must wait at least 30 days before a new application, and pay another exam fee. Use that month deliberately: rebuild weak domains with timed sets at /practice/mn-boiler-operator , and rewrite missed topics in your own words.
Licenses renew on a two-year cycle (commonly ending at the end of the issuance month). Letting a license expire more than two years often means retesting before reinstatement. That policy is why working engineers treat renewal reminders like safety-valve tests — ignore them and the recovery cost jumps from a renewal fee to another full exam cycle.
Exam-Day Mindset
Think like the engineer in charge of a live plant. When two answers look plausible, prefer the choice that protects people and equipment first (secure fuel, restore level safely, follow lockout logic) over the choice that only “keeps production running.” Minnesota’s pass mark is 70% , but the professional standard behind the license is closer to “do not gamble with low water.”
Before you schedule, confirm you can recite fee, pass mark, time, and retake wait; know your paper's question count on DLI's chart (50 for Special up to 140 for Chief A); and verify any required affidavit is properly signed. Then study content — not logistics.